Al-TiC Composites Fabricated by a Thermally Activated Reaction Process in an Al Melt Using Al-Ti-C-CuO Powder Mixtures. Part I: Microstructural Evolution and Reaction Mechanism
Source abstract
Abstract
Al matrix composites reinforced with TiC particles are fabricated by a thermally activated reaction of Al-Ti-C powder mixtures in an Al melt. In the presence of CuO, reactant mixtures in the form of a pellet added to molten Al at temperatures higher than 1093 K (820 °C) instantly reach the peak temperature over 1785 K (1512 °C), followed by combustion wave propagation with in situ synthesizing TiC with a size of approximately 1 μm. Incomplete reaction products such as unreacted C, Al3Ti, and TiC aggregates are also observed. The pellet microstructure evolution upon the combustion reaction indicates that preheating temperature, i.e., the initial melt temperature, affects both the thermodynamic and kinetic characteristics of the reaction, and thereby influences the final microstructure of the Al/TiC composites. Based on the experimental and theoretical results, a sequence of the reaction leading upto the in situ synthesis of TiC is illustrated and the corresponding mechanism for the present process is proposed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Intermetallics and Advanced Alloy Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. X.C. Tong and H.S. Fang, Metall. Mater. Trans. A 1998, vol. 29A, pp. 893-902.10.1007/s11661-998-0279-7 ↗
2. P. Sahoo and M.J. Koczak, Mater. Sci. Eng., A 1991, vol. A131, pp. 69-76.10.1016/0921-5093(91)90345-N ↗
3. I. Gotman, M.J. Koczak and E. Shtessel, Mater. Sci. Eng., A 1994, vol. A187, pp. 189-199.10.1016/0921-5093(94)90347-6 ↗
4. H. Nakata, T. Choh and N. Kanetake, J. Mater. Sci. 1995, vol. 30, pp. 1719-27.10.1007/BF00351601 ↗
5. Y.F. Liang, J.E. Zhou and S.Q. Dong, Mater. Sci. Eng., A 2010, vol. 527, pp. 7955-60.10.1016/j.msea.2010.08.098 ↗
6. X.C. Tong and A.K. Chosh, J. Mater. Sci. 2001, vol. 36, pp. 4059-69.10.1023/A:1017946927566 ↗
7. Tetsuya Nukami and Merton C. Flemings, Metall. Mater. Trans. A 1995, vol. 26A, pp. 1877-84.10.1007/BF02670775 ↗
8. M.K. Premkumar and M.G. Chu, Mater. Sci. Eng., A 1995, vol. A202, pp. 172-18.10.1016/0921-5093(95)09787-2 ↗
9. X.C. Tong, J. Mater. Sci. 1998, vol. 33, pp. 5365-74.10.1023/A:1004494116119 ↗
10. A.E.W. Jarfors, L. Svendsen, M. Wallinder and H. Fredriksson, Metall. Trans. A 1993, vol. 24A, pp. 2577-83.10.1007/BF02646536 ↗
11. Bin Yang, Guoxiang Chen and Jishan Zhang, Mater. Des. 2001, vol. 22, pp. 645-50.10.1016/S0261-3069(01)00029-2 ↗
12. A.G. Merzhanov, J. Mater. Process. Technol. 1996, vol. 56, pp. 222-41.10.1016/0924-0136(95)01837-9 ↗
13. P. Li, E.G. Kandalova, V.I. Nikitin, A.G. Makarenko, A.R. Luts and Y. Zhang, Scripta Mater. 2003, vol. 49, pp. 699-703.10.1016/S1359-6462(03)00402-0 ↗
14. P. Li, E.G. Kandalova and V.I. Nikitin, Mater. Lett. 2005, vol. 59, pp. 2545-48.10.1016/j.matlet.2005.03.043 ↗
15. G.S. Vinod Kumar, B.S. Murty and M. Chakraborty, J. Alloys Compd. 2005, vol. 396, pp. 143-50.10.1016/j.jallcom.2004.12.039 ↗
