The Effect of Concurrent Straining on Phase Transformations in NiAl Bronze During the Friction Stir Processing Thermomechanical Cycle
Source abstract
Abstract
Equivalent strains up to a value of ≈2.7 were determined by evaluation of the shape changes of the phases in a duplex α(fcc)/β(bcc) microstructure formed ahead of the pin tool extraction site during the friction stir processing (FSP) thermomechanical cycle in a cast NiAl bronze alloy. Correlation of the local strains with volume fractions of the various microstructure constituents in this alloy shows that the concurrent straining of FSP results in acceleration of the α + β → β reaction in the thermomechanically affected zone (TMAZ) ahead of the pin extraction site. The resulting volume fraction of β (as determined by the volume fraction of its transformation products formed during post-FSP cooling) corresponds closely to the volume fraction expected for the peak stir zone temperature measured separately by means of thermocouples embedded within the tool pin profile along the tool path. The stir zone (SZ) in this material exhibits near-equilibrium microstructures despite brief dwells near the peak temperature (T peak ≈ 0.95T melt), reflecting large local strains and strain rates associated with this process.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Science · Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. W.M. Thomas, E.D. Nicholas, J.C. Needham, M.G. Murch, P. Templesmith, and C.J. Dawes: G.B. Patent Application No. 9125978.8, Dec. 1991
2. U.S. Patent No. 5460317, Oct. 1995.
3. R.S. Mishra, in Friction Stir Welding and Processing, R.S. Mishra and M.W. Mahoney, eds., ASM INTERNATIONAL, Materials Park, OH, 2007, pp. 309–50.
4. R.S. Mishra and Z.Y. Ma: Mater. Sci. Eng. R, 2005, vol. 50, pp. 1–78.10.1016/j.mser.2005.07.001 ↗
5. J.A. Schneider, Friction Stir Welding and Processing, R.S. Mishra and M.W. Mahoney, eds., ASM INTERNATIONAL, Materials Park, OH, 2007, pp. 37–49.
6. S. Swaminathan, K. Oh-Ishi, A.P. Zhilyaev, C.B. Fuller, B. London, M.W. Mahoney, and T.R. McNelley: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 631–40.10.1007/s11661-009-0140-7 ↗
7. D. Rosenthal: Trans. ASME, 1946, vol. 68, pp. 849–66.
8. P. Weill-Couly and D. Arnaud: Fonderie, 1973, no. 322, pp. 123–35.
9. E.A. Culpan and G. Rose: J. Mater. Sci., 1978, vol. 13, pp. 1647–57.10.1007/BF00548728 ↗
10. E.A. Culpan and G. Rose: Br. Corr. J., 1979, vol. 14, p. 160–66.10.1179/bcj.1979.14.3.160 ↗
11. D.M. Lloyd, G.W. Lorimer, and N. Ridley: Met. Technol., 1980, vol. 7, pp. 114–19.10.1179/030716980803286577 ↗
12. P. Brezina: Int. Met. Rev., 1982, vol. 27, pp. 77–120.10.1179/imr.1982.27.1.77 ↗
13. F. Hasan, G.W. Lorimer, and N. Ridley: Proc. Int. Conf. on Solid to Solid Phase Transformations, TMS, Warrendale, PA, 1982, pp. 745–49.
14. F. Hasan, A. Jahanafrooz, G.W. Lorimer, and N. Ridley: Metall. Trans. A, 1982, vol. 13A, pp. 1337–45.10.1007/BF02642870 ↗
15. F. Hasan, G.W. Lorimer, and N. Ridley: J. Phys., 1982, vol. 43, p. C4 653–C4 658.
16. A. Jahanafrooz, F. Hasan, G.W. Lorimer, and N. Ridley: Metall. Trans. A, 1983, vol. 14A, p. 1951–56.10.1007/BF02662362 ↗
17. F. Hasan, G.W. Lorimer, and N. Ridley: Met. Sci., 1983, vol. 17, pp. 289–95.10.1179/030634583790420826 ↗
18. F. Hasan, J. Iqbal, and N. Ridley: Mater. Sci. Technol., 1985, vol. 1, pp. 312–15.10.1179/mst.1985.1.4.312 ↗
19. G.W. Lorimer, F. Hasan, J. Iqbal, and N. Ridley: Br. Corr. J., 1986, vol. 21, pp. 244–48.10.1179/000705986798272046 ↗
20. K. Oh-ishi and T. R. McNelley: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2951–61.10.1007/s11661-004-0242-1 ↗
21. K. Oh-ishi and T. R. McNelley: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1575–85.10.1007/s11661-005-0249-2 ↗
22. K. Oh-Ishi, A.P. Zhilyaev, and T.R. McNelley: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2239–51.10.1007/BF02586143 ↗
23. T.R. McNelley, K. Oh-Ishi, and A.P. Zhilyaev: in Friction Stir Welding and Processing, R.S. Mishra and M.W. Mahoney, eds., ASM INTERNATIONAL, Materials Park, OH, 2007, pp. 155–73.
24. J.L. Robbins, O.C. Shepard, and O.D. Sherby: J. Iron Steel Inst., 1964, vol. 202, pp. 804–07.
25. O.D. Sherby, B. Walser, C.M. Young, and E.M. Cady: Scripta Metall., 1975, vol. 9, pp. 569–73.10.1016/0036-9748(75)90352-X ↗
26. B. Walser and O.D. Sherby: Metall. Trans. A, 1979, vol. 10A, pp. 1461–71.10.1007/BF02812011 ↗
27. A. Askari, S. Silling, B. London, and M.W. Mahoney, in Friction Stir Welding and Processing, K.V. Jata, M.W. Mahoney, R.S. Mishra, S.L. Semiatin, and T. Lienert, eds., TMS, Warrendale, PA, 2001, pp. 43–54.
28. H.R. Shercliff and P.A. Colegrove, in Friction Stir Welding and Processing, R.S. Mishra and M.W. Mahoney, eds., ASM INTERNATIONAL, Materials Park, OH, 2007, pp. 187–217.
29. J.M. García-Infanta, A.P. Zhilyaev, F. Carreño, O.A. Ruano, J.Q. Su, S.K. Menon, and T.R. McNelley: J. Mater. Sci., 2010, vol. 45 (17), pp. 4613–20.10.1007/s10853-010-4530-4 ↗
30. F.J. Humphreys: Acta Metall. Mater., 1977, vol. 25, pp. 1323–44.10.1016/0001-6160(77)90109-2 ↗
31. F.J. Humphreys and P.N. Kalu: Acta Metall. Mater., 1987, vol. 35, pp. 2815–29.10.1016/0001-6160(87)90281-1 ↗
32. R.D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D. Juul-Jensen, M.E. Kassner, W.E. King, T.R. McNelley, H.J. McQueen, and A.D. Rollett: Mater. Sci. Eng. A, 1997, vol. A238, pp. 219–74.10.1016/S0921-5093(97)00424-3 ↗