Electrochemical Corrosion Behavior of Spray-Formed Boron-Modified Supermartensitic Stainless Steel
Source abstract
Abstract
Spray-formed boron-modified supermartensitic stainless steel (SMSS) grades are alloys developed to withstand severe wear conditions. The addition of boron to the conventional chemical composition of SMSS, combined with the solidification features promoted by the spray forming process, leads to a microstructure composed of low carbon martensitic matrix reinforced by an eutectic network of M2B-type borides, which considerably increases the wear resistance of the stainless steel. Although the presence of borides in the microstructure has a very beneficial effect on the wear properties of the alloy, their effect on the corrosion resistance of the stainless steel was not comprehensively evaluated. The present work presents a study of the effect of boron addition on the corrosion resistance of the spray-formed boron-modified SMSS grades by means of electrochemical techniques. The borides fraction seems to have some influence on the repassivation kinetics of the spray-formed boron-modified SMSS. It was shown that the Cr content of the martensitic matrix is the microstructural feature deciding the corrosion resistance of this sort of alloys. Therefore, if the Cr content in the alloy is increased to around 14 wt pct to compensate for the boron consumed by the borides formation, the corrosion resistance of the alloy is kept at the same level of the alloy without boron addition.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. J. J. Dufrane: in Supermartensitic Stainless Steels 99, Brussels, Belgium, 1999, pp. 19–24.
2. P. Toussaint, and J. J. Dufrane: in Supermartensitic Stainless Steel 2002, Brussels, Belgium, 2002.
3. C. A. Della Rovere, C. R. Ribeiro, R. Silva, L. F S Baroni, N. G. Alcântara, and S. E. Kuri: Mater. Sci. Eng. A, 2013, vol. 586, pp. 86–92.10.1016/j.msea.2013.08.014 ↗
4. Y. Kondo, K., Ueda, M., Ogawa, K., Amaya, H., Hirata, H., Takabe, and H., Miyazaki: in Supermartensitic Stainless Steels 99, Brussels, Belgium, 1999, pp. 11–18.
5. G. Y. Koga, R. P. Nogueira, V. Roche, A. R. Yavari, A. K. Melle, J. Gallego, C. Bolfarini, C. S. Kiminami, and W. J. Botta: Surf. Coatings Technol., 2014, vol. 254, pp. 238–43.10.1016/j.surfcoat.2014.06.022 ↗
6. P. Sharma and J. D. Majumdar: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2015, vol. 46, pp. 3157–65.10.1007/s11661-015-2893-5 ↗
7. D. J. Branagan, W. D. Swank, D. C. Haggard, and J. R. Fincke: Metall. Mater. Trans. A, 2001, vol. 32, pp. 2615–21.10.1007/s11661-001-0051-8 ↗
8. S. H. C. Park, Y. S. Sato, H. Kokawa, K. Okamoto, S. Hirano, and M. Inagaki: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2009, vol. 40, pp. 625–36.10.1007/s11661-008-9709-9 ↗
9. C. -K. Fang and T. H. Chuang: Metall. Mater. Trans. A, 1999, vol. 30, pp. 941–48.10.1007/s11661-999-0147-0 ↗
