journal article·2012-10

Deformation Processing Maps for Control of Microstructure in Al-Cu-Mg Alloys Microalloyed with Sn

Sanjib Banerjee, P. S. Robi, A. Srinivasan

Publisher page

Abstract

High-temperature deformation behaviors of Al-5.9 pct Cu-0.5 pct Mg alloy and Al-5.9 pct Cu-0.5 pct Mg alloy containing 0.06 wt pct Sn were studied by hot compression tests conducted at different temperatures and strain rates. Trace content of Sn resulted in a significant increase of flow stress at various processing conditions. Artificial neural network (ANN) modeling was carried out providing excellent prediction of flow stress at different combinations of strain, strain rate, and temperature. It was possible to predict 100 and 89 pct of the flow stress values of the respective alloys within an error less than ±10 pct. The generated flow stress data were used to develop processing maps to delineate the process domains for safe metal working. The power dissipation efficiency maps revealed a maximum efficiency of 60 and 40 pct, respectively, for the base alloy and the microalloyed material. The instability maps generated for the Sn containing alloy revealed only one instability regime. The safe processing zone of the investigated alloys primarily lies at lower regimes of strain rate, which is extended up to higher deformation temperatures, with trace addition of Sn. Optical microscopy characterized these stable regions as dynamic recrystallization (DRX), which resulted in considerable flow softening observed at a low strain rate of 0.001 s−1. Instability was observed mainly due to shear band formation or intercrystalline cracking.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. A. Heinz, A. Haszler, C. Keidel, S. Moldenhauer, R. Benedictus, and W.S. Miller: Mater. Sci. Eng. A, 2000, vol. 80, pp. 102–07.10.1016/S0921-5093(99)00674-7 ↗
2. Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, vol. 2, ASM Handbook, ASM INTERNATIONAL, Metals Park, OH, 1990, pp. 3–215.
3. K. Sukumaran, K.K. Ravikumar, S.G.K. Pillai, T.P.D. Rajan, M. Ravi, R.M. Pillai, and B.C. Pai: Mater. Sci. Eng. A, 2008, vol. 490, pp. 235–41.10.1016/j.msea.2008.01.054 ↗
4. P. Naga Raju, K. Srinivasa Rao, G.M. Reddy, M. Kamaraj, and K. Prasad Rao: Mater. Sci. Eng. A, 2007, vol. 464, pp. 192–201.10.1016/j.msea.2007.01.144 ↗
5. J. Wang, D. Yi, X. Su, and F. Yin: Mater. Charact., 2008, vol. 59, pp. 965–68.10.1016/j.matchar.2007.08.007 ↗
6. K. Yu, W. Li, S. Li, and J. Zhao: Mater. Sci. Eng. A, 2004, vol. 368, pp. 88–93.10.1016/j.msea.2003.09.092 ↗
7. S. Hirosawa, T. Sato, A. Kamio, and H.M. Flower: Acta Mater., 2000, vol. 48, pp. 1797–1806.10.1016/S1359-6454(99)00475-9 ↗
8. T.B. Sercombe and G.B. Schaffer: Mater. Sci. Eng. A, 1999, vol. 268, pp. 32–39.10.1016/S0921-5093(99)00126-4 ↗
9. G.B. Schaffer, S.H. Huo, J. Drennan, and G.J. Auchterlonie: Acta Mater., 2001, vol. 49, pp. 2671–78.10.1016/S1359-6454(01)00177-X ↗
10. J.M. Silcock and H.M. Flower: Scripta Mater., 2002, vol. 46, pp. 389–94.10.1016/S1359-6462(02)00003-9 ↗
