Influence of Subsurface Structure on the Linear Reciprocating Sliding Wear Behavior of Steels with Different Microstructures
Source abstract
Abstract
The present work investigates the influence of subsurface microstructure on the linear reciprocating sliding wear behavior of a number of steels with ferrite-pearlitic, pearlitic, bainitic, and martensitic microstructures under dry unlubricated condition. The change in the underlying microstructure with depth from worn-out surface of steel sample intimately relates to the associated hardness variation and wear volume. The present paper is not about comparison of wear resistance of steels with different structures; rather it is on mutual influence of wear and substructure for individual microstructure. Inherent toughness of the matrix and ability of microstructural components to get deformed under the reciprocating action of the ball decide the wear resistance of the steels. Bainite has good amount of stability to plastic deformation. Ferrite shows severe banding due to wear action. Work hardening renders pearlite to be wear resistant. Temperature rise and associated tempering of martensite are observed during wear.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Mechanical stress and fatigue analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. P. L. Hurricks: Wear, 1973, vol. 26, pp. 285–304.10.1016/0043-1648(73)90184-1 ↗
2. A. Aglan Heshmat, Fateh Mahmoo: J Mechanics Mater. Struct., 2007, vol. 2, pp. 335-46.10.2140/jomms.2007.2.335 ↗
3. Yu. Ivanisenko, W Lojkowski, RZ Valiev, HJ Fecht: Acta Mater., 2003, vol. 51, pp. 5555-70.10.1016/S1359-6454(03)00419-1 ↗
4. D. A. Rigney, W.A. Glaeser: Wear, 1978, vol. 46, pp. 241-50.10.1016/0043-1648(78)90125-4 ↗
5. A. Matsuzaki, H.K.D.H. Bhadeshia and H. Harada, Acta Metall. Mater., 1994, vol. 42, pp. 1081-1090.10.1016/0956-7151(94)90125-2 ↗
6. Yu. Ivanisenko, W. Lojkowski, R. Z. Valiev, H. -J. Fetch, Acta mater., 2003, vol. 51, pp. 5555-5570.10.1016/S1359-6454(03)00419-1 ↗
7. H.K.D.H. Bhadeshia: in Possible Effects of Stress on Steel Weld Microstructures, H. Cerjak and H.K.D.H. Bhadeshia, eds., Institute of Materials, London, 1995, pp. 71–118.
8. Young-Ho Lee and In-Sup Kim, Wear, 2002, vol. 253, pp. 438-447.10.1016/S0043-1648(02)00157-6 ↗
9. D. A. Rigney, R. Divakar, S. M. Kuo, Scripta Metall. Mater., 1992, vol. 27, pp. 975–980.10.1016/0956-716X(92)90459-R ↗
10. M. A. Moore, R.M. Douthwaite, Metall. Trans. A, 1976, vol. 7, pp. 1833–1839.10.1007/BF02659813 ↗
11. S. Y. Tarassov, A.V. Kolubaev, Wear, 1999, vol. 231, pp. 228–234.10.1016/S0043-1648(99)00107-6 ↗
12. S. M. Shariff, T. K. Pal, G. Padmanabham and S. V. Joshi, J. Tribo., 2011, vol. 133, pp. 1-9.10.1115/1.4003485 ↗
13. P. Clayton and X. Su, Wear, 1996, vol. 200, pp. 63-73.10.1016/S0043-1648(96)07250-X ↗
14. Kapoor, F. J. Franklin, S. K. Wong, M. Ishida, Wear, 2002, vol. 253, pp. 257-264.10.1016/S0043-1648(02)00111-4 ↗
15. S Basavarajappa, G Chandramohan, A. Mahadevan, M. Thangavelu, R. Subramanian, P. Gopalkrishnan, Wear, 2007, vol. 262, pp. 1007–1012.10.1016/j.wear.2006.10.016 ↗
16. K. L. Jhonson, J. Mech. Engg. Sci., 1989, vol. 203, pp. 151-163.10.1243/PIME_PROC_1989_203_100_02 ↗
17. K. M. Lee, A. Polycarpou, Wear, 2005, vol. 259, pp. 391-99.10.1016/j.wear.2005.02.058 ↗
18. P. H. Shipway, S. J. Wood, A. H. Dent: Wear, 1997, vols. 203-204, pp. 196-205.10.1016/S0043-1648(96)07411-X ↗
19. K. Madler, A. Zoll, R. Heyder, and M. Brehmer: OPTIKON, A composite project funded by the German Transport Ministry, 1998–2001.
