journal article·2003-11

Synergetic effect of hardness and phosphorus grain-boundary segregation on the ductile-to-brittle transition temperature of 17-4 PH steel

F. Christien, R. Le Gall, G. Saindrenan

Publisher page

Abstract

The influence of hardness and phosphorus grain-boundary segregation (PGBS) on the ductile-to-brittle transition temperature (DBTT) of a 17-4 PH martensitic steel was studied. Thermal treatments including long-time aging at low temperature were made to get different hardness levels and different PGBS amounts. A synergetic effect between PGBS and hardness on the DBTT of the steel is evidenced; in other words, the DBTT shift due to PGBS increases with hardness. If hardness is low enough, PGBS can even have no effect on the DBTT. A tentative interpretation of this synergetic effect is proposed, based on the assumption that the detrimental effect of PGBS on the grain-boundary cohesion increases with temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. G.E. Dieter: Mechanical Metallurgy, 2nd ed., McGraw-Hill Book Co., London, 1988, pp. 470–500.
2. M. Guttmann: Phil. Trans. R. Soc. London A, 1980, vol. 295A, pp. 169–96.10.1098/rsta.1980.0099 ↗
3. R.A. Mulford, C.J. McMahon, D.P. Pope, and H.C. Feng: Metall. Trans. A, 1976, vol. 7A, pp. 1183–95.10.1007/BF02656602 ↗
4. S. Takayama, T. Ogura, Shin-Cheng Fu, and C.J. McMahon, Jr: Metall. Trans. A, 1980, vol. 11A, pp. 1513–30.10.1007/BF02654515 ↗
5. M. Murayama, Y. Katayama, and K. Hono: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 345–53.10.1007/s11661-999-0323-2 ↗
6. F. Christien, R. Le Gall, and G. Saindrenan: Scripta Mater., 2003, vol. 48, pp. 11–17.10.1016/S1359-6462(02)00309-3 ↗
7. M. Guttmann: Thèse de doctorat d’état, Université de Paris XI, Orsay, France, 1974, pp. 215–27.
8. M. Guttmann and P.R. Krahe: C.R. Acad. Sci. Paris, 1971, vol. 237C, pp. 1227–36.
9. G.E. Dieter: Mechanical Metallurgy, 2nd ed., McGraw-Hill Book Co., London, 1988, pp. 241–72.
10. G. Saindrenan, R. Le Gall, and F. Christien: Endommagement Interfacial des Métaux, Edition Ellipses, Paris, 2002, pp. 188–91.
11. J.P. Hirth and J.R. Rice: Metall. Trans. A, 1980, vol. 11, pp. 1501–11.10.1007/BF02654514 ↗
12. H. Erhart and H.J. Grabke: Met. Sci., 1981, vol. 15, pp. 401–08.10.1016/0036-9748(81)90197-6 ↗
13. P. Lejček, S Hofmann, and A. Krajnikov: Mater. Sci. Eng. A, 1997, vol. 234, pp. 283–86.10.1016/S0921-5093(97)00239-6 ↗
14. M.L. Jokl, V. Vitek, and C.J. McMahon, Jr.: Acta Metall., 1980, vol. 28, pp. 1479–88.10.1016/0001-6160(80)90048-6 ↗
15. C. Naudin, J.M. Frund, and A. Pineau: Scripta Mater., 1999, vol. 40, pp. 1013–19.10.1016/S1359-6462(99)00069-X ↗
16. F. Grimpe, J. Heyer, and W. Dahl: Nucl. Eng. Design, 1999, vol. 188, pp. 155–60.10.1016/S0029-5493(99)00012-6 ↗