Hydroxyapatite-TiO2-SiO2-Coated 316L Stainless Steel for Biomedical Application
Source abstract
Abstract
This study investigated the effectiveness of titania (TiO2) as a reinforcing phase in the hydroxyapatite (HAP) coating and silica (SiO2) single layer as a bond coat between the TiO2-reinforced hydroxyapatite (TiO2/HAP) top layer and 316L stainless steel (316L SS) substrate on the corrosion resistance and mechanical properties of the underlying 316L SS metallic implant. Single layer of SiO2 film was first deposited on 316L SS substrate and studied separately. Water contact angle measurements, X-ray photoelectron spectroscopy, and Fourier transform infrared spectrophotometer analysis were used to evaluate the hydroxyl group reactivity at the SiO2 outer surface. The microstructural and morphological results showed that the reinforcement of HAP coating with TiO2 and SiO2 reduced the crystallite size and the roughness surface. Indeed, the deposition of 50 vol pct TiO2-reinforced hydroxyapatite layer enhanced the hardness and the elastic modulus of the HAP coating, and the introduction of SiO2 inner layer on the surface of the 316L SS allowed the improvement of the bonding strength and the corrosion resistance as confirmed by scratch studies, nanoindentation, and cyclic voltammetry tests.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Titanium Alloys Microstructure and Properties · Orthopaedic implants and arthroplasty
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. E.C. Shores, R.E. Holmes: An Introduction to Bioceramics, in: L.L. Hench, J. Wilson (Eds.), World Scientific: Singapore, 1993, pp. 181–98.
2. Marc Long, H.J. Rack: Biomaterials, 1998, vol. 19, pp. 1621–39.10.1016/S0142-9612(97)00146-4 ↗
3. M. Navarro, A. Michiardi, O Castaño, J.A Planell: J. R. Soc. Interface, 2008, vol. 5, pp. 1137–58.10.1098/rsif.2008.0151 ↗
4. H. Hermawan, D. Ramdan, J.R.P. Djuansjah: Metals for Biomedical Applications, Biomedical Engineering - From Theory to Applications, Prof. Reza Fazel (Ed.), InTech, Available from: http://www.intechopen.com/books/biomedical-engineering-from-theory-toapplications/, 2011.10.5772/19033 ↗
5. V.P. Mantripragada, B. Lecka-Czernik, N.A. Ebraheim, A.C. Jayasuriya; J. Biomed. Mater. Res. A, 2013, vol. 101, pp. 3349–64.10.1002/jbm.a.34605 ↗
6. M. Navarro, A. Michiardi, O. Castano, J. Planell: J. R. Soc. Interface, 2008, vol. 5, pp. 1137–58.10.1098/rsif.2008.0151 ↗
7. [7] J.A. Disegi, L. Eschbach: Injury, 2000, vol. 31, pp. 2–6.10.1016/S0020-1383(00)80015-7 ↗
8. J. Blumn, K.L. Eckert, A. Schroeder, M. Petitmermet, S.W. Ha, E. Wintermantel: Proceedings of the 9th International Symposium on Ceramics in Medicine, in: T. Kokubo, T. Nakamura, F. Miyaji (Eds.), Col. 9, Otsu, Japan, 1996, pp. 89.
9. S. Nagarajan, N. Rajendran: Appl. Surf. Sci., 2009, vol. 255, pp. 3927–32.10.1016/j.apsusc.2008.10.058 ↗
10. H.W. Kim, Y.H. Koh, L.H. Li, S. Lee, H.E. Kim: Biomaterials, 2004, vol. 25, pp. 2533–38.10.1016/j.biomaterials.2003.09.041 ↗
