Understanding the Problem of Fatigue in Bulk Metallic Glasses
Source abstract
Abstract
Early studies suggested there was a severe problem with the fatigue resistance of some bulk metallic glasses (BMGs) and BMG matrix composites, while more recent studies begin to demonstrate a wide variety of fatigue behaviors may be possible for both fully amorphous BMGs and their composites. However, in order to truly understand and control the fatigue behavior of these materials, the role of such factors as thermomechanical processing, the corresponding glass structure, environment, and defects must be understood. Additionally, it is important to understand how these factors relate to the mechanisms of fatigue. This article reviews the current understanding in this regard, and identifies some of the challenges for the future development of fatigue-resistant BMG-based materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Electromagnetic wave absorption materials · Glass properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. C.J. Byrne and M. Eldrup: Science, 2008, vol. 321, pp. 502–03.10.1126/science.1158864 ↗
2. M.F. Ashby and A.L. Greer: Scripta Mater., 2006, vol. 54, pp. 321–26.10.1016/j.scriptamat.2005.09.051 ↗
3. J.J. Lewandowski, W.H. Wang, and A.L. Greer: Phil. Mag. Lett., 2005, vol. 85, pp. 77–87.10.1080/09500830500080474 ↗
4. J. Schroers: JOM, 2005, vol. 57, pp. 35–39.10.1007/s11837-005-0093-2 ↗
5. C.J. Gilbert, J.M. Lippmann, and R.O. Ritchie: Scripta Mater., 1998, vol. 38, pp. 537–42.10.1016/S1359-6462(97)00522-8 ↗
6. M.E. Launey, R. Busch, and J.J. Kruzic: Scripta Mater., 2006, vol. 54, pp. 483–87.
7. G.Y. Wang, P.K. Liaw, A. Peker, B. Yang, M.L. Benson, W. Yuan, W.H. Peter, L. Huang, M. Freels, R.A. Buchanan, C.T. Liu, and C.R. Brooks: Intermetallics, 2005, vol. 13, pp. 429–35.10.1016/j.intermet.2004.07.037 ↗
8. B.C. Menzel and R.H. Dauskardt: Scripta Mater., 2006, vol. 55, pp. 601–04.10.1016/j.scriptamat.2006.06.015 ↗
9. G.Y. Wang, P.K. Liaw, and M.L. Morrison: Intermetallics, 2009, vol. 17, pp. 579–90.10.1016/j.intermet.2009.01.017 ↗
10. K.M. Flores, W.L. Johnson, and R.H. Dauskardt: Scripta Mater., 2003, vol. 49, pp. 1181–87.10.1016/j.scriptamat.2003.08.020 ↗
11. M.E. Launey, D.C. Hofmann, W.L. Johnson, and R.O. Ritchie: Proc. Nat. Acad. Sci. Univ. S.A., 2009, vol. 106, pp. 4986–91.10.1073/pnas.0900740106 ↗
12. K. Boopathy, D.C. Hofmann, W.L. Johnson, and U. Ramamurty: J. Mater. Res., 2009, vol. 24, pp. 3611–19.10.1557/jmr.2009.0439 ↗
13. M.E. Launey, R. Busch, and J.J. Kruzic: Acta Mater., 2008, vol. 56, pp. 500–10.10.1016/j.actamat.2007.10.007 ↗
14. M. Liu, R.S. Vallery, D.W. Gidley, M.E. Launey, and J.J. Kruzic: J. Appl. Phys., 2009, vol. 105, 093501.10.1063/1.3120784 ↗
15. R.S. Vallery, M. Liu, D.W. Gidley, M.E. Launey, and J.J. Kruzic: Appl. Phys. Lett., 2007, vol. 91, 261908.10.1063/1.2825427 ↗
16. A.B. El-Shabasy and J.J. Lewandowski: Scripta Mater., 2010, vol. 62, pp. 481–84.10.1016/j.scriptamat.2009.12.016 ↗
17. R. Raghavan, R. Ayer, H.W. Jin, C.N. Marzinsky, and U. Ramamurty: Scripta Mater., 2008, vol. 59, pp. 167–70.10.1016/j.scriptamat.2008.03.009 ↗
18. C.E. Packard, L.M. Witmer, and C.A. Schuh: Appl. Phys. Lett., 2008, vol. 92, 171911.10.1063/1.2919722 ↗
19. S.L. Philo and J.J. Kruzic: Scripta Mater., 2010, vol. 62, pp. 473–76.10.1016/j.scriptamat.2009.12.014 ↗