10. T. Zhang and D. Y. Li: Metall. Mater. Trans. A, 2002, vol. 33, pp. 1981–89.10.1007/s11661-002-0031-7 ↗
11. G. Zepon, C. S. Kiminami, W. J. Botta, and C. Bolfarini: Mater. Res. J. Mater., 2013, vol. 16, pp. 642–46.10.1590/S1516-14392013005000026 ↗
12. C.-N. Chang and F.-S. Chen: Mater. Chem. Phys., 2003, vol. 82, pp. 281–87.10.1016/S0254-0584(03)00234-7 ↗
13. G. Abbas, and U. Ghazanfar: 20th Icaleo 2001, Vols 92 93, Congr. Proc., 2001, pp. 679–84.10.2351/1.5059923 ↗
14. D. H. Nam, K. Lee, and S. Lee: Metall. Mater. Trans. a-Physical Metall. Mater. Sci., 2007, vol. 38A, pp. 1193–1201.10.1007/s11661-007-9186-6 ↗
15. G. Zepon, A.R.C. Nascimento, A.H. Kasama, R.P. Nogueira, C.S. Kiminami, W.J. Botta, and C. Bolfarini: Mater. Des., 2015, vol. 83, pp. 214–23.10.1016/j.matdes.2015.06.020 ↗
16. A. Basak, D.K. Roy, and G.L. Dutta: Wear, 1995, vol. 184, pp. 241–44.10.1016/0043-1648(94)06548-9 ↗
17. D. Uzunsoy: Mater. Des., 2010, vol. 31, pp. 3896–3900.10.1016/j.matdes.2010.02.053 ↗
18. T. Singh and G. Sundararajan: Metall. Trans. A, 1990, vol. 21, pp. 3187–99.10.1007/BF02647314 ↗
19. G. Straffelini, A. Molinari, and D. Trabucco: Metall. Mater. Trans. A, 2002, vol. 33, pp. 613–24.10.1007/s11661-002-0123-4 ↗
20. N. Yüksel and S. Şahin: Mater. Des., 2014, vol. 58, pp. 491–98.10.1016/j.matdes.2014.02.032 ↗
21. A. Schulz, V. Uhlenwinkel, C. Escher, R. Kohlmann, A. Kulmburg, M.C. Montero, R. Rabitsch, W. Schützenhöfer, D. Stocchi, and D. Viale: Mater. Sci. Eng. A, 2008, vol. 477, pp. 69–79.10.1016/j.msea.2007.08.082 ↗
22. D. M. Goudar, K. Raju, V. C. Srivastava, and G. B. Rudrakshi: Mater. Des., 2013, vol. 47, pp. 489–96.10.1016/j.matdes.2012.11.010 ↗
23. D. M. Goudar, K. Raju, V.C. Srivastava, and G.B. Rudrakshi: Mater. Des., 2013, vol. 51, pp. 383–90.10.1016/j.matdes.2013.04.018 ↗
24. A.H. Kasama, A.J. Mourisco, C.S. Kiminami, W.J. Botta, and C. Bolfarini: Mater. Sci. Eng. A, 2004, vol. 375–377, pp. 589–94.10.1016/j.msea.2003.10.093 ↗
25. T.T. Matsuo, C.S. Kiminami, W.J. Botta, and C. Bolfarini: Wear, 2005, vol. 259, pp. 445–52.10.1016/j.wear.2005.01.021 ↗
26. V. C. Srivastava, G. B. Rudrakshi, V. Uhlenwinkel, and S. N. Ojha: J. Mater. Sci., 2009, vol. 44, pp. 2288–99.10.1007/s10853-008-2924-3 ↗
27. T.A. Adler and R.P. Walters: Corros. Sci., 1992, vol. 33, pp. 1855–76.10.1016/0010-938X(92)90189-A ↗
28. G. Zepon, N. Ellendt, V. Uhlenwinkel, and C. Bolfarini: Metall. Mater. Trans. A-Physical Metall. Mater. Sci., 2016, vol. 47, pp. 842–51.10.1007/s11661-015-3253-1 ↗
29. N.J. Calos, E. Graham, D. R. Cousens, P. Christodoulou, C.H.L. Kennard, L.K. Bekessy, and S.F. Parker: Mater. Trans., 2001, vol. 42, pp. 496–501.10.2320/matertrans.42.496 ↗
30. P.E. Busby, M.E. Warga, and C. Wells: Trans. Am. Inst. Min. Metall. Eng., 1953, vol. 197, pp. 1463–68.
31. R. A. Mesquita and C.A.Barbosa: Mater. Sci. Eng. A, 2004, vol. 383, pp. 87–95.10.1016/j.msea.2004.02.035 ↗