11. V. Ocenasek and M. Slamova: Mater. Charact., 2001, vol. 47, pp. 157–62.10.1016/S1044-5803(01)00165-6 ↗
12. Vesnamaksimovic, Slavicazec, Velimir Radmilovic, and M.T. Jovanovic: J. Serb. Chem. Soc., 2003, vol. 68 (11), pp. 893–901.10.2298/JSC0311893M ↗
13. P. Ward Flynn, J. Mote, and J.E. Dorn: Trans. TMS-AIME, 1961, vol. 221, pp. 1148–54.
14. J.J. Jonas, C.M. Sellars, and W.J. McG. Tegart: Metall. Rev., 1969, vol. 14 (1), pp. 1–24.10.1179/mtlr.1969.14.1.1 ↗
15. H.J. Frost and M.F. Ashby: Deformation Mechanism Maps, Pergamon Press, New York, NY, 1982, pp. 157–210.
16. R. Raj: Metall. Trans. A, 1981, vol. 12A, pp. 1089–97.10.1007/BF02643490 ↗
17. Y.V.R.K. Prasad and S. Sasidhara: Hot Working Guide: A Compendium of Processing Maps, ASM INTERNATIONAL, Materials Park, OH, 1997, pp. 1–24.
18. Y.V.R.K. Prasad, H.L. Gegel, S.M. Doraivelu, J.C. Malas, J.T. Morgan, K.A. Lark, and D.R. Barker: Metall. Trans. A, 1984, vol. 15A, pp. 1883–92.10.1007/BF02664902 ↗
19. Y.V.R.K. Prasad: Indian J. Technol., 1990, vol. 28, pp. 435–51.
20. V.V. Kutumba Rao and T. Rajagopalachary: Bull. Mater. Sci., 1996, vol. 19, pp. 677–98.10.1007/BF02745160 ↗
21. H.J. McQueen, E. Evangelista, and N.D. Ryan: Proc. Recrystallization, T. Chandra, ed., TMS-AIME, Warrendale, PA, 1990, pp. 81–117.
22. Y.V.R.K. Prasad and N. Ravichandran: Bull. Mater. Sci., 1991, vol. 14, pp. 1241–48.10.1007/BF02744618 ↗
23. W. Roberts: in Deformation Processing and Structure, G. Krauss, ed., ASM, Metals Park, OH, 1984, pp. 210–69.
24. T. Sakai and J.J. Jonas: Acta Metall., 1984, vol. 32, pp. 189–209.10.1016/0001-6160(84)90049-X ↗
25. B.L. Zhang, M.S. Maclean, and T.N. Baker: Mater. Sci. Technol., 2000, vol. 16, pp. 897–902.10.1179/026708300101507866 ↗
26. S.V.S. Narayana Murty, B. Nageshwara Rao, and B.P. Kashyap: Int. Mater. Rev., 2000, vol. 45, pp. 15–26.10.1179/095066000771048782 ↗
27. Y.V.R.K. Prasad, T. Seshacharyalu, S.C. Medeiors, and W.G. Frazier: Mater. Sci. Technol., 2000, vol. 16, pp. 511–16.10.1179/026708300101508171 ↗
28. N. Ravichandran and Y.V.R.K. Prasad: Metall. Trans. A, 1991, vol. 22, pp. 2339–48.10.1007/BF02665000 ↗
29. M.J. Luton and C.M. Sellars: Acta Metall., 1969, vol. 17, pp. 1033–43.10.1016/0001-6160(69)90049-2 ↗
30. C. Poletti, H. Dieringa, and F. Warchomicka: Mater. Sci. Eng. A, 2009, vol. 516, pp. 138–47.10.1016/j.msea.2009.03.007 ↗
31. D. Zhao, P.K. Chaudhury, M. Thirukkonda, and J.J. Valencia: in Intermetallic Matrix Composites III, J.J. Graves, R.R. Bowman, and J.J. Lewandowski, eds., Materials Research Society, Pittsburgh, PA, 1994, pp. 305–43.
32. A. Al Omar, J.M. Cabrera, and J.M. Prado: Scripta Mater., 1996, vol. 34, pp. 1303–08.10.1016/1359-6462(95)00651-6 ↗
33. S. Venugopal, S.L. Mannan, and Y.V.R.K. Prasad: Mater. Sci. Eng. A, 1993, vol. 160, pp. 63–69.10.1016/0921-5093(93)90498-4 ↗
34. S. Ramanathan, R. Karthikeyan, V.D. Kumar, and G. Ganesan: J. Mater. Sci. Technol., 2006, vol. 22 (5), pp. 611–15.10.1179/174328406X84076 ↗
