Effects of Annealing Treatment Prior to Cold Rolling on Delayed Fracture Properties in Ferrite-Austenite Duplex Lightweight Steels
Source abstract
Abstract
Tensile properties of recently developed automotive high-strength steels containing about 10 wt pct of Mn and Al are superior to other conventional steels, but the active commercialization has been postponed because they are often subjected to cracking during formation or to the delayed fracture after formation. Here, the delayed fracture behavior of a ferrite-austenite duplex lightweight steel whose microstructure was modified by a batch annealing treatment at 1023 K (750 °C) prior to cold rolling was examined by HCl immersion tests of cup specimens, and was compared with that of an unmodified steel. After the batch annealing, band structures were almost decomposed as strong textures of {100}〈011〉 α-fibers and {111}〈112〉 γ-fibers were considerably dissolved, while ferrite grains were refined. The steel cup specimen having this modified microstructure was not cracked when immersed in an HCl solution for 18 days, whereas the specimen having unmodified microstructure underwent the delayed fracture within 1 day. This time delayed fracture was more critically affected by difference in deformation characteristics such as martensitic transformation and deformation inhomogeneity induced from concentration of residual stress or plastic strain, rather than the difference in initial microstructures. The present work gives a promise for automotive applications requiring excellent mechanical and delayed fracture properties as well as reduced specific weight.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. P.J. Jacques: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 259-65.10.1016/j.cossms.2004.09.006 ↗
2. S. Zaefferer, J. Ohlert, and W. Bleck: Acta Mater., 2004, vol. 52, pp. 2765-78.10.1016/j.actamat.2004.02.044 ↗
3. J. Bouquerel, K. Verbeken, and B.C. De Cooman: Acta Mater., 2006, vol. 54, pp. 1443-56.10.1016/j.actamat.2005.10.059 ↗
4. D. Raabe, D. Ponge, O. Dmitrieva, and B. Sander: Scr. Mater., 2009, vol. 60, pp. 1141-44.10.1016/j.scriptamat.2009.02.062 ↗
5. G. Frommeyer and U. Brüx: Steel Res. Int., 2006, vol. 77, pp. 627-33.10.1002/srin.200606440 ↗
6. R. Rana, C. Liu, and R.K. Ray: Scr. Mater., 2013, vol. 68, pp. 354-59.10.1016/j.scriptamat.2012.10.004 ↗
7. S.W. Hwang, J.H. Ji, E.G. Lee, and K.T. Park: Mater. Sci. Eng. A, 2011, vol. 528, pp. 5196-5203.10.1016/j.msea.2011.03.045 ↗
8. B.-H. Song, J. Kim, S. Jeong, I. Choi, and Y.-K. Lee: Korean J. Met. Mater., 2014, vol. 52, pp. 1-9.10.3365/KJMM.2014.52.1.001 ↗
9. H. Kim, D.-W. Suh, and N.J. Kim: Sci. Technol. Adv. Mater., 2013, vol. 14, pp. 1-11.10.1088/1468-6996/14/1/014205 ↗
10. D.-W. Suh, S.-J. Park, T.-H. Lee, C.-S. Oh, and S.-J. Kim: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 397-408.10.1007/s11661-009-0124-7 ↗
11. H. Huang, D. Gan, and P.W. Kao: Scr. Metall. Mater., 1994, vol. 30, pp. 499-504.10.1016/0956-716X(94)90610-6 ↗
12. W.K. Choo, J.H. Kim, and J.C. Yoon: Acta Mater., 1997, vol. 45, pp. 4877-85.10.1016/S1359-6454(97)00201-2 ↗
13. C.L. Lin, C.G. Chao, H.Y. Bor, and T.F. Liu: Mater. Trans., 2010, vol. 51, pp. 1084-88.10.2320/matertrans.M2010013 ↗
14. B.C. De Cooman, L. Chen, H.S. Kim, Y. Estrin, S.K. Kim, and H. Voswinckel: Microstructure and Texture in Steels, 1st ed., p. 165, Springer, New York, 2009.10.1007/978-1-84882-454-6_10 ↗
15. K.-G. Chin, C.-Y. Kang, S.Y. Shin, S. Hong, S. Lee, H.S. Kim, K.-H. Kim, and N.J. Kim: Mater. Sci. Eng. A, 2011, vol. 528, pp. 2922-28.10.1016/j.msea.2010.12.085 ↗
16. O. Grässel, L. Krüger, G. Frommeyer, and L.W. Meyer: Int. J. Plast., 2000, vol. 16, pp. 1391-1409.10.1016/S0749-6419(00)00015-2 ↗
17. O. Bouaziz and N. Guelton: Mater. Sci. Eng. A, 2001, vol. 319, pp. 246-49.10.1016/S0921-5093(00)02019-0 ↗
18. M. Koyama, T. Sawaguchi, K. Ogawa, T. Kikuchi, and M. Murakami: Mater. Sci. Eng. A, 2008, vol. 497, pp. 353-57.10.1016/j.msea.2008.07.026 ↗
19. Y. Lou, S.J. Lim, and H. Huh: Met. Mater. Int., 2013, vol. 19, pp. 697-705.10.1007/s12540-013-4009-3 ↗
20. J.S. Kim, Y.H. Lee, D.L. Lee, K.T. Park, and C.S. Lee: Mater. Sci. Eng. A, 2009, vol. 505, pp. 105-10.10.1016/j.msea.2008.11.040 ↗
21. M. Wang, E. Akiyama, and K. Tsuzaki: Scr. Mater., 2005, vol. 52, pp. 403-08.10.1016/j.scriptamat.2004.10.023 ↗
22. J.E. Jin and Y.K. Lee: Acta Mater., 2012, vol. 60, pp. 1680-88.10.1016/j.actamat.2011.12.004 ↗
23. J. Kim, S.-J. Lee, and B.C. De Cooman: Scr. Mater., 2011, vol. 65, pp. 363-66.10.1016/j.scriptamat.2011.05.014 ↗
24. M.R. Berrahmoune, S. Berveiller, K. Inal, and E. Patoor: Mater. Sci. Eng. A, 2006, vol. 438-440, pp. 262-66.10.1016/j.msea.2006.02.189 ↗
25. R.A. McCoy: in International Conference on the Effects of Hydrogen on Materials Properties and Selection and Structural Design, I.M. Bernstein, A.W. Thompson, eds., ASM, 1973, pp. 169–78.
