journal article·2014-02

Structure and Properties of Nano-Scale Oxide-Dispersed Iron

R. Vijay, M. Nagini, S. S. Sarma, M. Ramakrishna, A. V. Reddy, G. Sundararajan

Publisher page

Abstract

Bulk samples of pure iron and yttria dispersed iron with and without titanium (i.e., Fe, Fe-Y2O3, and Fe-Y2O3-Ti) were prepared by hot extrusion of high-energy ball-milled powders. An examination of the microstructure using TEM revealed that the addition of titanium resulted in the reduction of the dispersoid size with a concomitant increase in the volume fraction of the dispersoids. As a result, Fe-Y2O3-Ti exhibited a substantial increase in hardness and tensile properties as compared to Fe and Fe-Y2O3. The higher hardness and strength of Fe-Y2O3-Ti is shown to be due to the presence of finer and higher number density of Y-Ti-O complex oxides. Dynamic strain aging in the temperature range of 423 K to 573 K (150 °C to 300 °C) was observed in all the compositions studied.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Fusion materials and technologies · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. C. Zakine, C. Prioul and D. Francois: Mater. Sci. Eng. A, 1996, vol. 219, pp. 102-108.10.1016/S0921-5093(96)10415-9 ↗
2. S. Ukai, T. Okuda, M. Fujiwara, T. Kobayashi, S. Mizuta and H. Nakashima: J. Nucl. Sc. Technol., 2002, vol. 39, pp. 872-879.10.1080/18811248.2002.9715271 ↗
3. M.J. Alinger, G.R. Odette and G.E. Lucas: J. Nucl. Mater., 2002, vol. 307–311, pp. 484-489.10.1016/S0022-3115(02)01220-5 ↗
4. R.L. Klueh, P.J. Maziasz, I.S. Kim, L. Heatherly, D.T. Hoelzer, N. Hashimoto, E.A. Kenik and K. Miyahara: J. Nucl. Mater., 2002, vol. 307–311, pp. 773-777.10.1016/S0022-3115(02)01046-2 ↗
5. A. Alamo, V. Lambard, X. Averty and M.H. Mathon: J. Nucl. Mater., 2004, vol. 329–333, pp. 333-337.10.1016/j.jnucmat.2004.05.004 ↗
6. D.S. Gelles: J. Nucl. Mater., 1996, vol. 233–237, pp. 293-298.10.1016/S0022-3115(96)00222-X ↗
7. S. Ukai and M. Fujiwara: J. Nucl. Mater., 2002, vol. 307–311, pp. 749-757.10.1016/S0022-3115(02)01043-7 ↗
8. V. de Castro, T. Leguey, M.A. Monge, A. Muñoz, R. Pareja, D.R. Amador, J.M. Torralba, and M. Victoria: J. Nucl. Mater., 2003, vol. 322, pp. 228-234.10.1016/S0022-3115(03)00330-1 ↗
9. M. Klimiankou, R. Lindau and A. Moslang: J. Crystal Growth, 2003, vol. 249, pp. 381-387.10.1016/S0022-0248(02)02134-6 ↗
10. A. Ramar, Z. Oksiuta, N. Baluc and R. Schaublin: Fusion Eng. Des., 2007, vol. 82, pp. 2543-2549.10.1016/j.fusengdes.2007.05.048 ↗
11. C. Cayron, E. Rath, I. Chu and S. Launois: J. Nucl. Mater., 2004, vol. 335, pp. 83-102.10.1016/j.jnucmat.2004.06.010 ↗
12. M. Ratti, D. Leuvrey, M.H. Mathon, and Y. de Carlan: J. Nucl. Mater., 2009, vol. 386–388, pp. 540–543.10.1016/j.jnucmat.2008.12.171 ↗
13. M. K. Miller, D. T. Hoelzer, E. A. Kenik and K. F. Russell: J. Nucl. Mater., 2004, vol. 329-333, pp. 338-341.10.1016/j.jnucmat.2004.04.085 ↗
14. M.J. Alinger, S.C. Glade, B.D. Wirth, G.R. Odette, T. Toyama, Y. Nagai and M. Hasegawa: Mater. Sci. Eng. A, 2009, vol. 518, pp. 150-157.10.1016/j.msea.2009.04.040 ↗
15. S. Ohtsuka, S. Ukai, M. Fujiwara, T. Kaito and T. Narita: J. Nucl. Mater., 2004, vol. 329-333, pp. 372-376.10.1016/j.jnucmat.2004.04.043 ↗
16. T. Okuda and M. Fujiwara: J. Mater. Sci. Lett., 1995, vol. 14, pp. 1600-1603.10.1007/BF00455428 ↗
17. K. Verhiest, A. Almazouzi, N. De Wispelaere, R. Petrov, and S. Claessens: J. Nucl. Mater., 2009, vol. 385, pp. 308-311.10.1016/j.jnucmat.2008.12.006 ↗
18. J.H. Schneibel and S. Shim: Mater. Sci. Eng. A, 2008, vol. 488, pp. 134-138.10.1016/j.msea.2007.10.074 ↗
19. R. Vijay, M. Nagini, M. Ramakrishna, J. Joardar, A.V. Reddy and G. Sundararajan: Metall. Mater. Trans. A, 2013, vol. 44, pp. 1611-1620.10.1007/s11661-012-1494-9 ↗
20. S.W. Kim, T. Shobu, S. Ohtsuka, T. Kaito, M. Inoue and M. Ohnuma: Mater. Trans., 2009, vol. 50, pp. 917-921.10.2320/matertrans.MER2008439 ↗
21. S. Ohtsuka, S. Ukai, H. Sakasegawa, M. Fujiwara, T. kaito and T. Narita: J. Nucl. Mater., 2007, vol. 367-370, pp. 160-165.10.1016/j.jnucmat.2007.03.004 ↗
22. A. Raman, N. Baluc and R. Schaublin: J. Nucl. Mater., 2009, vol. 386-388, pp. 515-519.
23. G.E. Dieter: Mechanical Metallurgy, 3rd Ed, McGraw-Hill Book Co., London, 1988, pp. 212-219.
24. J. Ribis, Y. deCarlan: Acta Mater., 2012, vol. 60, pp. 238-252.10.1016/j.actamat.2011.09.042 ↗
25. L.F. He, J. Shirahata, T. Nakayama, T. Suzuki, H. Suematsu, I. Ihara, Y.W. Bao, T. Komatsu, and K.Niihara: Scripta Mater., 2011, vol. 64, pp. 548–551.10.1016/j.scriptamat.2010.11.042 ↗
26. M. Srinivas, S.V. Kamat, and P. Rama Rao: Mater. Sci. Eng. A, 2007, vol. 443, pp. 132-141.10.1016/j.msea.2006.08.042 ↗