Comparative Study on Austenite Decomposition and Cu Precipitation During Continuous Cooling Transformation
Source abstract
Abstract
The nature of Cu precipitation during continuous cooling of austenite is an essential issue in thermomechanical processing of Cu-bearing high-strength low-alloyed steel. The Cu precipitation behaviors and microstructural evolution are comparatively studied at two representative cooling rates of 0.1 and 10 K/s using dilatometry, optical microscopy, transmission electron microscope, and atom probe tomography. The microstructure developed at the cooling rate of 0.1 K/s contains a variety of microconstituents of polygonal ferrite, acicular ferrite, bainite, martensite, and retained austenite, which is attributed to the varying concentrations of untransformed austenite and consequently changing austenite decomposition kinetics. The Cu precipitation occurs only in association with polygonal ferrite transformation by interphase precipitation mechanism. No Cu precipitates are detected in acicular ferrite, retained austenite, and martensite. At the cooling rate of 10 K/s, the microstructure is dominated by acicular ferrite dispersed with the C-Ni precipitates that are assumed to be formed on the retained austenite. The Cu precipitation generally occurs from aging because of the high temperature and supersaturated austenite in association with acicular ferrite transformation. The nature of Cu precipitation in different cooling rates greatly depends on the initial composition or the extent of solute enrichment in the prior untransformed austenite and the associated phase transformation mechanisms, resulting in the differences in sizes, morphology, and compositions of Cu precipitation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Advanced Materials Characterization Techniques · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. R.D.K. Misra, Z. Jia, R. O’Malley, and S.J. Jansto: Mater. Sci. Eng. A, 2011, vol. 528A, pp. 87–80.10.1016/j.msea.2011.08.047 ↗
2. Z.W. Zhang, C.T. Liu, Y.R. Wen, A. Hirata, S. Guo, G. Chen, M.W. Chen, and B.A. Chin: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 351–9.10.1007/s11661-011-0835-4 ↗
3. S. Vaynman, D. Isheim, R.P. Kolli, S.P. Bhat, D.N. Seidman, and M.E. Fine: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 363–73.10.1007/s11661-007-9417-x ↗
4. X. Yu, J.L. Caron, S.S. Babu, J.C. Lippold, D. Isheim and D.N. Seidman: Acta Mater., 2010, vol. 58, pp. 5596–5609.10.1016/j.actamat.2010.06.031 ↗
5. T. Abe, M. Kurihara, H. Tagawa, and K. Tsukada: Trans. ISIJ, 1987, vol. 27, pp. 478–84.10.2355/isijinternational1966.27.478 ↗
6. H. Ohtsuka, G. Ghosh, and K. Nagal: ISIJ Int., 1997, vol. 37, pp. 296–301.10.2355/isijinternational.37.296 ↗
7. T.A. Kop, Y. Leeuwen, J. Sietsma, and S. van der Zwaag: ISIJ Inter., 2000, vol. 40 pp. 713–18.10.2355/isijinternational.40.713 ↗
8. S.H. Mousavi Anijdan and S. Yue: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 1140–62.10.1007/s11661-011-0958-7 ↗
9. C. Papandrea and L. Battezzati: Philos. Mag., 2007, vol. 87, pp. 1601–18.10.1080/14786430601080260 ↗
10. H. Chen, B. Appolaire and S. van der Zwaag: Acta Mater., 2011, vol. 59, pp. 6751–60.10.1016/j.actamat.2011.07.033 ↗
11. S.W. Thompson, D.J. Colvin, and G. Krauss: Metall. Mater. Trans. A, 1990, vol. 21A, pp. 1497–507.
12. S.W. Thompson, D.J. Colvin, and G. Krauss: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1557–71.10.1007/BF02649815 ↗
13. S.W. Thompson and G. Krauss: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1573–88.10.1007/BF02649816 ↗
14. R.W.K. Honeycombe and R.F. Mehl: Metall. Trans. A, 1976, vol. 7A, pp. 915–36.10.1007/BF02644057 ↗
15. H.I. Aaronson, M.R. Plichta, G.W. Franti, and K.C. Russell: Metall. Trans. A, 1978, vol. 9A, pp. 363–71.10.1007/BF02646386 ↗
16. H.K.D.H. Bhadeshia: Phys. Status Solidi. A, 1982, vol. 69A, pp. 745–50.10.1002/pssa.2210690238 ↗
17. G.R. Speich and T.M. Scoonover: in Processing, Microstructure and Properties of HSLA Steels, A.J. DeArdo, ed., TMS, Warrendale, PA, 1988, pp. 263–86.
