journal article·2016-08

Probing Formability Improvement of Ultra-thin Ferritic Stainless Steel Bipolar Plate of PEMFC in Non-conventional Forming Process

Hyuk Jong Bong, Frédéric Barlat, Myoung-Gyu Lee

Publisher page

Abstract

Formability increase in non-conventional forming profiles programmed in the servo-press was investigated using finite element analysis. As an application, forming experiment on a 0.15-mm-thick ferritic stainless steel sheet for a bipolar plate, a primary component of a proton exchange membrane fuel cell, was conducted. Four different forming profiles were considered to investigate the effects of forming profiles on formability and shape accuracy. The four motions included conventional V motion, holding motion, W motion, and oscillating motion. Among the four motions, the holding motion, in which the slide was held for a certain period at the bottom dead point, led to the best formability. Finite element simulations were conducted to validate the experimental results and to probe the formability improvement in the non-conventional forming profiles. A creep model to address stress relaxation effect along with tool elastic recovery was implemented using a user-material subroutine, CREEP in ABAQUS finite element software. The stress relaxation and variable contact conditions during the holding and oscillating profiles were found to be the main mechanism of formability improvement.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Metal and Thin Film Mechanics · Mechanical stress and fatigue analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. N. D. Heras, E. Roberts, R. Langton, and D. R. Hodgson, Energy Environ. Sci., 2009, vol. 2, pp. 206-14.10.1039/B813231N ↗
2. 2. A. Hermann, T. Chaudhuri, and P. Spagnol, Int. J. Hydrogen Energy, 2005, vol. 30, pp. 1297-1302.10.1016/j.ijhydene.2005.04.016 ↗
3. 3. H. J. Bong, F. Barlat, M.-G. Lee, and D. C. Ahn, Int. J. Mech. Sci., 2012, vol. 64, pp. 1-10.10.1016/j.ijmecsci.2012.08.009 ↗
4. 4. R. Matsumoto, K. Hayashi, and H. Utsunomiya, J. Mater. Process. Technol., 2014, vol. 214, pp. 936-44.10.1016/j.jmatprotec.2013.11.017 ↗
5. 5. T. Maeno, K. Osakada, and K. Mori, Int. J. Mach. Tools Manuf., 2011, vol. 51, pp. 612-17.10.1016/j.ijmachtools.2011.03.007 ↗
6. 6. T. Maeno, K. Mori, and A. Hori, J. Mater. Process. Technol., 2014, vol. 214, pp. 1379-87.10.1016/j.jmatprotec.2014.01.018 ↗
7. 7. T. Nakano, Steel Res. Int., 2010, vol. 81, pp. 682-85.
8. N. Hagino, J. Endo, S. Kato, S. Okudera, M. Maruyam, and M. Kubota, in Proc. 9th Int. Conf. Technol. Plast., 2008, pp. 974–79.
9. 9. Y. Tamai, Y. Yamasaki, A. Yohitake, and T. Imura, Steel Res. Int., 2010, vol. 81, pp. 646-49.
10. 10. N. Koga, M. Asaka, and K. Junlapen, Keikinzoku/Journal Japan Inst. Light Met., 2007, vol. 57, pp. 240-44.10.2464/jilm.57.240 ↗
11. 11. K. Mori, K. Akita, and Y. Abe, Int. J. Mach. Tools Manuf., 2007, vol. 47, pp. 321-25.10.1016/j.ijmachtools.2006.03.013 ↗
12. O. Majidi, F. Barlat, and M.-G. Lee: Int. J. Mater. Form., in press.
13. 13. Z. Qian, S. Chumbley, T. Karakulak, and E. Johnson, Metall. Mater. Trans. A, 2013, vol. 44, pp. 3147-56.10.1007/s11661-013-1688-9 ↗
14. 14. M. Segersäll, J. J. Moverare, D. Leidermark, and K. Simonsson, Metall. Mater. Trans. A, 2014, vol. 45, pp. 2532-44.10.1007/s11661-014-2198-0 ↗
15. 15. L. A. Godlewski, X. Su, T. M. Pollock, and J. E. Allison, Metall. Mater. Trans. A, 2013, vol. 44, pp. 4809-18.10.1007/s11661-013-1800-1 ↗
16. 16. Y. J. Oh, J. H. Hong, and S. W. Nam, Metall. Mater. Trans. A, 2000, vol. 31, pp. 1761-75.10.1007/s11661-998-0327-3 ↗
17. 17. M. J. Anciaux, Metall. Trans. A, 1981, vol. 12, pp. 1981-85.10.1007/BF02643812 ↗
18. 18. M. S. Mohebbi, A. Akbarzadeh, B. H. Kim, and S.-K. Kim, Metall. Mater. Trans. A, 2014, vol. 45, pp. 5442-50.10.1007/s11661-014-2534-4 ↗
19. 19. Y. Tomota, P. Lukáš, D. Neov, S. Harjo, and Y. R. Abe, Acta Mater., 2003, vol. 51, pp. 805-17.10.1016/S1359-6454(02)00472-X ↗
20. 20. K. Hariharan, O. Majidi, C. Kim, M. G. Lee, and F. Barlat, Mater. Des., 2013, vol. 52, pp. 284-88.10.1016/j.matdes.2013.05.088 ↗
21. 21. H. Yamashita, H. Takahiro, and T. Higaki, Honda R&D technical review, 2012, vol. 24, pp.142-48.
22. 22. H.-T. Lee, W. P. Rehbach, F.-C. Hsu, T.-Y. Tai, and E. Hsu, J. Mater. Process. Technol., 2004, vol. 149, pp. 88-93.10.1016/j.jmatprotec.2003.10.056 ↗
23. 23. I. Gupta and J. C. M. Li, Metall. Trans., 1970, vol. 1, pp. 2323-30.10.1007/BF02643451 ↗
24. 24. L. Xiao and J.. Bai, Mater. Sci. Eng. A, 1998, vol. 244, pp. 250-56.10.1016/S0921-5093(97)00688-6 ↗
25. 25. P. Rodriguez, J. Mater. Sci., 1968, vol. 3, pp. 98-101.10.1007/BF00550895 ↗