The Determining Role of Finish Cooling Temperature on the Microstructural Evolution and Precipitation Behavior in an Nb-V-Ti Microalloyed Steel in the Context of Newly Developed Ultrafast Cooling
Source abstract
Abstract
We have studied here the impact of finish cooling temperature on the microstructural evolution and precipitation behavior in Nb-V-Ti microalloyed steel through thermo-mechanical simulation in the context of newly developed ultrafast cooling system. The microstructural evolution was studied in terms of morphology and crystallography of precipitates using high-resolution transmission electron microscopy. At finish cooling temperature of 933 K and 893 K (660 °C and 620 °C), the microstructure primarily consisted of polygonal ferrite, together with a small amount of wedge-shaped acicular ferrite and lamellar pearlite, while, at 853 K and 813 K (580 °C and 540 °C), the microstructure consisted of lath bainite with fine interlath cementite and granular bainite with martensite/austenite (M/A) constituent. In all the finish cooling temperatures studied, the near-spherical precipitates of size range ~2 to 15 nm were randomly dispersed in ferrite and bainite matrix. The carbide precipitates were identified as (Nb,V)C with NaCl-type crystal structure. With a decrease in the finish cooling temperature, the size of the precipitates was decreased, while the number density first increased with a peak at 893 K (620 °C) and then decreased. Using Ashby–Orowan model, the contribution of the precipitation strengthening to yield strength was ~149 MPa at the finish cooling temperature of 893 K (620 °C).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. 1. K. Nishioka and K. Ichikawa: Science and Technology of Advanced Materials, 2012, vol. 13, pp. 1-20.
2. 2. Y. Funakawa, T. Shiozaki, K. Tomita, T. Yamamoto and E. Maeda: ISIJ Int., 2004, vol. 44, pp. 1945-51.10.2355/isijinternational.44.1945 ↗
3. 3. C. Y. Chen, H. W. Yen, F. H. Kao, W. C. Li, C. Y. Huang, J. R. Yang and S. H. Wang: Mater. Sci. Eng. A, 2009, vol. 499, pp. 162-66.10.1016/j.msea.2007.11.110 ↗
4. R. D. K. Misra, S. Nayak, P. K. C. Venkatasurya, V. Ramuni, M. C. Somani and L. P. Karjalainen: Metallurgical and Materials Transactions, 2010, vol. 41A, pp. 2162-74.10.1007/s11661-010-0230-6 ↗
5. B. Wang, Z. D. Wang, B. X. Wang, G. D. Wang and R. D. K. Misra: Metall. Mater. Trans. A, 2015, vol. 46, pp. 2834-43.10.1007/s11661-015-2933-1 ↗
6. Z. Jia, R. D. K. Misra, R. O’malley and S. J. Jansto: Materials Science and Engineering: A, 2011, vol. 528A, pp. 7077-83.10.1016/j.msea.2011.05.073 ↗
7. L. Aurélie, S. Pierre, B. Guillaume, H. Jean-Claude, R. Philippe, N. Joerii and H. Philippe: Metallurgical aspects of Ultra Fast Cooling in front of the down-coiler. Stahleisen, Düsseldorf, ALLEMAGNE, 2004.
8. H. J. Li, Z. L. Li, Y. Guo, Z. D. Wang and G. D. Wang: Journal of Iron and Steel Research, International, 2013, vol. 20, pp. 29-34.10.1016/S1006-706X(13)60122-3 ↗
9. T. L. Fu, Z. D. Wang, Y. Li, J. D. Li and G. D. Wang: Appl. Therm. Eng., 2014, vol. 70, pp. 800-07.10.1016/j.applthermaleng.2014.05.083 ↗
