Computation and validation of weld pool dimensions and temperature profiles for gamma TiAl
Source abstract
Abstract
Previous research by the authors has shown that the welding current has a strong effect on the weld properties and microstructures of gamma TiAl. This article presents the results of experimentally measured and theoretically predicted temperature profiles of gas tungsten arc (GTA) welded gamma TiAl for welding currents of 75 and 100 A. The GTA welding model used in this study accounts for the fluid flow in the weld pool as well as conductive, convective, and phase change heat transfer processes in the solid, liquid, and mushy regions of a metal. The computed temperature fields predicted that as the welding current is increased, the maximum temperature reached in the weld pool also increases. Experimental validation of the computed temperature fields was determined by placing thermocouples at three locations on the specimen, to record the temperatures during welding using computer-based data acquisition hardware and software. The agreement between theoretical predictions and measurements was reasonably good, which provided a direct validation of the model.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Additive Manufacturing Materials and Processes · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. P. Threadgill: Mater. Sci. Eng. A, 1995, vol. 192–193, pp. 640–46.10.1016/0921-5093(94)03346-3 ↗
2. L.C. Mallory, W. Baeslack III, and D. Phillips: J. Mater. Sci. Lett, 1994, vol. 13, pp. 1061–65.10.1007/BF00277040 ↗
3. S. Kuo and D.K. Sun: Metall. Trans. A, 1985, vol. 16A, pp. 203–13.
4. W.H. Kim, H.G. Fan, and S.-J. Na: Numer. Heat Transfer Part A, 1997, vol. 32, pp. 633–52.10.1080/10407789708913910 ↗
5. T. DebRoy: Proc. Julian Szekely Memorial Symp. on Materials Processing, H.Y. Sohn, J.W. Evans, and D. Apelian, eds., TMS, Warrendale, PA, 1997, pp. 365–79.
6. G.M. Oreper and J. Szekely: J. Fluid. Mech., 1984, vol. 147, pp. 53–79.10.1017/S0022112084001981 ↗
7. N.S. Tsai and T.W. Eagar: Metall. Trans. B, 1985, vol. 16B, pp. 841–46.10.1007/BF02667521 ↗
8. N. El-Kaddah, M. Arenas, and V.L. Acoff: 2nd Int. Conf. on CFD in the Minerals and Process Industries, M.P. Schwarz, M.R. Davidson, A.K. Easton, P.J. Witt, and M.L. Sawley, eds., CSIRO, Melbourne, 1999, pp. 417–22.
9. M. Arenas, V.L. Acoff, and N. El-Kaddah: in Mathematical Modelling of Weld Phenomena 5, H. Cerjak, ed., IOM Communications Ltd., Oxford, UK, 2001, pp. 39–53.
10. M. Arenas, V.L. Acoff, and N. El-Kaddah: in Joining of Advanced and Specialty Materials III, M. Singh, J. Indacochea, J. DuPont, and T. Lienert, eds., ASM INTERNATIONAL, Materials Park, OH, 2001, pp. 142–47.
11. M. Arenas, V.L. Acoff, and N. El-Kaddah: in Fluid Flow Phenomena in Metal Processing, N. El-Kaddah, D.G.C. Robertson, S.T. Johansen, and V.R. Voller, eds., TMS, Warrendale, PA, 1999, pp. 485–91.
12. W.F. Hughes and F.J. Young: The Electromagnetodynamics of Fluids, John Wiley & Sons, New York, NY, 1966.
13. J. McKelliget and J. Szekely: Metall. Trans. A, 1986, vol. 17A, pp. 1139–48.10.1007/BF02665312 ↗
14. S.V. Patankar: Numerical Heat Transfer and Fluid Flow, McGraw-Hill Book Company, New York, NY, 1980.
15. B. Li, X. Liang, J.C. Earthman, and E.J. Lavernia: Acta Mater., 1996, vol. 44, pp. 2409–20.10.1016/1359-6454(95)00335-5 ↗