20. J. E. Garnham, J. H. Baynon: Wear, 1992, vol. 157, pp. 81-109.10.1016/0043-1648(92)90189-F ↗
21. P. Clayton, K. J. Sawley, P. J. Bolton, G.M. Pell: Wear, 1987, vol. 120, pp. 199-220.10.1016/0043-1648(87)90067-6 ↗
22. V. I. Semenov, L. Sh. Shuster, S. J. Huang, P. Ch. Lin: J. Friction Wear, 2011, vol. 32, pp. 205-11.10.3103/S106836661103010X ↗
23. S. B. Wesley, H. S. Goyal, A. P. Harsha: J. Eng. Tribology, 2012, vol. 226, pp. 163-73.
24. R. Tyagi, S. K. Nath, S. Ray: Metall. Mater. Trans. A A, 2002, vol. 33, pp. 3479-88.10.1007/s11661-002-0335-7 ↗
25. J. Larsen-Badse: Trans AIME, 1966, vol. 236, pp. 1461-66.
26. D. J. Gaul, D. J. Duquette: Metall. Trans. A, 1980, vol. 11, pp. 1581-88.10.1007/BF02654522 ↗
27. N. Jin, P. Clayton: Wear, 1997, vol. 202, pp. 202-07.10.1016/S0043-1648(96)07271-7 ↗
28. W. R. Tyfour, J. H. Beynon, A. Kapoor: Wear, 1995, vol. 180, pp. 79-89.10.1016/0043-1648(94)06533-0 ↗
29. J. Kalousek, D. M. Fegredo, E.E. Laufer: Wear, 1985, vol. 105, pp. 199-222.10.1016/0043-1648(85)90068-7 ↗
30. P. Clayton, R. Devanathan, N. Jin, R.K. Steele: Rail Quality and Maintenance for Modern Railway Operation, Kluwer Academic Publishers, Netherlands, 1993, pp. 41–51.10.1007/978-94-015-8151-6_4 ↗
31. Indian Railway Standard Specification for Flat Bottom Railway Rails, Research Design and Standards Organization, Lucknow. Serial no.T-12-96.
32. H.K.D.H. Bhadeshia, Teaching Materials, http://www.msm.cam.ac.uk/phase-trans/teaching.html.
33. K.W. Andrews: JISI, 1965, vol. 203, pp. 721-23.
34. Z. Zhao, C. Cheng, Y. Liu, D.O. Northwood: J. Mater. Sci., 2001, vol. 36, pp. 5045-56.10.1023/A:1011874708194 ↗
35. B. Basu, J. Sarkar, and R. Mishra: Metall. Mater. Trans. A, 2009, vol. 40, pp. 472-80.10.1007/s11661-008-9721-0 ↗
36. S. Sharma, S. Sangal, K. Mondal: Wear, 2013, vol. 300, 82-89.10.1016/j.wear.2013.01.107 ↗
37. C. Garcia-Mateo, F. G. Caballero, M. K. Miller, J. A. Jimenez: J. Mater. Sci., 2012, vol. 47, pp. 1004-10.10.1007/s10853-011-5880-2 ↗
38. A. Misra, S. Sharma, S. Sangal, A. Upadhyaya, K. Mondal: Mater. Sci. Eng. A, 2012, vol. 558, pp. 725-29.10.1016/j.msea.2012.08.083 ↗
39. G. Krauss: Mater. Sci. Eng. A, 1999, vols. 273-275, pp. 40-57.10.1016/S0921-5093(99)00288-9 ↗
40. S. Sharma, S. Sangal, K. Mondal: Metall. Mater. Trans. A, 2011. Vol. 42, pp. 3921-33.10.1007/s11661-011-0797-6 ↗
41. F. G. Caballero, H.K.D.H. Bhadeshia, K.J.A. Mawella, D.G. Jones, P. Brown: Mater. Sci. Tech.,2001, vol. 17, pp. 517-22.10.1179/026708301101510357 ↗
42. J. F. Archard, Wear Handbook, ASME, New York (1980).
43. P. J. Humphreys, M. Hatherly: Recrystallization and Related Annealing Phenomena, Pergamon press, London, 1996.
44. M. Gensamer, E. B. Pearsall, W. S. Pellini, J. R. Low, Metallogrph. Microstruct. Anall., 2012, vol. 1, pp. 171-89.10.1007/s13632-012-0027-7 ↗
45. H.I. Yokoyam, Shin JiMitao, SadahIro Yamamo, Yuzuru Kataoka, Toru Sugiyama: NKK Technical Rev.,2001, vol. 84, pp. 44-51.
46. H.K.D.H. Bhadeshia, R.W.K. Honeycombe, Steels Microstructure and Properties, Butterworth-Heinemann publishers, Oxford, 3rd edition, 2006.
47. A. Barbacki: J. Mater. Proc. Tech.,1995, vol. 53, pp. 57-63.10.1016/0924-0136(95)01961-D ↗
48. E. Hornbogen: Wear, 1975, vol. 33, pp. 251-59.10.1016/0043-1648(75)90280-X ↗
49. S. Kapoor, R. Liu, X.J. Wu, M. X. Yao: World Academy of Science, Engineering and Technology, 2012, vol. 67, pp. 964-73.
50. S. C. Lim and M. F. Ashby: Acta Metall., 1987, vol. 35, pp. 1-24.10.1016/0001-6160(87)90209-4 ↗
51. J. F. Archard: Wear, 1958, vol. 2, pp. 438-55.10.1016/0043-1648(59)90159-0 ↗
52. M. F. Ashby, J. Abulawi, H.S. Kong: Tribo. Trans., 1991, vol. 34, pp. 577-87.10.1080/10402009108982074 ↗
53. I. M. Hutchings, Friction and Wear of Engineering Materials, Butterworth Heinemann, Oxford 1992.
54. Rabinowicz, Friction and Wear of Materials, Wiley, New York, 1965.