journal article·2017-03

Microstructure, Tensile Properties, and Hot-Working Characteristics of a Hot Isostatic-Pressed Powder Metallurgy Superalloy

Litao Chang, Wenru Sun, Yuyou Cui, Rui Yang

Publisher page

Abstract

A series of microstructure observation, tensile, and hot compression tests were conducted to investigate the variation of microstructure, tensile properties, and hot-working characteristics of a powder metallurgy (PM) superalloy with hot isostatic pressing (HIPing) temperature, to establish a basis for the parameter selection for PM superalloy preparation. The results show that the dendritic structure from the powder was not completely removed until the HIPing temperature is above the γ′ solvus; γ/γ′ eutectic formed when the powder particles were HIPed at 1533 K (1260 °C) or above. Prior particle boundaries (PPBs) were observed in alloys HIPed at 1513 K (1240 °C) and below; the PPB decoration is serious in alloys HIPed at 1483 K and 1513 K (1210 °C and 1240 °C), owing to melting and aggregation of the boride phase at the particle boundaries during HIPing; the PPBs were eliminated when the HIPing was done at 1533 K (1260 °C) or above. Tensile fracture mode of the alloy changes from inter-particle and transgranular mixed fracture to transgranular fracture with increasing HIPing temperature, which is in accordance with the change in precipitate distribution at the PPBs. The hot workability of alloy is poor for all combinations of HIPing/deformation conditions except for HIPing at sub-solvus temperature and deformation at low strain rates.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Metal Alloys Wear and Properties · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. H. Fecht and D. Furrer: Adv. Eng. Mater., 2000, vol. 2, pp. 777–87.10.1002/1527-2648(200012)2:12<777::AID-ADEM777>3.0.CO;2-R ↗
2. T.M. Pollock and S. Tin: J Propul. Power, 2006, vol. 22, pp. 361–74.10.2514/1.18239 ↗
3. R.C. Reed: The superalloys, fundamentals and applications, vol. 22–24, Cambridge University Press, Cambrige, 2006.10.1017/CBO9780511541285 ↗
4. S.L. Semiatin, J.M. Shank, W.M. Saurber, A.L. Pilchak, D.L. Ballard, F. Zhang and B. Gleeson: Metall. Mater. Trans. A, 2013, vol. pp. 1–18.
5. S.L. Semiatin, K.E. McClary, A.D. Rollett, C.G. Roberts, E.J. Payton, F. Zhang and T.P. Gabb: Metall. Mater. Trans. A, 2013, vol. pp. 1–21.
6. L.T. Chang, W.R. Sun, Y.Y. Cui, F.Q. Zhang and R. Yang: J. Alloys Compd., 2014, vol. 590, pp. 227–32.10.1016/j.jallcom.2013.12.107 ↗
7. D. Furrer and H. Fecht: JOM, 1999, vol. 51, pp. 14–17.10.1007/s11837-999-0005-y ↗
8. R. Menzies, J. Edington and G. Davies: Met. Sci., 1981, vol. 15, pp. 210–16.10.1179/030634581790426651 ↗
9. J.N. Fleckl, V.K. Chandhok and L.P. Clark: Superalloys 1976, B.H. Kear eds., Claitor’s Publishing, Champion, 1976, pp. 509–21.10.7449/1976/Superalloys_1976_509_521 ↗
10. J.L. Bartos and P.S. Mathur: Superalloys 1976, B.H. Kear eds., Claitor’s Publishing, Champion, 1976. pp. 495–508.10.7449/1976/Superalloys_1976_495_508 ↗
11. R.D. Eng and D.J. Evans: Superalloys 1980, J.K. Tien, S.T. Wlodek, H.M. III, M. Gell and G.E. Maurer eds., TMS, Champion, 1980, pp. 491–500.10.7449/1980/Superalloys_1980_491_500 ↗
12. G. Raisson: Powder Metall, 2008, vol. 51, pp. 10–13.10.1179/174329008X286631 ↗