18. Q.D. Liu, W.Q. Liu, and X.Y. Xiong: J Mater. Res., 2012, vol. 27, pp. 1060–67.10.1557/jmr.2012.54 ↗
19. S.W. Thompson, G. Krauss, and C.C. Tseng: J Mater. Sci. Lett., 1998, vol. 17, pp. 2075–78.10.1023/A:1006623915506 ↗
20. Q.D. Liu and S.J. Zhao: unpublished research.
21. M. Takahashi and H.K.D.H. Bhadeshia: J. Mater. Sci. Lett., 1989, vol. 8, pp. 477–78.10.1007/BF00720712 ↗
22. M.K. Miller: in Atom Probe Tomography: Analysis at the Atomic Level, 1st ed., Kluwer/Plenum Publishers, New York, NY, 1999.10.1007/978-1-4615-4281-0 ↗
23. I.A. Yakubtsov and G.R. Purdy: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 437–46.10.1007/s11661-011-0911-9 ↗
24. M. Militzer, R. Pandi, and E.B. Hawbolt: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1547–56.10.1007/BF02649814 ↗
25. R.G. Kamat, E.B. Hawbolt, L.C. Brown and J.K. Brimacombe: Metall. Trans. A, 1992, vol. 23A, pp. 2469–80.10.1007/BF02658050 ↗
26. R.A. Ricks, P.R. Howell, and R.W.K. Honeycombe: Metall. Trans. A, 1979, vol. 10A, pp. 1049–58.10.1007/BF02811651 ↗
27. T.A. Kop, Y. Leeuwen, J. Sietsma, and S. van der Zwaag: ISIJ Int., 2000, vol. 40, pp. 713–18.10.2355/isijinternational.40.713 ↗
28. Y.C. Liu, F. Sommer, and E.J. Mittemeijer: Acta Mater., 2006, vol. 54, pp. 3383–93.10.1016/j.actamat.2006.03.029 ↗
29. J.C. Zhao and M.R. Notis: Mater. Sci. Eng. R., 1995, vol. 15R, pp. 135–208.10.1016/0927-796X(95)00183-2 ↗
30. R.A. Ricks: J Mater. Sci., 1981, vol. 16, pp. 3006–12.10.1007/BF00540305 ↗
31. R.A. Ricks, P.R. Howell, and R.W.K. Honeycombe: Metal Sci., 1980, vol. 14, pp. 562–68.10.1179/030634580790426229 ↗
32. P.R. Howell, R.A. Ricks and R.W.K. Honeycombe: J Mater. Sci., 1980, vol. 15, pp. 376–80.10.1007/BF02396785 ↗
33. M. Schober, E. Eidenberger, H. Leitner, P. Staron, D. Reith, and R. Podloucky: Appl. Phys. A, 2010, vol. 99A, pp. 697–704.10.1007/s00339-010-5725-x ↗
34. R.P. Kolli, Z. Mao, D.N. Seidman, and D.T. Keane: Appl. Phys. Lett., 2007, vol. 91, 241903.10.1063/1.2820378 ↗
35. R.P. Kolli and D.N. Seidman: Acta Mater., 2008, vol. 56, pp. 2073–88.10.1016/j.actamat.2007.12.044 ↗
36. M.K. Miller, B.D. Wirth, and G.R. Odette: Mater. Sci. Eng. A, 2003, vol. 353 pp. 133–39.10.1016/S0921-5093(02)00679-2 ↗
37. M.E. Fine, J.Z. Liu, and M.D. Asta: Mater. Sci. Eng. A, 2007, vol. 463, pp. 271–74.10.1016/j.msea.2006.07.164 ↗