journal article·2009-07

A Study of the Fundamental Relationships between Deformation-Induced Surface Roughness and Strain Localization in AA5754

M.R. Stoudt, J.B. Hubbard, M.A. Iadicola, S.W. Banovic

Publisher page

Abstract

Three-dimensional, matrix-based statistical analysis methods were developed and integrated with high-resolution topographical imaging, to assess how microstructural changes influence the evolution of plastic deformation and strain localization in a commercial AA5754-O aluminum sheet in three in-plane strain modes. Analysis of the raw surface data revealed that the general composition of the surface roughness was highly sensitive to strain mode and strain level. The microstructural conditions that promote strain localization were assessed by extending a profile-based surface roughness parameter (Rt) to matrix form. Both analyses revealed that different strain modes produce characteristic dissimilarities in the deformation at the grain level. The localization data can be well characterized with a two-parameter Weibull distribution, suggesting that strain localization is a stochastic process that can be modeled reliably with Weibull statistics. This study clearly demonstrates that an accurate and straightforward probabilistic expression that captures the microstructural subtleties produced by plastic deformation can be developed from rigorous analyses of raw topographic data. Because variations in surface morphology profoundly influence the reliability of the numerical models used to predict strain localization, incorporating expressions of this type could greatly enhance the accuracy of these models.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Non-Destructive Testing Techniques · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. T. Foecke, M.A. Iadicola, A. Lin, and S.W. Banovic: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 306–13.10.1007/s11661-006-9044-y ↗
2. T. Pardoen and Y. Brechet: Philos. Mag., 2004, vol. 84, pp. 269–97.10.1080/14786430310001610366 ↗
3. Z. Marciniak and K. Kuczynski: Int. J. Mech. Sci., 1967, vol. 9, pp. 609–20.10.1016/0020-7403(67)90066-5 ↗
4. J.E. Bird and J.L. Duncan: Metall. Trans. A, 1981, vol. 12A, pp. 235–41.10.1007/BF02655196 ↗
5. F. Barlat, R.C. Becker, Y. Hayashida, Y. Maeda, M. Yanagawa, K. Chung, J.C. Brem, D.J. Lege, K. Matsui, S.J. Murtha, and S. Hattori: Int. J. Plast., 1997, vol. 13, pp. 385–401.10.1016/S0749-6419(97)80005-8 ↗
6. A.J. Beaudoin, A. Acharya, S.R. Chen, D.A. Korzekwa, and M.G. Stout: Acta Mater., 2000, vol. 48, pp. 3409–23.10.1016/S1359-6454(00)00136-1 ↗
7. D. Rabbe, M. Sachtleber, H. Weiland, G. Scheele, and Z. Zhao: Acta Mater., 2003, vol. 51, pp. 1539–60.10.1016/S1359-6454(02)00557-8 ↗
8. R. Becker and O. Richmond: Modell. Simul. Mater. Sci. Eng., 1994, vol. 2, pp. 439–54.10.1088/0965-0393/2/3A/002 ↗
9. H.A. Al-Quershi, A.N. Klein, and M.C. Fredel: J. Mater. Proc. Technol., 2005, vol. 170, pp. 204–10.10.1016/j.jmatprotec.2005.04.116 ↗
10. J. Savoie, M. Jain, A.R. Carr, P.D. Wu, K.W. Neale, Y. Zhou, and J.J. Jonas: Mater. Sci. Eng., A, 1998, vol. A257, pp. 128–33.10.1016/S0921-5093(98)00830-2 ↗
11. P.D. Wu, D.J. Lloyd, M. Jain, K.W. Neale, and Y. Huang: Int. J. Plast., 2007, vol. 23, pp. 1084–1104.10.1016/j.ijplas.2006.11.005 ↗
12. W.B. Lievers, A.K. Pilkey, and D.J. Lloyd: Acta Mater., 2004, vol. 52, pp. 3001–07.10.1016/j.actamat.2004.03.002 ↗
13. M.R. Stoudt and J.B. Hubbard: Acta Mater., 2005, vol. 53, pp. 4293–4304.10.1016/j.actamat.2005.05.038 ↗
14. R. Becker: Acta Mater., 1998, vol. 46, pp. 1385–1401.10.1016/S1359-6454(97)00182-1 ↗
15. Z. Zhao, R. Radovitzky, and A. Cuitino: Acta Mater., 2004, vol. 52, pp. 5791–5804.10.1016/j.actamat.2004.08.037 ↗
16. K. Osakada and M. Oyane: Bull. JSME, 1971, vol. 14, pp. 171–77.10.1299/jsme1958.14.171 ↗
17. M.R. Stoudt, J.B. Hubbard, and S.A. Janet: Mater. Sci. Technol., 2008, vol. 24, pp. 253–60.10.1179/174328407X236562 ↗