13. G.E. Maurer, W. Castledine, F.A. Schweizer and S. Mancuso: Superalloys 1996, R.D. Kissinger, D.J. Deye, D.L. Anton and A.D. Cetel eds., TMS, Champion, 1996, pp. 645–52.10.7449/1996/Superalloys_1996_645_652 ↗
14. Y. Zhang, F. Wang and B. Hu: Acta Metall Sin, 2013, vol. 48, pp. 1011–17.10.3724/SP.J.1037.2012.00136 ↗
15. R. Couturier, H. Burlet, S. Terzi, S. Dubiez, L. Guetaz and G. Raisson: Superalloys 2008, R.C. Reed, K.A. Green, P. Caron, T.P. Gabb, M.G. Fahrmann, E.S. Huron and S.R. Woodard eds., TMS, Seven springs mountain, 2008, pp. 351–59.
16. L.T. Chang, W.R. Sun, Y.Y. Cui and R. Yang: Mater. Sci. Eng. A, 2014, vol. 599, pp. 186–95.10.1016/j.msea.2014.01.095 ↗
17. L.T. Chang, W.R. Sun, Y.Y. Cui and R. Yang: The 8th Symposium on Superalloy 718 and Derivatives E. Ott, A. Banik, J. Anderson, I. Dempster, T. Gabb, J. Groh, K. Heck, R. Helmink, X. Liu and A. Wusatowska-Sarnek eds., TMS, Pittsburgh, 2014. pp. 447–58.
18. L.T. Chang, W.R. Sun, Y.Y. Cui and R. Yang: Mater. Sci. Eng. A, 2017, vol. 682, pp. 341–44.10.1016/j.msea.2016.11.031 ↗
19. E.J. Payton: Ph.D Dissertation, The Ohio State University, Ohio, 2009.
20. Y. Liu, Y. Tao and J. Jia: Powder Metall. Indust., 2011, vol. 21, pp. 14-18.
21. T.P. Gabb and K.O. Connor: report NASA/TM-2001-210901, NASA Glenn Research Centre, Cleveland, http://gltrs.grc.nasa.gov.
22. T.P. Gabb, A. Garg and K.O. Connor: Report NASA/TM—2004-213066, NASA Glenn Research Centre, Cleveland. http://gltrs.grc.nasa.gov.
23. E.J. Payton: Ph.D Dissertation, The Ohio State University, OH, 2009.
24. S. Nair and J. Tien: Metall. Trans. A, 1987, vol. 18, pp. 97–107.10.1007/BF02646226 ↗
25. X. Pierron, A. Banik, G. Maurer, J. Lemsky, D. Furrer and S. Jain: Superalloys 2000, K.A. Green, T.M. Pollock and R.D. Kissinger eds., TMS, Champion, 2000. pp. 425–33.10.7449/2000/Superalloys_2000_425_433 ↗
26. W.C. Witt and J.A. Charles: Mater. Sci. Technol, 1985, vol. 1, pp. 1063–68.10.1179/mst.1985.1.12.1063 ↗
27. E.S. Huron, R.L. Casey, M.F. Henry and D.P. Mourer: Superalloys 1996, R.D. Kissinger, D.J. Deye, D.L. Anton and A.D. Cetel eds, TMS, Champion, 1996. pp. 667–76.10.7449/1996/Superalloys_1996_667_676 ↗
28. G.A.J. Back and J.W. Eggar: Powder Metallurgy Superalloys: Aerospace Materials for the 1980′s, eds., Zurich, 1980. pp. 1–50.
29. G. Wang, Z. Zheng, L.T. Chang, L. Xu, Y.Y. Cui and R. Yang: Acta Metall Sin, 2011, vol. 47, pp. 1263–69.
30. [30] H.-s. Liu, L. Zhang, X.-b. He, X.-h. Qu, H.-m. Zhu and G.-q. Zhang: Int J Miner Metall Mater, 2012, vol. 19, pp. 827–35.10.1007/s12613-012-0635-x ↗
31. R.G. Menzies, R.H. Bricknell and A.J. Craven: Phil. Mag. A, 1980, vol. 41, pp. 493–508.10.1080/01418618008239328 ↗
32. M.S.A. Karunaratne and R.C. Reed: Acta Mater, 2003, vol. 51, pp. 2905–19.10.1016/S1359-6454(03)00105-8 ↗
33. X.J. Pang, D.J. Dwyer, M. Gao, P. Valerio and R.P. Wei: Scripta Metall. Mater., 1994, vol. 31, pp. 345–50.10.1016/0956-716X(94)90294-1 ↗
34. D.J. Dwyer, X.J. Pang, M. Gao and R.P. Wei: Appl Surf Sci, 1994, vol. 81, pp. 229–35.10.1016/0169-4332(94)00152-9 ↗
35. T.P. Gabb and K.O. Connor: Report NASA/TM-2001-210901, NASA, Glenn Research Center, Cleveland, 2001. http://gltrs.grc.nasa.gov.
36. K.R. Bain, M.L. Gambone, J.M. Hyzak and M.C. Thomas: Superalloys 1988, D.N. Duhl, G. Maurer, S. Antolovich, C. Lund and S. Reichman eds, TMS, Champion, 1988. pp. 13–22.10.7449/1988/Superalloys_1988_13_22 ↗