Fretting Wear Properties of TiCN-Ni Cermets: Influence of Load and Secondary Carbide Addition
Source abstract
Abstract
The increasing demand for TiCN-based cermets in tribological applications necessitates a thorough understanding of the influence of experimental as well as material parameters on the friction and wear properties. In optimizing microstructure and properties, secondary carbides are added to baseline TiCN-Ni cermet. The present work aims at evaluating the fretting wear behavior of Ti(CN)-Ni cermets containing various secondary carbides, such as WC, NbC, TaC, and HfC, against steel at different loading (2, 6, and 10 N) conditions. The evolution of tangential frictional force for the investigated cermets was analyzed in terms of fretting logs and fretting loops. The topographical characterization of worn surfaces was performed, using laser surface profilometry and a scanning electron microscope (SEM) equipped with energy-dispersive spectroscopy (EDS) capability. The steady-state coefficient of friction (COF) was minimum (0.33) for a TiCN-20Ni cermet/steel tribocouple, while a maximum COF (0.47) was recorded for TiCN-20Ni-10HfC cermet/steel at a 2-N load. The wear rate of the cermets varied in the range of 1.7 × 10−6 to 3.5 × 10−6 mm3/Nm. The TiCN-20Ni-10HfC cermet exhibited poor wear resistance among investigated cermets. The dominant wear mechanisms were found as abrasion and tribolayer formation. The dominance of abrasion is explained in terms of cumulative energy dissipation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Metal and Thin Film Mechanics · Orthopaedic implants and arthroplasty
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. P. Ettmayer, H. Kolaska, W. Lengauer, K. Dreyer: Int. J. Refract. Met. Hard Mater., 1995, vol. 13, pp. 343–5110.1016/0263-4368(95)00027-G ↗
2. S. Zhang: Mater. Sci. Eng., A, 1993, vol. 163, pp. 141–4810.1016/0921-5093(93)90588-6 ↗
3. S. Ahn, S. Kang: Int. J. Refract. Met. Hard Mater., 2001, vol. 19, pp. 539–4510.1016/S0263-4368(01)00044-0 ↗
4. W.T. Kwon, J.S. Park, S.W. Kim, S. Kang: Int. J. Mach. Tools Manufact., 2004, vol. 44, pp. 341–4610.1016/j.ijmachtools.2003.10.023 ↗
5. S. Mun, S. Kang: Powder Metall., 1999, vol. 42 (3), pp. 251–5610.1179/003258999665594 ↗
6. U. Rolander, G. Winel, M. Zwinkls: Int. J. Refract. Met. Hard Mater., 2001, vol. 19, pp. 325–2810.1016/S0263-4368(01)00042-7 ↗
7. F. Qi, S. Kang: Mater. Sci. Eng., A, 1998, vol. 251, pp. 276–8510.1016/S0921-5093(98)00609-1 ↗
8. H. Suzuki, H. Matsubara: Jpn. Soc. Powder Metall., 1986, vol. 33 (4), pp. 199–20310.2497/jjspm.33.199 ↗
9. S. Ahn, S. Kang: J. Am. Ceram. Soc., 2000, vol. 83 (6), pp. 1489–9410.1111/j.1151-2916.2000.tb01415.x ↗
10. B.V. Manoj Kumar, B. Basu, S. Kang, J. Ramkumar: J. Am. Ceram. Soc., 2006, vol. 89 (12), pp. 3827–3110.1111/j.1551-2916.2006.01277.x ↗
11. B.V. Manoj Kumar, J. Ram Kumar, B. Basu: Int. J. Refract. Met. Hard Mater., 2007, vol. 25, pp. 392–9910.1016/j.ijrmhm.2006.12.001 ↗
