journal article·2015-01

Effect of Heat Input on Microstructure Evolution and Mechanical Properties in the Weld Heat-Affected Zone of 9Cr-2W-VTa Reduced Activation Ferritic-Martensitic Steel for Fusion Reactor

Joonoh Moon, Chang-Hoon Lee, Tae-Ho Lee, Hyoung Chan Kim

Publisher page

Abstract

The phase transformation and mechanical properties in the weld heat-affected zone (HAZ) of a reduced activation ferritic/martensitic steel were explored. The samples for HAZs were prepared using a Gleeble simulator at different heat inputs. The base steel consisted of tempered martensite and carbides through quenching and tempering treatment, whereas the HAZs consisted of martensite, δ-ferrite, and a small volume of autotempered martensite. The prior austenite grain size, lath width of martensite, and δ-ferrite fraction in the HAZs increased with increase in the heat input. The mechanical properties were evaluated using Vickers hardness and Charpy V-notch impact test. The Vickers hardness in the HAZs was higher than that in the base steel but did not change noticeably with increase in the heat input. The HAZs showed poor impact property due to the formation of martensite and δ-ferrite as compared to the base steel. In addition, the impact property of the HAZs deteriorated more with the increase in the heat input. Post weld heat treatment contributed to improve the impact property of the HAZs through the formation of tempered martensite, but the impact property of the HAZs remained lower than that of base steel.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fusion materials and technologies · Microstructure and Mechanical Properties of Steels · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. B. Raj and T. Jayakumar: J. Nucl. Mater., 2011, vol. 417, pp. 72-76.10.1016/j.jnucmat.2011.02.032 ↗
2. R. L. Klueh, D.S. Gelles, S. Jitsukawa, A. Kimura, G.R. Odette, B. van der Schaaf and M. Victoria: J. Nucl. Mater., 2002, vol. 307-311, pp. 455-65.10.1016/S0022-3115(02)01082-6 ↗
3. X. Chen, Y. Huang, B. Madigan and J. Zhou: Fusion Eng. Des., 2012, vol. 87, pp. 1639-46.10.1016/j.fusengdes.2012.06.009 ↗
4. R. Lindau, A. Möslang, M. Rieth, M. Klimiankou, E. Materna-Morris, A. Alamo, A.-A. F. Tavassoli, C. Cayron, A.-M. Lancha, P. Fernandex, N. Baluc, R. Schaublin, E. Diegele, G. Filacchioni, J.W. Rensman, R.v.d. Schaaf, E. Lucon and W. Dietz: Fusion Eng. Des., 2005, vol. 75-79, pp. 989-96.10.1016/j.fusengdes.2005.06.186 ↗
5. R.L. Klueh, D.J. Alexander and M.A. Sokolov: J. Nucl. Mater., 2002, vol. 304, pp. 139-52.10.1016/S0022-3115(02)00885-1 ↗
6. M. Tamura, H. Sakasegawa, A. Kohyama, H. Esaka and K. Shinozuka: J. Nucl. Mater., 2003, vol. 321, pp. 288-93.10.1016/S0022-3115(03)00281-2 ↗