20. V. Schroeder, C.J. Gilbert, and R.O. Ritchie: Scripta Mater., 1999, vol. 40, pp. 1057–61.10.1016/S1359-6462(99)00067-6 ↗
21. V. Schroeder, C.J. Gilbert, and R.O. Ritchie: Mater. Sci. Eng. A, 2001, vol. 317, pp. 145–52.10.1016/S0921-5093(01)01157-1 ↗
22. V. Schroeder and R.O. Ritchie: Acta Mater., 2006, vol. 54, pp. 1785–94.10.1016/j.actamat.2005.12.006 ↗
23. P.A. Hess, B.C. Menzel, and R.H. Dauskardt: Scripta Mater., 2006, vol. 54, pp. 355–61.10.1016/j.scriptamat.2005.10.007 ↗
24. B.C. Menzel and R.H. Dauskardt: Acta Mater., 2008, vol. 56, pp. 2955–65.10.1016/j.actamat.2008.02.029 ↗
25. B.C. Menzel and R.H. Dauskardt: Acta Mater., 2006, vol. 54, pp. 935–43.10.1016/j.actamat.2005.10.021 ↗
26. D. Suh and R.H. Dauskardt: Scripta Mater., 2000, vol. 42, pp. 233–40.10.1016/S1359-6462(99)00337-1 ↗
27. D. Suh and R.H. Dauskardt: Mater. Sci. Eng. A, 2001, vols. A319–A321, pp. 480–83.10.1016/S0921-5093(01)00992-3 ↗
28. P. Murah and U. Ramamurty: Acta Mater., 2005, vol. 53, pp. 1467–78.10.1016/j.actamat.2004.11.040 ↗
29. F. Spaepen: Acta Metall., 1977, vol. 25, pp. 407–15.10.1016/0001-6160(77)90232-2 ↗
30. P.S. Steif, F. Spaepen, and J.W. Hutchinson: Acta Metall., 1982, vol. 30, pp. 447–55.10.1016/0001-6160(82)90225-5 ↗
31. A.S. Argon: Acta Metall., 1979, vol. 27, pp. 47–58.10.1016/0001-6160(79)90055-5 ↗
32. D. Suh and R.H. Dauskardt: J. Non-Cryst. Solids, 2003, vol. 317, pp. 181–86.10.1016/S0022-3093(02)01997-X ↗
33. R. Gerling, F.P. Schimansky, and R. Wagner: Acta Metall., 1988, vol. 36, pp. 575–83.10.1016/0001-6160(88)90090-9 ↗
34. M.E. Launey, J.J. Kruzic, C. Li, and R. Busch: Appl. Phys. Lett., 2007, vol. 91, 051913.10.1063/1.2766659 ↗
35. Y. Yokoyama, P.K. Liaw, M. Nishijima, K. Hiraga, R.A. Buchanan, and A. Inoue: Mater. Trans., 2006, vol. 47, pp. 1286–93.10.2320/matertrans.47.1286 ↗
36. K.M. Flores, E. Sherer, A. Bharathula, H. Chen, and Y.C. Jean: Acta Mater., 2007, vol. 55, pp. 3403–11.10.1016/j.actamat.2007.01.040 ↗
37. Y.Q. Cheng and E. Ma: Appl. Phys. Lett., 2008, vol. 93, p. 3.
38. Y.Q. Cheng, A.J. Cao, H.W. Sheng, and E. Ma: Acta Mater., 2008, vol. 56, pp. 5263–75.10.1016/j.actamat.2008.07.011 ↗
39. D.B. Miracle, T. Egami, K.M. Flores, and K.F. Kelton: MRS Bull., 2007, vol. 32, pp. 629–34.10.1557/mrs2007.124 ↗
40. C.C. Aydiner and E. Ustundag: Mech. Mater., 2005, vol. 37, pp. 201–12.10.1016/j.mechmat.2004.03.001 ↗
41. C.C. Aydiner, E. Ustundag, M.B. Prime, and A. Peker: J. Non-Cryst. Solids, 2003, vol. 316, pp. 82–95.10.1016/S0022-3093(02)01940-3 ↗
42. Y. Zhang, W.H. Wang, and A.L. Greer: Nature Mater., 2006, vol. 5, pp. 857–60.10.1038/nmat1758 ↗
43. F. Spaepen: Acta Metall., 1977, vol. 25, pp. 407–15.10.1016/0001-6160(77)90232-2 ↗
44. C.J. Gilbert, V. Schroeder, and R.O. Ritchie: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1739–53.10.1007/s11661-999-0173-y ↗
45. S. Suresh: Fatigue of Materials, 2nd ed., Cambridge University Press, Cambridge, United Kingdom, 1998, pp. 577–581.10.1017/CBO9780511806575 ↗
46. R.P. Gangloff: in Environment-Induced Cracking of Metals, R.P. Gangloff and M.B. Ives, eds., National Association of Corrosin Engineers, Houston TX, 1990, pp. 55–109.
47. A.J. McEvily and R.P. Wei: in Corrosion Fatigue: Chemistry, Mechanics and Microstructure, O. Devereux, A.J. McEvily, and R.W. Staehle, eds., National Association of Corrosion Engineers, Houston, TX, 1972, pp. 381–95.