12. B.V. Manoj Kumar, J. Ramkumar, B. Basu, S. Kang: Int. J. Refract. Met. Hard Mater., 2007, vol. 25 (4), pp. 293–9910.1016/j.ijrmhm.2006.07.001 ↗
13. B.V. Manoj Kumar, B. Basu, M. Kalin, J. Vizintin: J. Am. Ceram. Soc., 2007, vol. 90 (5), pp.1534–4010.1111/j.1551-2916.2007.01630.x ↗
14. D. Sarkar, B.V. Manoj Kumar, S. Ahn, S. Kang, B. Basu: Key Eng. Mater., 2004, vols. 264–268, pp. 1115–1810.4028/www.scientific.net/KEM.264-268.1115 ↗
15. K. Kameo, K. Friedrich, J.F. Bartolome, M. Dýáz, S. Lopez-Esteban, J.S. Moya: J. Eur. Ceram. Soc., 2003, vol. 23, pp. 2867–7710.1016/S0955-2219(03)00297-8 ↗
16. E.T. Jeon, J. Joardar, S. Kang: Int. J. Refract. Met. Hard Mater., 2002, vol. 20, pp. 207–1110.1016/S0263-4368(02)00004-5 ↗
17. F. Arenas, C. Rondón, R. Sepúlveda: J. Mater. Process. Technol., 2003, vols. 143–144, pp. 822–2610.1016/S0924-0136(03)00340-6 ↗
18. J. Pirso, M. Viljus, S. Letunovits: Tribol. Int., 2004, vol. 37 (10), pp. 817–2410.1016/j.triboint.2004.04.009 ↗
19. S. Economou, M. De Bonte, J.P. Celis, J.R. Roos, R.W. Smith, E. Lugscheider, E. Valencic: Wear, 1995, vol. 185, pp. 93–11010.1016/0043-1648(95)06597-0 ↗
20. I.Y. Konyashin: Surf. Coat. Technol., 1995, vol. 71, pp. 284–9110.1016/0257-8972(94)02326-L ↗
21. V. Richter, A. Beger, J. Drobniewski, I. Endler, E. Wolf: Mater. Sci. Eng., A, 1996, vol. 209, pp. 353–5710.1016/0921-5093(95)10109-8 ↗
22. P.Q. Campbell, J.-P. Celis, J.R. Roos, O. Van Der Biest: Wear, 1994, vol. 274, pp. 47–5610.1016/0043-1648(94)90085-X ↗
23. H. Thoors, H. Chandrasekaran, P. Olund: Wear, 1993, vols. 162–164, pp. l-11
24. F. Akhtar, S.J. Guo: Mater. Charact., 2008, vol. 59 (1), pp. 84–9010.1016/j.matchar.2006.10.021 ↗
25. F. Akhtar, S.J. Guo: Acta Mater., 2007, vol. 55 (4), pp. 1467–7710.1016/j.actamat.2006.10.009 ↗
26. K.-H. Zum Gahr: Microstructure and Wear of Materials, Trib. Series 10, Elsevier, Amsterdam, 1987, p. 383
27. O. Vingsbo, S. Stierberg: Wear, 1988, vol. 126, pp. 131–4710.1016/0043-1648(88)90134-2 ↗
28. R.C. Bill: “Fretting of Titanium at Temperatures to 650 °C in Air,” NASA Report, Ohio, OH, 1975
29. D.K. Shetty, I.G. Wright, P.N. Mincer, A.H. Clauer: J. Mater. Sci., 1985, vol. 20, pp. 1873–8210.1007/BF00555296 ↗
30. B.V. Manoj Kumar, R. Balasubramiam, B. Basu: J. Am. Ceram. Soc., 2007, vol. 90 (1), pp. 205–1010.1111/j.1551-2916.2006.01412.x ↗
31. E. Marui, M. Hashimoto, S. Kato, W. Kojima: Wear, 1992, vol. 159, pp. 141–5010.1016/0043-1648(92)90296-K ↗
32. M.Z. Huq, J.-P. Celis: Wear, 1997, vol. 212, pp. 151–5910.1016/S0043-1648(97)00167-1 ↗
33. H. Czichos: Tribology, Elsevier, Amsterdam, 1978
34. A.G. Evans, D.B. Marshall: in Fundamentals of Friction and Wear of Materials, D.A. Rigney, ed., ASM, Materials Park, OH, 1981, pp. 439–52
35. B. Bhushan: Principles and Applications of Tribology, John Wiley & Sons, Inc., New York, NY, 1999, pp. 507–09
36. B.V. Manoj Kumar and B. Basu: Int. J. Refract. Met. Hard Mater., 2008, in press
37. B.V. Manoj Kumar, B. Basu, J. Vizintin, and M. Kalin: J. Mater. Res., 2008, in press
38. J.F. Archard: J. Appl. Phys., 1953, vol. 24, pp. 981–8810.1063/1.1721448 ↗