11. C.E. Wen, W. Xu, W.Y. Hu, P.D. Hodgson: Acta Biomater., 2007, vol. 3, pp. 403–10.10.1016/j.actbio.2006.10.004 ↗
12. T.P. Singh, Harpreet Singh, Hazoor Singh: J. Therm. Spray Technol., 2012, vol. 21, pp. 917–27.
13. P.C. Rath, L. Besra, B.P. Singh, S. Bhattacharjee: Ceram. Inter., 2012, vol. 38, pp. 3209–16.10.1016/j.ceramint.2011.12.026 ↗
14. D. Sidane, D. Chicot, S. Yala, F. Bir, H. Khireddine, S. Ziani, A. Iost, X. Decoopman: Thin Solid Films, 2015, vol. 593, pp. 71–80.10.1016/j.tsf.2015.09.037 ↗
15. A.J. Nathanael, N. Sabari Arul, N. Ponpandian, D. Mangalaraj, P. C Chen: Thin Solid Films, 2010, vol. 518, pp. 7333–38.10.1016/j.tsf.2010.04.105 ↗
16. A.J. Nathanael, D. Mangalaraj, N. Ponpandian: Compos. Sci. Technol., 2010, vol. 70, pp. 1645–51.10.1016/j.compscitech.2010.06.010 ↗
17. H. Li, K.A. Khor, P. Cheang: Biomaterials, 2003, vol. 24, pp. 949–57.10.1016/S0142-9612(02)00431-3 ↗
18. P. Li, C. Ohtsuki, T. Kokubo K. Nakanishi, N. Soga, T. Nakamura and T. Yamamuro: J. Am. Ceram. Soc, 1992, vol.75, pp. 2094–97.10.1111/j.1151-2916.1992.tb04470.x ↗
19. P. Li, C. Ohtsuki, T. Kokubo, K. Nakanishi, N. Soga, K. de Groot: J. Biomed. Mater. Res., 1994, vol. 28, pp. 7–15.10.1002/jbm.820280103 ↗
20. P. Galliano, J. J. Damborenea, M. J. Pascual, A. Duran: J. Sol-Gel Sci. Technol., 1998, vol. 13, 723–27.10.1023/A:1008653208083 ↗
21. S. Kim, P.N. Kumta: Mater. Sci. Eng. B, 2004, vol. 111, pp. 232–36.10.1016/j.mseb.2004.04.011 ↗
22. A. Balamurugan, S. Kannan, S. Rajeswari: Mater. Lett., 2005, vol. 59, pp. 3138–43.10.1016/j.matlet.2005.05.036 ↗
23. T. Kokubo, H. Takadama: Biomaterials, 2006, vol. 27, pp. 2907–15.10.1016/j.biomaterials.2006.01.017 ↗
24. J.E. Field, R.H. Telling: The young modulus and poisson ratio of diamond, Research Note, Cavendish Laboratory, Cambridge, 1999.
25. M. Houmard, E.H.M. Nunes, D.C.L. Vasconcelos, G. Berthomé, J.-C. Joud, M. Langlet, W.L. Vasconcelos: Appl. Surf. Sci. 2014, vol. 289, pp. 218–23.10.1016/j.apsusc.2013.10.137 ↗
26. S. Permpoon, G. Berthomé, B. Baroux, J.C. Joud, M. Langlet: J. Mater. Sci., 2006, vol. 41, pp. 7650–62.10.1007/s10853-006-0858-1 ↗
27. L. Zhang, Z. Xing, H. Zhang, Z. Li, X. Wu, X. Zhang, Y. Zhang, W. Zhou: Appl. Catal. B., 2016, vol. 180, pp. 521–29.10.1016/j.apcatb.2015.07.002 ↗
28. P.K. Jal, M. Sudarshan, A. Saha, S. Patel and B.K. Mishra: Colloids Surf. A: Chem. Phys. Eng. Asp., 2004, vol. 240, pp. 173–78.10.1016/j.colsurfa.2004.03.021 ↗
29. V.A. Ermoshin, K.S. Smirnov, D. Bougeard: Surf. Sci., 1996, vol. 368, pp. 147–51.10.1016/S0039-6028(96)01043-6 ↗
30. N. Primeau, C. Vautey, M. Langlet: Thin Solid Films, 1997, vol. 310, pp. 47–56.10.1016/S0040-6090(97)00340-4 ↗
31. M. Houmard, D. Riassett, F. Roussel, A. Bourgeois, G. Berthomé, J.C. Joud, M. Langlet: Surf. Sci., 2008, vol. 602, pp. 3364–74.10.1016/j.susc.2008.09.016 ↗
32. D. Sidane, H. Khireddine, S. Yala, S. Ziani, F. Bir, D. Chicot: Metall. Mater. Trans. B, 2015, vol. 46 B, pp. 2340–47.10.1007/s11663-015-0397-8 ↗
33. C. Ergun: J Eur Ceram Soc, 2008, vol. 28, pp. 2137–49.10.1016/j.jeurceramsoc.2008.03.007 ↗
34. C.C. Ribeiro, I. Gibson, M.A .Barbosa: Biomaterials, 2006, vol. 27, pp. 1749–61.10.1016/j.biomaterials.2005.09.043 ↗
35. H. Anmin, L. Ming, C. Chengkang, M. Dali: J. Mol. Catal. A: Chem., 2007, vol. 26, 779–85.
36. S. Yala, H. Khireddine, D. Sidane, S. Ziani, F. Bir: J. Mater. Sci., 2013, vol. 48, pp. 7215–23.10.1007/s10853-013-7538-8 ↗
37. S. Yugeswaran, A. Kobayashi, A. Hikmet Ucisik, B. Subramanian: Appl. Surf. Sci., 2015, vol. 347, pp. 48–56.10.1016/j.apsusc.2015.04.036 ↗
38. Y. Huang, Q. Ding, X. Panga, S. Hana, Y. Yan: Appl. Surf. Sci., 2013, vol. 282, pp. 456– 62.10.1016/j.apsusc.2013.05.152 ↗