48. S.L. Philo, J. Heinrich, I. Gallino, R. Busch, and J.J. Kruzic, unpublished research, 2010.
49. G.Y. Wang, P.K. Liaw, W.H. Peter, B. Yang, Y. Yokoyama, M.L. Benson, B.A. Green, M.J. Kirkham, S.A. White, T.A. Saleh, R.L. McDaniels, R.V. Steward, R.A. Buchanan, C.T. Liu, and C.R. Brooks: Intermetallics, 2004, vol. 12, pp. 885–92.10.1016/j.intermet.2004.02.043 ↗
50. C.J. Gilbert, R.O. Ritchie, and W.L. Johnson: Appl. Phys. Lett., 1997, vol. 71, pp. 476–78.10.1063/1.119610 ↗
51. D.L. Cocke, G. Liang, M. Owens, D.E. Halverson, and D.G. Naugle: Mater. Sci. Eng., 1988, vol. 99, pp. 497–500.10.1016/0025-5416(88)90384-9 ↗
52. N. Eliaz and D. Eliezer: Adv. Perform. Mater., 1999, vol. 6, pp. 5–31.10.1023/A:1008748627295 ↗
53. G.G. Libowitz and A.J. Maeland: J. Less-Common Met., 1984, vol. 101, pp. 131–43.10.1016/0022-5088(84)90091-2 ↗
54. L. Liu, C.L. Qiu, Q. Chen, K.C. Chan, and S.M. Zhang: J. Biomedical Mater. Res. Part A, 2008, vol. 86A, pp. 160–69.10.1002/jbm.a.31425 ↗
55. J.R. Scully, A. Gebert, and J.H. Payer: J. Mater. Res., 2007, vol. 22, pp. 302–13.10.1557/jmr.2007.0051 ↗
56. B. Walz, P. Oelhafen, H.J. Guntherodt, and A. Baiker: Appl. Surf. Sci., 1989, vol. 37, pp. 337–52.10.1016/0169-4332(89)90495-9 ↗
57. H.M. Kimura, K. Asami, A. Inoue, and T. Masumoto: Corr. Sci., 1993, vol. 35, pp. 909–915.10.1016/0010-938X(93)90308-4 ↗
58. U. Köster and L. Jastrow: Mater. Sci. Eng. A, 2007, vol. 449A, pp. 57–62.10.1016/j.msea.2006.02.316 ↗
59. C.T. Liu, L. Heatherly, D.S. Easton, C.A. Carmichael, J.H. Schneibel, C.H. Chen, J.L. Wright, M.H. Yoo, J.A. Horton, and A. Inoue: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1811–20.10.1007/s11661-998-0004-6 ↗
60. S.K. Sharma, T. Strunskus, H. Ladebusch, and F. Faupel: Mater. Sci. Eng. A, 2001, vol. 304, pp. 747–52.10.1016/S0921-5093(00)01586-0 ↗
61. M.L. Morrison, R.A. Buchanan, P.K. Liaw, B.A. Green, G.Y. Wang, C.T. Liu, and J.A. Horton: Mater. Sci. Eng. A, 2007, vol. 467, pp. 198–206.10.1016/j.msea.2007.03.106 ↗
62. M.L. Morrison, R.A. Buchanan, P.K. Liaw, B.A. Green, G.Y. Wang, C. Liu, and J.A. Horton: Mater. Sci. Eng. A, 2007, vol. 467, pp. 190–97.10.1016/j.msea.2007.05.066 ↗
63. H.M. Chiu, G. Kumar, J. Blawzdziewicz, and J. Schroers: Scripta Mater., 2009, vol. 61, pp. 28–31.10.1016/j.scriptamat.2009.02.052 ↗
64. G. Kumar, H.X. Tang, and J. Schroers: Nature, 2009, vol. 457, pp. 868–72.10.1038/nature07718 ↗
65. R. Martinez, G. Kumar, and J. Schroers: Scripta Mater., 2008, vol. 59, pp. 187–90.10.1016/j.scriptamat.2008.03.008 ↗
66. J. Schroers, Q. Pham, A. Peker, N. Paton, and R.V. Curtis: Scripta Mater., 2007, vol. 57, pp. 341–44.10.1016/j.scriptamat.2007.04.033 ↗
67. M.D. Demetriou, C. Veazey, J. Schroers, J.C. Hanan, and W.L. Johnson: J. Alloys Compds., 2007, vol. 434, pp. 92–96.10.1016/j.jallcom.2006.08.323 ↗
68. K.M. Flores, D. Suh, R.H. Dauskardt, P. Asoka-Kumar, P.A. Sterne, and R.H. Howell: J. Mater. Res., 2002, vol. 17, pp. 1153–61.10.1557/JMR.2002.0171 ↗
69. S.O. Hruszkewycz, T. Fujita, M.W. Chen, and T.C. Hufnagel: Scripta Mater., 2008, vol. 58, pp. 303–06.10.1016/j.scriptamat.2007.10.009 ↗