Pack Aluminization Synthesis of Superalloy 3D Woven and 3D Braided Structures
Source abstract
Abstract
Micro-architectured, precipitation-strengthened structures were created in a new process combining weaving, gas-phase alloying, diffusion, and precipitation. First, high-ductility Ni-20 wt pct Cr wires with 202 μm diameter were braided, or non-crimp orthogonal woven, into three-dimensional structures. Second, these structures were vapor-phase alloyed with Al at 1273 K (1000 °C) by pack cementation, creating uniform NiAl coatings on the wires when using a retort. Also, solid-state bonding was achieved at wire intersections, where two wires were sufficiently close to each other, as determined via optical and X-ray tomographic microscopy. Third, the NiAl-coated wires were fully homogenized and aged to form γ′ precipitates distributed in a γ matrix phase, the same microstructure providing strength in nickel-based superalloys. The resulting structures—consisting of wires (i) woven in a controlled three-dimensional architecture, (ii) bonded at contact points and (iii) strengthened by γ′ precipitates—are expected to show high strength at ambient and elevated temperatures, low density, and high permeability which is useful for active cooling.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Cellular and Composite Structures · Additive Manufacturing and 3D Printing Technologies · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. R. Lakes: Nature, 1993, vol. 361, pp. 511–15.10.1038/361511a0 ↗
2. H.N.G. Wadley: Philos. Trans. R. Soc. A, 2006, vol. 364, pp. 31–68.10.1098/rsta.2005.1697 ↗
3. H.N.G. Wadley, N.A. Fleck, and A.G. Evans: Compos. Sci. Technol., 2003, vol. 63, pp. 2331–43.10.1016/S0266-3538(03)00266-5 ↗
4. N.A. Fleck, V.S. Deshpande, and M.F. Ashby: Proc. R. Soc. A, 2010, vol. 466, pp. 2495–2516.10.1098/rspa.2010.0215 ↗
5. T.A. Schaedler, A.J. Jacobsen, A. Torrents, A.E. Sorensen, J. Lian, J.R. Greer, L. Valdevit, and W.B. Carter: Science, 2011, vol. 334, pp. 962–65.10.1126/science.1211649 ↗
6. J.-H. Lim and K.-J. Kang: Mater. Trans., 2006, vol. 47, pp. 2154–60.10.2320/matertrans.47.2154 ↗
7. Y.-H. Lee, B.-K. Lee, I. Jeon, and K.-J. Kang: Acta Mater., 2007, vol. 55, pp. 6084–94.10.1016/j.actamat.2007.07.023 ↗
8. Y. Brechet and J.D. Embury: Scripta Mater., 2013, vol. 68, pp. 1–3.10.1016/j.scriptamat.2012.07.038 ↗
9. M. Ashby: Scripta Mater., 2013, vol. 68, pp. 4–7.10.1016/j.scriptamat.2012.04.033 ↗
10. A.G. Evans, J.W. Hutchinson, N.A. Fleck, M.F. Ashby, and H.N.G. Wadley: Prog. Mater. Sci., 2001, vol. 46, pp. 309–27.10.1016/S0079-6425(00)00016-5 ↗
11. L. Valdevit, A.J. Jacobsen, J.R. Greer, and W.B. Carter: J. Am. Ceram. Soc., 2011, vol. 94, pp. 1–20.10.1111/j.1551-2916.2011.04599.x ↗
12. J.K. Guest and J.H. Prevost: Int. J. Solids. Struct., 2006, vol. 43, pp. 7028–47.10.1016/j.ijsolstr.2006.03.001 ↗
13. V.J. Challis, J.K. Guest, J.F. Grotowski, and A.P. Roberts: Int. J. Solids Struct., 2012, vol. 49, pp. 3397–3408.10.1016/j.ijsolstr.2012.07.019 ↗