18. M. Cai, M.R. Stoudt, L.E. Levine, and J.T. Dickinson: Philos. Mag., 2007, vol. 87, pp. 907–24.10.1080/14786430601003882 ↗
19. H.J. Frost and M.F. Ashby: Deformation-Mechanism Maps: The Plasticity and Creep of Metals and Ceramics, Pergamon Press, Oxford, United Kingdom, 1982.
20. G.W. Greenwood: Mater. Sci. Eng., A, 2005, vols. 410–411, pp. 12–15.10.1016/j.msea.2005.08.098 ↗
21. F.A. Mohamed and T.G. Langdon: Metall. Trans., 1974, vol. 5, pp. 2339–45.10.1007/BF02644014 ↗
22. S.W. Banovic, M.A. Iadicola, and T. Foecke: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2246–58.10.1007/s11661-008-9547-9 ↗
23. M.A. Iadicola, T. Foecke, and S.W. Banovic: Int. J. Plast., 2008, vol. 24, pp. 2084–2101.10.1016/j.ijplas.2008.03.003 ↗
24. A.H. Cottrell: Philos. Mag., 1953, vol. 44, pp. 829–32.10.1080/14786440808520347 ↗
25. L.P. Kubin and Y. Estrin: Acta Metall. Mater., 1990, vol. 38, pp. 697–708.10.1016/0956-7151(90)90021-8 ↗
26. P.G. McCormick: Acta Metall., 1971, vol. 19, pp. 463–71.10.1016/0001-6160(71)90170-2 ↗
27. Anonymous: Aluminum Standards and Data 2003, The Aluminum Association, Washington, DC, 2003.
28. G.F. VanderVoort: Metallography Principles and Practice, ASM INTERNATIONAL, Materials Park, OH, 1999.
29. Anonymous: 1993 Annual Book of ASTM Standards, Section 3, Metals Test Methods and Analytical Procedures, ASTM, Philadelphia, PA, 1993.
30. K.S. Raghavan: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2075–84.10.1007/BF02670679 ↗
31. G.E. Dieter: Mechanical Metallurgy, McGraw-Hill, New York, NY, 1986.
32. J.B. Hubbard, M.R. Stoudt, and L.E. Levine: J. Appl. Phys., 2007, vol. 102, pp. 1–10.10.1063/1.2757010 ↗
33. M.R. Stoudt, J.B. Hubbard, S.P. Mates, and D.E. Green: SAE Trans. J. Mater. Manuf., 2006, vols. 114–115, pp. 183–90.
34. Anonymous: ASME Designation B46.1-2002: Surface Texture (Surface Roughness, Waviness and Lay), ASME, New York, NY, 2002.
35. J. Dattorro: Convex Optimization & Euclidean Distance Geometry, MeBoo Publishing, Palo Alto, CA, 2005, pp. 219–314.
36. S. Kotz: Extreme Value Distributions: Theory and Applications, Imperial College Press, London, 2002.
37. N. Balakrishnan and V.B. Nevzorov: A Primer on Statistical Distributions, J. Wiley & Sons, Hoboken, NJ, 2003.10.1002/0471722227 ↗
38. J. Galambos, J. Lechner, and E. Simiu: Extreme Value Theory and Applications, Kluwer Academic Publishers, Dordrecht, The Netherlands, 1994.10.1007/978-1-4613-3638-9 ↗
39. W. Weibull: J. Appl. Mech., 1951, vol. 18, pp. 293–97.10.1115/1.4010337 ↗
40. J.E. Shigley and C.R. Mischke: Mechanical Engineering Design, McGraw-Hill, New York, NY, 1989, pp. 165–71.
41. K.C. Kapur: Reliability in Engineering Design, Wiley, New York, NY, 1977.
42. Anonymous: Weibull Distribution, Wikipedia, The Free Encyclopedia, 2008.
43. MATLAB version 7.4 (R2007a), The MathWorks. Inc, Natick, MA, 2007.10.1109/MCAS.2007.329167 ↗
44. E.J. Moore: Doctoral Dissertation, University of Maryland, Baltimore County, MD, 2006.
45. E.J. Moore, M.R. Stoudt, and R.C. Reno: TMS Lett., 2005, vol. 2, pp. 135–36.
46. G.I. Taylor: J. Inst. Met., 1938, vol. 62, pp. 307–24.
47. M.R. Stoudt and R.E. Ricker: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2883–89.10.1007/s11661-002-0273-4 ↗
48. M.F. Ashby: Philos. Mag., 1970, vol. 21, pp. 399–424.10.1080/14786437008238426 ↗
49. J.D. Kang, D.S. Wilkinson, J.D. Embury, M. Jain, and A.J. Beaudoin: Scripta Mater., 2005, vol. 53, pp. 499–503.10.1016/j.scriptamat.2005.05.010 ↗
50. A. Inagaki, T. Komatsubara, and H. Inagaki: Z. Metallkd., 1999, vol. 90, pp. 427–33.
51. P.J. Worthington and B.J. Brindley: Philos. Mag., 1969, vol. 19, pp. 1175–78.10.1080/14786436908228642 ↗
52. H. Halim, D.S. Wilkinson, and M. Niewczas: Acta Mater., 2007, vol. 55, pp. 4151–60.10.1016/j.actamat.2007.03.007 ↗
53. J.M. Robinson: Int. Mater. Rev., 1994, vol. 39, pp. 217–27.10.1179/imr.1994.39.6.217 ↗
54. M. Li and D.J. Lege: J. Eng. Mater. Technol., 1998, vol. 120, pp. 48–56.10.1115/1.2806837 ↗