35. K.P. Rao, Y.V.R.K. Prasad, and K. Sivaram: Mater. Lett., 1990, vol. 10 (1), pp. 66–70.10.1016/0167-577X(90)90016-F ↗
36. E. Cerri, S. Spigarelli, E. Evangelista, and P. Cavaliere: Mater. Sci. Eng. A, 2002, vol. 324, pp. 157–61.10.1016/S0921-5093(01)01299-0 ↗
37. S.V. Kailas, Y.V.R.K. Prasad, and S.K. Biswas: Metall. Trans. A, 1993, vol. 24A, pp. 2513–20.10.1007/BF02646530 ↗
38. M. Gang, L. Bolong, L. Hongmei, H. Hui, and N. Zuoren: Mater. Sci. Eng. A, 2009, vol. 517, pp. 132–37.
39. Yang Sheng, YI Danqing, Zhang Hong, and YAO Sujuan: J. Wuhan Univ. Technol. Mater. Sci. Ed., 2008, vol. 23 (5), pp. 694–98.10.1007/s11595-007-5694-x ↗
40. Hui Zhang, Luoxing Li, Deng Yuan, and Dashu Peng: Mater. Charact., 2007, vol. 58, pp. 168–73.10.1016/j.matchar.2006.04.012 ↗
41. X.Y. Liu, Q.L. Pan, Y.B. He, W.B. Li, W.J. Liang, and Z. Min: Mater. Sci. Eng. A, 2009, vol. 500, pp. 150–54.10.1016/j.msea.2008.09.028 ↗
42. P. Cavaliere: J. Light Met., 2002, vol. 2, pp. 247–52.10.1016/S1471-5317(03)00008-7 ↗
43. R. Kaibyshev, O. Sitdikov, I. Mazurina, and D.R. Lesuer: Mater. Sci. Eng. A, 2002, vol. 334, pp. 104–13.10.1016/S0921-5093(01)01777-4 ↗
44. P.S. Robi and U.S. Dixit: J. Mater. Process. Technol., 2003, vol. 142, pp. 289–94.10.1016/S0924-0136(03)00579-X ↗
45. Y.C. Lin, Lei-Ting Li, and Yu-Chi Xia: Comput. Mater. Sci., 2011, vol. 50 (7), pp. 2038–43.10.1016/j.commatsci.2011.02.004 ↗
46. H. Ziegler: in Progress in Solid Mechanics, vol. 4, I.N. Sneddon and R. Hill, eds., John Wiley & Sons, New York, NY, 1965, pp. 145–263.
47. A.K.S. Kalyan Kumar: Master’s Thesis, Indian Institute of Science, Bangalore, India, 1987, pp. 1–77.
48. S.F. Medina and C.A. Hernandez: Acta Mater., 1996, vol. 44 (1), pp. 137–48.10.1016/1359-6454(95)00151-0 ↗
49. Yang Hui, Li Zhen-hong, and Zhang Zhi-liang: J. Zhejiang Univ. Sci. A, 2006, vol. 7 (8), pp. 1453–60.10.1631/jzus.2006.A1453 ↗
50. E. Evangelista, A. Forcellesa, F. Gabrielli, and P. Mengucci: J. Mater. Process. Technol., 1990, vol. 24, pp. 323–32.10.1016/0924-0136(90)90193-X ↗
51. Z.Y. Chen, S.Q. Xu, and X.H. Dong: Acta Metall. Sinica (Engl. Lett.), 2008, vol. 21 (6), pp. 451–58.10.1016/S1006-7191(09)60008-9 ↗
52. S. Banerjee, P.S. Robi, A. Srinivasan, and P.K. Lakavath: Mater. Sci. Eng. A, 2010, vol. 527, pp. 2498–2503.10.1016/j.msea.2010.01.052 ↗
53. S. Banerjee, P.S. Robi, A. Srinivasan, and P.K. Lakavath: Mater. Des., 2010, vol. 31, pp. 4007–15.10.1016/j.matdes.2010.03.012 ↗
54. A.M.A. Mohamed, F.H. Samuel, A.M. Samuel, H.W. Doty, and S. Valtierra: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 490–501.10.1007/s11661-007-9454-5 ↗
55. L.F. Mondolfo: Aluminum Alloys, Structure and Properties, Butterworth and Co., London, 1976.
56. Sanjib Banerjee, P.S. Robi, and A. Srinivasan: J. Mater. Sci., 2012, vol. 47, pp. 929–48.10.1007/s10853-011-5873-1 ↗
57. C. Gandhi: Metall. Trans. A, 1982, vol. 13, pp. 1233–38.10.1007/BF02645506 ↗
58. C.M. Styles, I. Sinclair, P.J. Gregson, and S.M. Flitcroft: Mater. Sci. Technol., 1994, vol. 10, pp. 475–80.10.1179/026708394790164086 ↗