14. S. Ha and J.K. Guest: Unpublished Research, Johns Hopkins University, Baltimore, MD, 2014.
15. M.V. Nathal, J.D. Whittenberger, M.G. Hebsur, P.T. Kantzos, and D.L. Krause: in Superalloys 2004, eds., K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, TMS, 2004, pp. 431–39.10.7449/2004/Superalloys_2004_431_439 ↗
16. Q.M. Zhang and X.D. He: Mater. Charact., 2009, vol. 60, pp. 178–82.10.1016/j.matchar.2008.08.013 ↗
17. L. Murr, S. Li, Y. Tian, K. Amato, E. Martinez, and F. Medina: Materials, 2011, vol. 4, pp. 782–90.10.3390/ma4040782 ↗
18. D.E. Burns, Y. Zhang, M. Teutsch, K. Bade, J. Aktaa, and K.J. Hemker: Scripta Mater., 2012, vol. 67, pp. 459–62.10.1016/j.scriptamat.2012.06.003 ↗
19. A.M. Hodge and D.C. Dunand: Intermetallics, 2001, vol. 9, pp. 581–89.10.1016/S0966-9795(01)00047-4 ↗
20. H. Choe and D.C. Dunand: Acta Mater., 2004, vol. 52, pp. 1283–95.10.1016/j.actamat.2003.11.012 ↗
21. Q. Pang, G.H. Wu, Z.Y. Xiu, G.Q. Chen, and D.L. Sun: Mater. Sci. Eng. A, 2012, vol. 534, pp. 699–706.10.1016/j.msea.2011.12.034 ↗
22. Q. Pang, Z.Y. Xiu, G.H. Wu, L.T. Jiang, D.L. Sun, and Z.L. Hu: J. Mater. Process. Technol., 2012, vol. 212, pp. 2219–27.10.1016/j.jmatprotec.2012.06.017 ↗
23. E.G. Gilson: Process of Treating Metals, US 1,091,057, US Patent Office, 1913.
24. G.W. Goward and D.H. Boone: Oxid. Met., 1971, vol. 3, pp. 475–95.10.1007/BF00604047 ↗
25. D.K. Das, V. Singh, and S.V. Joshi: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2173–88.10.1007/s11661-998-0042-0 ↗
26. S.J. Johnson, B. Tryon, and T.M. Pollock: Acta Mater., 2008, vol. 56, pp. 4577–84.10.1016/j.actamat.2008.05.013 ↗
27. D. Erdeniz and D.C. Dunand: Intermetallics, 2014, vol. 50, pp. 43–53.10.1016/j.intermet.2014.02.009 ↗
28. F.K. Ko: in Engineered Materials Handbook, T.J. Reinhart, ed., ASM International, Metals Park, OH, 1987, pp. 519–28.
29. F.K. Ko: Am. Ceram. Soc. Bull., 1989, vol. 68, pp. 401–14.
30. T.D. Kostar and T.-W. Chou: in 3-D Textile Reinforcements in Composite Materials, A. Miravete, ed., Woodhead Publ. Ltd., Cambridge, England, 1999, pp. 217–40.10.1533/9781845691929.217 ↗
31. D. Mungalov and A.E. Bogdanovich: SAMPE J., 2004, vol. 40, pp. 7–20.
32. A.E. Bogdanovich and D. Mungalov: in Proceedings of the International Composites Conference ACUN-4, S. Bandyopadhyay, ed., Sydney, Australia, 2002, pp. 61–72.
33. D. Mungalov and A.E. Bogdanovich: Automated 3-D Braiding Machine and Method, US 6,439,096, US Patent Office, 2002.
34. L.A. Feldkamp, L.C. Davis, and J.W. Kress: J. Opt. Soc. Am. A, 1984, vol. 1, pp. 612–19.10.1364/JOSAA.1.000612 ↗
35. M.L. Comer and E.J. Delp: IEEE Trans. Image Process., 2000, vol. 9, pp. 1731–44.10.1109/83.869185 ↗
36. A.D. Smigelskas and E.O. Kirkendall: Trans. Am. Inst. Min. Metall. Eng., 1947, vol. 171, pp. 130–42.
37. D.C. Tu and L.L. Seigle: Thin Solid Films, 1982, vol. 95, pp. 47–56.10.1016/0040-6090(82)90581-8 ↗
38. M.M.P. Janssen and G.D. Rieck: Trans. Metall. Soc. AIME, 1967, vol. 239, pp. 1372–85.
39. M. Britchi, N. Ene, M. Olteanu, E. Vasile, P. Nita, and E. Alexandrescu: Defect Diffus. Forum, 2010, vol. 297–301, pp. 1–7.10.4028/www.scientific.net/DDF.297-301.1 ↗
40. F.S. Nogorani, F. Ashrafizadeh, and A. Saatchi: Surf. Coat. Technol., 2012, vol. 210, pp. 97–102.10.1016/j.surfcoat.2012.08.071 ↗
41. J. Li, C.Q. Xia, and Y. Gu: J. Cent. South Univ. Technol., 2004, vol. 11, pp. 15–18.10.1007/s11771-004-0003-8 ↗
42. G.X. Hu, Z.X. Xu, J.J. Liu, and Y.H. Li: Surf. Coat. Technol., 2009, vol. 203, pp. 3392–97.10.1016/j.surfcoat.2009.04.031 ↗
43. D. Schmidt, M. Galetz, and M. Schutze: Oxid. Met., 2013, vol. 79, pp. 589–99.10.1007/s11085-012-9340-4 ↗
44. D. Tabor: J. Inst. Met., 1951, vol. 79, pp. 1–18.
45. F.T. Louis: Smithells Metals Reference Book, ed. E.A. Brandes, Butterworth & Co Ltd., England, 1983, pp. 22–69.