7. V. Shankar, K. Mariappan, A. Nagesha, G.V. Prasad Reddy, R. Sandhya, M.D. Mathew and T. Jayakumar: Fusion Eng. Des., 2012, vol. 87, pp. 318-24.10.1016/j.fusengdes.2012.01.020 ↗
8. P. Aubert, F. Tavassoli, M. Rieth, E. Diegele and Y. Poitevin: J. Nucl. Mater., 2011, vol. 417, pp. 43-50.10.1016/j.jnucmat.2010.12.248 ↗
9. B. Raj, K. Bhanu Sankara Rao and A.K. Bhaduri: Fusion Eng. Des., 2010, vol. 87, pp. 1460-8.10.1016/j.fusengdes.2010.04.008 ↗
10. P. Aubert, F. Tavassoli, M. Rieth, E. Diegele and Y. Poitevin: J. Nucl. Mater., 2011, vol. 409, pp. 156-62.10.1016/j.jnucmat.2010.09.009 ↗
11. S. Zheng, Q. Wu, Q. Huang, S. Liu and Y. Han: Fusion Eng. Des., 2011, vol. 86, pp. 2616-9.10.1016/j.fusengdes.2011.02.072 ↗
12. B. Arivazhagan, G. Srinvasan, S.K. Albert and A.K. Bhaduri: Fusion Eng. Des., 2011, vol. 86, pp. 192-7.10.1016/j.fusengdes.2010.12.035 ↗
13. J. Moon, C.-H. Lee, T.-H. Lee, M.-H. Jang, M.-G. Park and H.N. Han: J. of Nucl. Mater., 2014, vol. 455, pp. 81-5.10.1016/j.jnucmat.2014.04.048 ↗
14. K. Easterling: Introduction to the physical metallurgy of welding, Butterworth, London, U.K., 1983, pp. 17-26.
15. K.H. Kuo and C.L. Jia: Acta Metall., 1985, vol. 33, pp. 991-6.10.1016/0001-6160(85)90193-2 ↗
16. S. Shanmugam, R.D.K. Misra, T. Mannering, D. Panda and S.G. Jansto: Mater. Sci. & Eng. A, 2006, vol. 437, pp. 436-45.10.1016/j.msea.2006.08.007 ↗
17. C.-H. Lee, J. Moon, M.-G. Park, T.-H. Lee, M.-H. Jang, H.C. Kim and D.-W. Suh. J. of Nucl. Mater., 2014, vol. 455, pp. 421-5.10.1016/j.jnucmat.2014.07.047 ↗
18. M. Rieth, M. Schirra, A. Falkenstein, P. Graf, S. Heger, H. Kempe, R. Lindau, and H. Zimmermann: Wissenschaftliche Berichte, FZKA 6911. ISSN 0947-8620, October 2003.
19. E.E. Patterson, D.P. Field and Y. Zhang: Mater. Char., 2013, vol. 85, pp. 100-10.10.1016/j.matchar.2013.08.016 ↗
20. M. Abbasi, T.W. Nelson, C.D. Sorensen and L. Wei: Mater. Char., 2012, vol. 66, pp. 1-8.10.1016/j.matchar.2012.01.010 ↗
21. C. Cayron: Mater. Char., 2014, vol. 94, pp. 93-110.10.1016/j.matchar.2014.05.015 ↗
22. E.V. Pereloma, I.B. Timokhina and S.P. Swenser: Micron, 2001, vol. 32, pp. 825-9.10.1016/S0968-4328(00)00090-1 ↗
23. J. Moon, S.-J. Kim and C. Lee: Mater. Sci. & Eng. A, 2011, vol. 528, pp. 7658-62.10.1016/j.msea.2011.06.067 ↗
24. A. García-Junceda, C. Capdevila, F.G. Caballero and C. García de Andrés: Scripta Mater., 2008, vol. 58, pp. 134-7.10.1016/j.scriptamat.2007.09.017 ↗
25. P. Wang, S.P. Lu, N.M. Xiao, D.Z. Li and Y.Y. Li: Mater. Sci. & Eng. A, 2010, vol. 527, pp. 3210-6.10.1016/j.msea.2010.01.085 ↗
26. T. Karthikeyan, V. Thomas Paul, S. Saroja, A. Moitra, G. Sasikala and M. Vijayalakshmi: J. Nucl. Mater., 2011, vol. 419, pp. 256-62.10.1016/j.jnucmat.2011.08.010 ↗
27. S. Kim, S. Lee and B.S. Lee: Mater. Sci. & Eng. A, 2003, vol. 359, pp. 198-209.10.1016/S0921-5093(03)00344-7 ↗