39. A.S. Toloei, A. Stoilov, and D.O. Northwood: WIT Trans. Eng. Sci., 2013, vol. 77, pp. 193–204.10.2495/MC130171 ↗
40. A. Balamurugan, S. Kannan, and S. Rajeswari: Mater. Lett., 2005, vol. 59, pp. 3138–43.10.1016/j.matlet.2005.05.036 ↗
41. M. Houmard: PhD. Thesis, INP Grenoble, France, 2009.
42. B. Aksakal, M. Gavgali, B. Dikici: J. Mater. Eng. Perform, 2010, vol. 19, pp. 894–99.10.1007/s11665-009-9559-7 ↗
43. A. Büyüksagisa, N. Çiftçi, Y. Ergün, Y. Kayali: Prot. Met. Phys. Chem., 2011, vol. 47, pp. 670–79.10.1134/S2070205111050054 ↗
44. H. Buckle: The Science of hardness testing and its research applications, in: J.W. Westbrook, H. Conrad, (Eds.), ASM, Metals Park, OH 1973, pp. 453–91.
45. Y. Sun, T. Bell, S. Zheng: Thin Solid Films, 1995, vol. 258, pp. 198–204.10.1016/0040-6090(94)06357-5 ↗
46. Z.H. Xu, D. Rowcliffe: Thin Solid Films, 2004, vol. 447–448, pp. 399–405.10.1016/S0040-6090(03)01071-X ↗
47. W.C. Oliver, G.M. Pharr: J. Mater. Res., 1992, vol. 7, pp. 1564–83.10.1557/JMR.1992.1564 ↗
48. T. Chudoba, N. Schwarzer, F. Richter: Surf. Coat. Technol., 2002, vol. 154, pp. 140–51.10.1016/S0257-8972(02)00016-6 ↗
49. F. Cleymand, O. Ferry, R. Kouitat, A. Billard, J. von Stebut: Surf. Coat. Technol., 2005, vol. 200, pp. 890–93.10.1016/j.surfcoat.2005.02.086 ↗
50. T. Ohmura, S. Matsuoka, K. Tanaka, T. Yoshida: Thin Solid Films, 2001, vol. 385, pp. 198–204.10.1016/S0040-6090(00)01907-6 ↗
51. M.F. Doerner, W.D. Nix, J. Mater. Res. 1986, vol. 1, pp. 601–09.10.1557/JMR.1986.0601 ↗
52. J. Mencik, D. Munz, E. Quandt, E.R. Weppelmann, M.V. Swain, J. Mater. Res., 1997, vol. 12, pp. 2475–92.10.1557/JMR.1997.0327 ↗
53. J.M. Antunes, J.V. Fernandes, N.A. Sakharova, M.C. Oliveira, L.F. Menezes, Int. J. Solids Struct., 2007, vol. 44, pp. 8313–34.10.1016/j.ijsolstr.2007.06.015 ↗
54. H. Gao, C.H. Chiu, J. Lee: Int. J. Solids. Struct., 1992, vol. 29, pp. 2471–92.10.1016/0020-7683(92)90004-D ↗
55. A. Perriot, E. Barthel: J. Mater. Res., 2004, vol. 19(02), pp. 600–08.10.1557/jmr.2004.19.2.600 ↗
56. F. Roudet, D. Chicot, X. Decoopmana, A. Iost, J. Bürgi, J. Garcia-Molleja, L. Nosei, J. Feugeas: Thin Solid Films, 2015, vol. 594, pp. 129–37.10.1016/j.tsf.2015.10.010 ↗
57. M. Avrami: J. Chem. Phys., 1940, vol. 8, pp. 212–24.10.1063/1.1750631 ↗
58. M. Avrami: J. Chem. Phys., 1941, vol. 9, pp. 177–84.10.1063/1.1750872 ↗
59. J. Song, Y. Liu, Y. Zhang, L. Jiao: Mater. Sci. Eng. A, 2011, vol. 528, pp. 5421–27.10.1016/j.msea.2011.03.078 ↗
60. X. Wang, S. Xu, S. Zhou, W. Xu, M. Leary, P. Choong, M. Qian, M. Brandt, Y. Min Xie: Biomaterials, 2016, vol. 83, pp. 127–41.10.1016/j.biomaterials.2016.01.012 ↗
61. A.J. Nathanael, Y.M. Ima, T.H. Oha, R. Yuvakkumarb, D. Mangalarajc: Appl. Surf. Sci., 2015, vol. 332, pp. 368–78.10.1016/j.apsusc.2015.01.168 ↗
62. D. Sidane, H. Rammal, A. Beljebbar, S.C. Gangloff, D. Chicot, F. Velard, H. Khireddine, A. Montagne and H. Kerdjoudj: Mater. Sci. Eng. C, 2017, vol. 72, pp. 650–58.10.1016/j.msec.2016.11.129 ↗