26. B. Kim, T.T.T. Trang, and N.J. Kim: Met. Mater. Int., 2014, vol. 20, pp. 35-39.10.1007/s12540-014-1009-x ↗
27. J. Toribio and M. Elices: Int. J. Solids Structures, 1991, vol. 28, pp. 791-803.10.1016/0020-7683(91)90157-B ↗
28. ASTM E517-00: Standard Test Method for Plastic Strain Ratio r for Sheet Metal, Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA, 2000, vol. 03.01, pp. 1–8.
29. M. Wang, E. Akiyama, and K. Tsuzaki: Mater. Sci. Eng. A, 2005, vol. 398, pp. 37-46.10.1016/j.msea.2005.03.008 ↗
30. S. Takagi, Y. Toji, M. Yoshino, and K. Hasegawa: ISIJ Int., 2012, vol. 52, pp. 316-22.10.2355/isijinternational.52.316 ↗
31. Y.S. Chun, K.-T. Park, and C.S. Lee: Scr. Mater., 2012, vol. 66, pp. 960-65.10.1016/j.scriptamat.2012.02.038 ↗
32. S.S. Sohn, B.-J. Lee, J.-H. Kwak, and S. Lee: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 3844-56.10.1007/s11661-014-2332-z ↗
33. S.S. Sohn, B.-J. Lee, S. Lee, N.J. Kim, and J.-H. Kwak: Acta Mater., 2013, vol. 61, pp. 5050-66.10.1016/j.actamat.2013.04.038 ↗
34. A. Zargaran, H.S. Kim, J.-H. Kwak, and N.J. Kim: Scr. Mater., 2014, vol. 89, pp. 37-40.10.1016/j.scriptamat.2014.06.018 ↗
35. J. Ćwiek: J. Achi. Mater. Manu. Eng., 2009, vol. 37, pp. 193-212.
36. J.P. Hirth: Metall. Trans. A, 1980, vol. 11, pp. 861-90.10.1007/BF02654700 ↗
37. I.-J. Park, S. Lee, H. Jeon, and Y.-K. Lee: Corros. Sci., 2014, vol. 93, pp. 63-69.10.1016/j.corsci.2015.01.012 ↗
38. G.M. Pressouyre and I.M. Bernstein: Metall. Trans. A, 1978, vol. 9A, pp. 1571-80.10.1007/BF02661939 ↗
39. D. Raabe, Y. Wang, and F. Roters: Comput. Mater. Sci., 2005, vol. 34, pp. 221-34.10.1016/j.commatsci.2004.12.072 ↗
40. R.K. Saxena and P.M. Dixit: Int. J. Adv. Manuf. Technol., 2009, vol. 45, pp. 219-33.10.1007/s00170-009-1963-5 ↗
41. S.K. Singh, K. Mahesh, A. Kumar, and M. Swathi: Mater. Des., 2010, vol. 31, pp. 4478-84.10.1016/j.matdes.2010.04.049 ↗
42. R. Hill: J. Mech. Phys. Solids, 1958, vol. 6, pp. 236-49.10.1016/0022-5096(58)90029-2 ↗
43. Dassault Systemes, ABAQUS Online Documentation: Abaqus Analysis User’s Manual, 2012.
44. I.N. Vladimirov, M.P. Pietryga, and S. Reese: Int. J. Plast., 2010, vol. 26, pp. 659-87.10.1016/j.ijplas.2009.09.008 ↗
45. E. Jimenez-Melero, N.H. van Dijk, L. Zhao, J. Sietsma, S.E. Offerman, J.P. Wright, and S. van der Zwaag: Scr. Mater., 2007, vol. 56, pp. 421-24.10.1016/j.scriptamat.2006.10.041 ↗
46. C.-H. Seo, K.H. Kwon, K. Choi, K.-H. Kim, J.H. Kwak, S. Lee, and N.J. Kim: Scr. Mater., 2012, vol. 66, pp. 519-22.10.1016/j.scriptamat.2011.12.026 ↗
47. L. Remy and A. Pineau: Mater. Sci. Eng., 1977, vol. A28, pp. 99-107.10.1016/0025-5416(77)90093-3 ↗
48. J. Mahieu, J. Maki, B.C. De Cooman, and S. Claessens: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2573-80.10.1007/s11661-002-0378-9 ↗
49. J.-S. Kim, J.B. Jeon, J.E. Jung, K.-K. Um, and Y.W. Chang: Met. Mater. Int., 2014, vol. 20, pp. 41-47.10.1007/s12540-014-1010-4 ↗
50. J.A. Ronevich, B.C. De Cooman, J.G. Speer, E. De Moor, and D.K. Matlock: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 2293-2301.10.1007/s11661-011-1075-3 ↗