16. Ranjit Bauri, Transactions of The Indian Institute of Metals 2009, vol. 62, pp. 391-95.10.1007/s12666-009-0068-z ↗
17. Y. Birol, J. Alloys Compd. 2008, vol. 454, pp. 110-17.10.1016/j.jallcom.2006.12.016 ↗
18. V.H. López and A.R. Kennedy, J. Colloid Interface Sci. 2006, vol. 298, pp. 356-62.10.1016/j.jcis.2005.12.040 ↗
19. Y. Mazaheri, M. Meratian, R. Emadi and A.R. Najarian, Mater. Sci. Eng., A 2013, vol. 560, pp. 278-87.10.1016/j.msea.2012.09.068 ↗
20. Young-Hee Cho, Jung-Moo Lee, Hwa-Jung Kim, Jong-Jin Kim and Su-Hyeon Kim, Met. Mater. Int. 2012, vol. 19, pp. 1109-16.10.1007/s12540-013-5028-9 ↗
21. Y.-H. Cho, J.-M. Lee, H.-J. Kim, J.-J. Kim, and S.-H. Kim: Proc 13th Int Conf Alum Alloys, 2012. pp. 201–06.10.1002/9781118495292.ch31 ↗
22. Wei-Chang Lee and Shyan-Lung Chung, J. Am. Ceram. Soc. 1997, vol. 80, pp. 53-61.10.1111/j.1151-2916.1997.tb02790.x ↗
23. Guoqing Xiao, Quncheng Fan, Meizhuan Gu and Zhihao Jin, Mater. Sci. Eng., A 2006, vol. 425, pp. 318-25.10.1016/j.msea.2006.03.076 ↗
24. X.C. Tong and H.S. Fang, Metall. Mater. Trans. A 1998, vol. 29A, pp. 875-91.10.1007/s11661-998-0278-8 ↗
25. Erlin Zhang, Songyan Zeng, Bo Yang, Qingchun Li and Mingzhen Ma, Metall. Mater. Trans. A 1999, vol. 30A, pp. 1147-51.10.1007/s11661-999-0166-x ↗
26. A.R. Kennedy, D.P. Weston, M.I. Jones and C. Enel, Scripta Mater. 2000, vol. 42, pp. 1187-92.10.1016/S1359-6462(00)00356-0 ↗
27. Haimin Ding, Xiangfa Liu, Lina Yu and Guoqun Zhao, Scripta Mater. 2007, vol. 57, pp. 575-78.10.1016/j.scriptamat.2007.06.028 ↗
28. Yoon Choi and Shi-Woo Rhee, J. Am. Ceram. Soc. 1995, vol. 78, pp. 986-92.10.1111/j.1151-2916.1995.tb08426.x ↗
29. Z. Wang, X. Liu, J. Zhang and X. Bian, J. Mater. Sci. Lett. 2003, vol. 22, pp. 1427-29.10.1023/A:1025763430829 ↗
30. A. Contreras, C.A. Leon, R.A.L. Drew and E. Bedolla, Scripta Mater. 2003, vol. 48, pp. 1625-30.10.1016/S1359-6462(03)00137-4 ↗
31. Jingjing Zhang, Jung-Moo Lee, Young-Hee Cho, Su-Hyeon Kim and Huashun Yu, Scripta Mater. 2013, vol. 69, pp. 45-48.10.1016/j.scriptamat.2013.03.012 ↗
32. M.S. Song, B. Huang, M.X. Zhang and J.G. Li, Int. J. Refract. Met. Hard Mater. 2009, vol. 27, pp. 584-89.10.1016/j.ijrmhm.2008.09.009 ↗
33. Robert A. Rapp and Xuejin Zheng, Metall. Trans. A 1991, vol. 22A, pp. 3071-75.10.1007/BF02650269 ↗
34. Abinash Banerji and Winfried Reif, Metall. Trans. A 1986, vol. 17A, pp. 2127-37.10.1007/BF02645911 ↗
35. M.E. Fine and J.G. Conley, Metall. Trans. A 1990, vol. 21A, pp. 2609-10.10.1007/BF02647010 ↗
36. Atsushi Hibino and Ryuzo Watanabe, Journal of Japan Institute of Metals 1991, vol. 55, pp. 1256-62.10.2320/jinstmet1952.55.11_1256 ↗
37. Toshino Matsubara, Keisuke Uenishi and Kojiro F. Kobayashi, Mater. Trans., JIM 2000, vol. 41, pp. 631-34.10.2320/matertrans1989.41.631 ↗
38. Jung-Moo Lee, Suk-Bong Kang, Tatsuo Sato, Hiroyasu Tezuka and Akihiko Kamio, Mater. Sci. Eng., A 2003, vol. A343, pp. 199-209.10.1016/S0921-5093(02)00380-5 ↗
39. A.M. Kanury, Metall. Trans. A 1992, vol. 23A, pp. 2349-56.10.1007/BF02658036 ↗
40. Erlin Zhang, Songyan Zeng, Bo Yang, Qingchun Li and Mingzhen Ma, Metall. Mater. Trans. A 1999, vol. 30A, pp. 1153-57.10.1007/s11661-999-0167-9 ↗