journal article·2015-12

Effect of Cooling Rate on Phase Transformations in a High-Strength Low-Alloy Steel Studied from the Liquid Phase

Thomas Dorin, Nicole Stanford, Adam Taylor, Peter Hodgson

Publisher page

Abstract

The phase transformation and precipitation in a high-strength low-alloy steel have been studied over a large range of cooling rates, and a continuous cooling transformation (CCT) diagram has been produced. These experiments are unique because the measurements were made from samples cooled directly from the melt, rather than in homogenized and re-heated billets. The purpose of this experimental design was to examine conditions pertinent to direct strip casting. At the highest cooling rates which simulate strip casting, the microstructure was fully bainitic with small regions of pearlite. At lower cooling rates, the fraction of polygonal ferrite increased and the pearlite regions became larger. The CCT diagram and the microstructural analysis showed that the precipitation of NbC is suppressed at high cooling rates, and is likely to be incomplete at intermediate cooling rates.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Kopp, R. (1996). J. of Mat. Proc. Tech., 60, 1-9.10.1016/0924-0136(96)02301-1 ↗
2. Zapuskalov, N. (2003). ISIJ International, 43, 1115-1127.10.2355/isijinternational.43.1115 ↗
3. Strezov, L., Herbertson, J., & Belton, G. (2000). Metall. Mat. Trans. B, 31B, 1023-1030.10.1007/s11663-000-0078-z ↗
4. Ferry, M. (2006). Direct strip casting of metals and alloys. Woodhead, Cambridge.10.1533/9781845691660 ↗
5. Shiang, L., & Wray, P. (1989). Met. Trans. A, 20A, 1191-1198.10.1007/BF02647400 ↗
6. Malekjani, S., Timokhina, I., Wang, J., & Hodgson, P. (2013). Mat. Sci. & Eng. A, 581, 39-47.10.1016/j.msea.2013.05.070 ↗
7. Charleux, M., Poole, W., Militzer, M., & Deschamps, A. (2001). Met. and Mat. Trans. A, 32A, 1635-1647.10.1007/s11661-001-0142-6 ↗
8. Zhang, Z., & Farrar, R. (1995). Atlas of continuous cooling transformation (CCT) diagrams applicable to low carbon low alloy weld metals. Woodhead, Cambridge.
9. Strezov, L., & Herbertson, J. (1998). ISIJ int., 38, 959-966.10.2355/isijinternational.38.959 ↗
10. Gault, B., Moody, M., Cairney, J., & Ringer, S. (2012). Atom Probe Microscopy. New York: Springer.10.1007/978-1-4614-3436-8 ↗
11. Miller, M., & Forbes, R. (2014). Atom-Probe Tomography: The Local Electrode Atom Probe. New York: Springer.10.1007/978-1-4899-7430-3 ↗
12. Avrami, M. (1939). The J. of Chem. Phys., 7 (12), 1103-1112.10.1063/1.1750380 ↗
13. Shrestha, S., Xie, K., Zhu, C., Ringer, S., Killmore, C., Carpenter, K., et al. (2013). Mat. Sci. & Eng. A, 568, 88-95.10.1016/j.msea.2013.01.021 ↗
14. Lee, Y. (2002). J. of Mat. Sci. Letters, 21, 1253-1255.10.1023/A:1016555119230 ↗
15. Andrews, K. (1965). J. Iron Steel Inst., 203, 721-727.
16. Dutta, B., & Sellars, C. (1987). Mat. Sci. and Tech., 3, 197-207.10.1179/mst.1987.3.3.197 ↗
17. Perrard, F., Deschamps, A., Bley, F., Donnadieu, P., & Maugis, P. (2006). J. of Applied Crystallo., 39, 473-482.10.1107/S002188980601301X ↗
18. Evans, T., & Strezov, L. (2000). Metall. Mat. Trans. B, 31, 1081-1089.10.1007/s11663-000-0083-2 ↗
19. Suehiro, M., Liu, Z., & Agren, J. (1996). Acta Mater., 44 (10), 4241-4251.10.1016/S1359-6454(96)00036-5 ↗
20. Challa, V., Zhou, W., Misra, R., O’Malley, R., & Janto, S. (2014). Mat. Sci & Eng. A, 595, 143-153.10.1016/j.msea.2013.12.002 ↗
21. P. Yan and H. Bhadeshia: Mater. Sci. Technol., 2014