The Role of Mechanically Activated Area on Tribocorrosion of CoCrMo
Source abstract
Abstract
Co-Cr-Mo alloys are among the most used alloys for orthopedic implants because of their excellent corrosion resistance, mechanical properties, biocompatibility. Although there is extensive literature on corrosion properties of Co-Cr-Mo alloys, fewer articles are focused on the synergistic effect of corrosion and wear in a simulated physiological solution. It is generally assumed that the current density measured during wear conditions for passive materials comes from the active area. However, there are no clear data supporting this statement. The current article correlates electrochemical measurements with the active area generated during sliding wear tests. Open circuit potential and current measurements, potentiodynamic scans, electrochemical impedance spectroscopy were carried out on samples under static and sliding wear conditions. These measurements showed the importance of the active area, where the current coming from the surface not being abraded is negligible. Finally, by combining the sliding wear and electrochemical tests, the synergistic effect of wear and corrosion was characterized for this alloy, documenting the metal carbide's detachment from the cobalt alloy matrix, which leads to a significant increase of total wear volume. © 2013 The Minerals, Metals & Materials Society and ASM International.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Orthopaedic implants and arthroplasty · Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. American Association of Orthopaedic Surgeons (AAOS): Total Hip Replacement http://orthoinfo.aaos.org/topic.cfm?topic=a00377
2. Centers for Disease Control and Prevention: Inpatient Surgery. Data are for the U.S. http://www.cdc.gov/nchs/fastats/insurg.htm
3. A.J. Smith, P. Dieppe, K. Vernon, M. Porter, A.W. Blom: Lancet, 2012, vol. 79, pp. 1199–1204.10.1016/S0140-6736(12)60353-5 ↗
4. H.C. Amstutz and M.J. Le Duff: Lancet, 2012, Vol. 380, pp 105.10.1016/S0140-6736(12)61168-4 ↗
5. MHRA: Medical Device Alert on “All metal-on-metal (MoM) hip replacements”, Ref: MDA/2012/036, 25 June 2012.
6. N.J. Hallab, J.J. Jacobs: Bull. NYU Hosp. Jt. Dis. 2009, Vol. 67, pp 182-88.
7. D. Granchi, E. Cenni, A. Giunti, and N. Baldini: J. Bone Jt. Surg. [Br]., 2012, vol. 94B, pp. 1126–34.10.1302/0301-620X.94B8.28135 ↗
8. L.A. Reynolds and E.M. Tansey, eds.: Early Development of Total Hip Replacement, Wellcome Witnesses to Twentieth Century Medicine, vol. 29, Wellcome Trust Centre for the History of Medicine at UCL, London, 2007, p. 169.
9. R.M. Urban, J.J. Jacobs, J.L. Gilbert, and J.O. Galante: J. Bone Jt. Surg.[Am]., 1994, vol. 76, pp. 1345–59.10.2106/00004623-199409000-00009 ↗
10. J.H. Dumbleton, M.T. Manley: J Arthroplasty, 2005, Vol.20, pp.174-88.10.1016/j.arth.2004.08.011 ↗
11. C. Lhotka, T. Szekeres, I. Steffan, K. Zhuber, K. Zweymüller: J. Orthop. Res., 2003, Vol. 21, pp.189-95.10.1016/S0736-0266(02)00152-3 ↗
12. T. Hanawa: Mater. Sci. Eng., 2004, Vol. 24, pp. 745-52.10.1016/j.msec.2004.08.018 ↗
13. I. Milošev: Biomedical Applications, Modern Aspects of Electrochemistry, vol. 55, Springer, New York, 2012, p. 211.
14. R. Rosenthal, B.R. Cardoso, I.S. Bott, R.P.R. Paranhos and E.A. Carvalho: J. Mater. Sci., 2010, Vol. 45, pp. 4021–28.10.1007/s10853-010-4480-x ↗
15. J.V.Giacchi, C.N. Morando, O. Fornaro, H.A. Palacio: Mater. Charact., 2011, Vol. 62, pp.53-61.10.1016/j.matchar.2010.10.011 ↗
16. S. Mineta, S. Namba, T. Yoneda, K. Ueda and T. Narushima: Metall. Mater. Trans. A, 2010, Vol. 41A, pp. 2129-38.10.1007/s11661-010-0227-1 ↗
17. S.-H. Lee, E. Takahashi, N. Nomura and A. Chiba: Mater. Trans., 2006, Vol. 47, pp. 287-90.10.2320/matertrans.47.287 ↗
18. M.E. Orazem, B. Tribollet: Electrochemical Impedance Spectroscopy, p, 525, Wiley, Hoboken, NJ, 2008.10.1002/9780470381588 ↗
19. B. Hirschorn, M.E. Orazem, B. Tribollet, V. Vivier, I. Frateur, M. Musiani: Electrochim. Acta 55 (2010) 6218–27.10.1016/j.electacta.2009.10.065 ↗
20. T. Hanawa, S. Hiromoto, K. Asami: Appl. Surf. Sci. 2001, Vol.183, pp. 68-75.10.1016/S0169-4332(01)00551-7 ↗
21. I. Milosev, H.H. Strehblow: Electrochim. Acta, 2003, Vol. 48, pp. 2767-74.10.1016/S0013-4686(03)00396-7 ↗
22. A.W.E. Hodgson, S. Kurz, S. Virtanen, V. Fervel, C.-O.A. Olsson, S. Mischler: Electrochim. Acta, 2004, Vol. 49, pp. 2167-78.10.1016/j.electacta.2003.12.043 ↗
23. M.T. Mathew, J.J. Jacobs, and M.A. Wimmer: Clin. Orthop. Relat. Res., 2012, vol. 470, pp. 3109–17.10.1007/s11999-012-2563-5 ↗
24. J.R. Goldberg and J.L. Gilbert: J. Biomed. Mater. Res., 1997, Vol. 37, pp. 421-31.10.1002/(SICI)1097-4636(19971205)37:3<421::AID-JBM13>3.0.CO;2-E ↗
25. Ponthiaux, F. Wenger, D. Drees, J.P. Celis: Wear, 2004, Vol. 256, pp. 459-68.10.1016/S0043-1648(03)00556-8 ↗
26. Y. Yan, A. Neville, D. Dowson, Tribol. Int., 2007, Vol. 40, pp.1492–99.10.1016/j.triboint.2007.02.019 ↗
27. Y. Yan, A. Neville, D. Dowson, S. Williams: Tribol. Int., 2006, Vol. 39, pp. 1509-17.10.1016/j.triboint.2006.01.016 ↗
28. M.T. Mathew, M.J. Runa, M. Laurent, J.J. Jacobs, L.A. Rocha, M.A. Wimmer: Wear, 2012, Vol. 271, pp. 1210–19.10.1016/j.wear.2011.01.086 ↗
29. D. Sun, J.A. Wharton, R.J.K. Wood: Tribol. Int., 2009, 42, pp. 1595-1604.10.1016/j.triboint.2009.03.018 ↗
30. M. Stemp, S. Mischler, D. Landolt: Corros. Sci., 2003, Vol. 45, pp.625-40.10.1016/S0010-938X(02)00136-1 ↗
31. P. Jemmely, S. Mischler, D. Landolt: Wear, 2000, Vol. 237, pp. 63-76.10.1016/S0043-1648(99)00314-2 ↗
32. K. Midander, A. de Frutos, Y. Hedberg, G. Darrie, I. Odnevall Wallinder: Integr. Environ. Assess. Manag., 2010, 6, pp. 456–68.10.1002/ieam.66 ↗