10. G. D. Wang, X. H. Liu, L. G. Sun, L. Zhe, and D. L. Liu: Iron Steel, 2008, vol. 43, pp. 49–52.
11. G.D. Wang: Shanghai metals, 2008, vol. 30, pp. 1–4.
12. B. Wang, Z.Y. Liu, X.G. Zhou, G.D. Wang, and R.D.K. Misra: Materials Science and Engineering: A, 2013, vol. 575, pp. 189-98.10.1016/j.msea.2013.02.071 ↗
13. J. Chen, S. Tang, Z. Liu, G. Wang and Y. Zhou: J. Mater. Sci., 2012, vol. 47, pp. 4640-48.10.1007/s10853-012-6330-5 ↗
14. J. Chen, M. Y. Lv, S. Tang, Z. Y. Liu and G. D. Wang: Materials Science and Engineering: A, 2014, vol. 594, pp. 389-93.10.1016/j.msea.2013.09.086 ↗
15. J. Hu, L. X. Du and J. J. Wang: Materials Science and Engineering: A, 2012, vol. 554, pp. 79-85.10.1016/j.msea.2012.06.018 ↗
16. J. Hu, L. X. Du, J. J. Wang and Q. Y. Sun: Mater. Design, 2014, vol. 53, pp. 332-37.10.1016/j.matdes.2013.07.036 ↗
17. J. Chen, S. Tang, Z. Y. Liu and G. D. Wang: Materials Science and Engineering: A, 2013, vol. 559, pp. 241-49.10.1016/j.msea.2012.08.091 ↗
18. J. Chen, S. Tang, Z. Liu and G. Wang: Mater. Design, 2013, vol. 49, pp. 465-70.10.1016/j.matdes.2013.01.017 ↗
19. J. Hu, L. X. Du, J. J. Wang, C. R. Gao, T. Z. Yang, A. Y. Wang and R. D. K. Misra: Metall. Mater. Trans. A, 2013, vol. 44, pp. 4937-47.10.1007/s11661-013-1839-z ↗
20. K.X. Guo, H.Q. Ye, and Y.K. Wu: Application of Electron Diffraction Pattern in Crystallography. Science, Beijing, 1983.
21. X.Y. Huang: The microstructure of materials and its electron microscopy analysis. Metallurgical Industry, Beijing, 2008.
22. C. Y. Chen, C. C. Chen and J. R. Yang: Mater. Charact., 2014, vol. 88, pp. 69-79.10.1016/j.matchar.2013.11.016 ↗
23. N. Kamikawa, Y. Abe, G. Miyamoto, Y. Funakawa and T. Furuhara: ISIJ Int., 2014, vol. 54, pp. 212-21.10.2355/isijinternational.54.212 ↗
24. D. B. Park, M. Y. Huh, J. H. Shim, J. Y. Suh, K. H. Lee and W. S. Jung: Materials Science and Engineering: A, 2013, vol. 560, pp. 528-34.10.1016/j.msea.2012.09.098 ↗
25. T. P. Wang, F. H. Kao, S. H. Wang, J. R. Yang, C. Y. Huang and H. R. Chen: Mater. Lett., 2011, vol. 65, pp. 396-99.10.1016/j.matlet.2010.10.022 ↗
26. H. W. Yen, C. Y. Chen, T. Y. Wang, C. Y. Huang and J. R. Yang: Mater. Sci. Technol., 2010, vol. 26, pp. 421-30.10.1179/026708309X12512744154207 ↗
27. R. Okamoto, A. Borgenstam and J. Ågren: Acta Mater., 2010, vol. 58, pp. 4783-90.10.1016/j.actamat.2010.05.014 ↗
28. H. W. Yen, P. Y. Chen, C. Y. Huang and J. R. Yang: Acta Mater., 2011, vol. 59, pp. 6264-74.10.1016/j.actamat.2011.06.037 ↗
29. J. B. Wiskel, D. G. Ivey and H. Henein: Metall. Mater. Trans. B, 2007, vol. 39, pp. 116-24.
30. S. Mukherjee, I. B. Timokhina, C. Zhu, S. P. Ringer and P. D. Hodgson: Acta Mater., 2013, vol. 61, pp. 2521-30.10.1016/j.actamat.2013.01.028 ↗
31. I. B. Timokhina, P. D. Hodgson, S. P. Ringer, R. K. Zheng and E. V. Pereloma: Scripta Mater., 2007, vol. 56, pp. 601-04.10.1016/j.scriptamat.2006.12.018 ↗
32. H. J. Kestenbach and J. Gallego: Scripta Mater., 2001, vol. 44, pp. 791-96.10.1016/S1359-6462(00)00660-6 ↗
33. Y. Xu, W. Zhang, M. Sun, H. Yi and Z. Liu: Mater. Lett., 2015, vol. 139, pp. 177-81.10.1016/j.matlet.2014.07.135 ↗
34. K. L. Johnson: Contact mechanics. Cambridge University Press, Cambridge, UK, 1985.10.1017/CBO9781139171731 ↗
35. W. C. Oliver and G. M. Pharr: J. Mater. Res., 1992, vol. 7, pp. 1654-59.10.1557/JMR.1992.1564 ↗
36. T. Gladman: The Physical Metallurgy of Microalloyed Steels, The Institute of Materials, London, 1997.