journal article·2014-02Open access

Effects of Dynamic Strain Hardening Exponent on Abnormal Cleavage Fracture Occurring During Drop Weight Tear Test of API X70 and X80 Linepipe Steels

Minju Kang, Hyunmin Kim, Sunghak Lee, Sang Yong Shin

Abstract

In this study, drop weight tear tests (DWTT) were conducted on API X70 and X80 linepipe steels fabricated with various compositions and rolling and cooling conditions in order to correlate the strain hardening with the abnormal cleavage fracture occurring in the hammer-impacted area. Area fractions of fracture modes were measured from fractured DWTT specimens, and the measured data were analyzed in relation to microstructures, Charpy impact energy, and strain hardening. All the steels consisted of fine acicular ferrite, together with some bainitic ferrite, granular bainite, and martensite-austenite constituent. As the volume fraction of acicular ferrite increased, the area fraction of DWTT abnormal cleavage fracture decreased because the toughness of acicular ferrite was higher than other microstructures. The area fraction of abnormal cleavage fracture was weakly related with strain hardening exponents obtained from the quasi-static tensile and compressive tests, but showed better correlation with those obtained from the dynamic compressive test. This tendency could be more clearly observed when steels having similar Charpy impact energy levels were grouped. Since the DWTT was performed under a dynamic loading condition, thus, the abnormal cleavage fracture behavior should be related with the strain hardening analyzed under a dynamic loading condition.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. R. Deny: Pipeline Technology, vol. I, Elsevier, Amsterdam, Netherlands, 2000, pp. 1–116.
2. D.P. Fairchild, M.L. Macia, S.D. Papka, C.W. Petersen, J.H. Stevens, S.T. Barbas, N.V. Bangaru, J.Y. Koo, and M.J. Luton: Proc. Int. Pipe Dreamer’s Conf., Scientific Surveys, Ltd., Yokohama, Japan, 2002, pp. 307–21.
3. K.T. Corbett, R.R. Bowen, and C.W. Petersen: Int. J. Offshore Polar Eng., 2004, vol. 14, pp. 75-80.
4. API: API Recommended Practice 5L3, API, Washington, DC, 1996.
5. G. Mannucci and D. Harris: Fracture Properties of API X100 Gas Pipeline Steels, Final Report, European Commission, 2002, pp. 1–128.
6. D.J. Horsley: Eng. Fract. Mech., 2003, vol. 70, pp. 547-52.10.1016/S0013-7944(02)00136-4 ↗
7. G.M. McClure, A.R. Duffy, and R.J. Eiber: J. of Engineering for Industry, 1965, vol. 4, pp. 265-78.10.1115/1.3670809 ↗
8. R.J. Eiber, A.R. Duffy, and G.M. McClure: Impact Testing of Metals, ASTM, West Conshohocken, PA, 1970, pp. 181-91.10.1520/STP32062S ↗
9. K. Seifert: Materials Testing, 1984, vol. 26, pp. 277-80.10.1515/mt-1984-260808 ↗
10. H. Kashimura, M. Ogasawara, and H. Mimura: Metal Progress, 1976, vol. 11, pp. 58-62.
11. L. Pussegoda, L. Malik, A. Dinovitzer, B. A. Graville, and A.B. Rothwell: Proc. 2000 Internsh. Pipeline Conf., ASME, Calgary, 2000, pp. 239–45.
12. N. Nozaki, K. Bessyo, Y. Sumitomo, I. Takeuchi, and A. Yamashita: Sumitomo Search, 1981, vol. 26, pp. 76-90.
13. B. Hwang, S. Lee, Y.M. Kim, S. Lee, N.J. Kim, J.Y. Yoo, and C.S. Woo: Mater. Sci. Eng. A, 2004, vol. A368, pp. 18-27.10.1016/j.msea.2003.09.075 ↗
14. B. Hwang, Y.G. Kim, S. Lee, N.J. Kim, and J.Y. Yoo: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 371-87.10.1007/s11661-005-0309-7 ↗
15. H.K. Sung, S.S. Sohn, S.Y. Shin, S. Lee, N.J. Kim, S.H. Chon, and J.Y. Yoo: Mater. Sci. Eng., 2012, vol. A541, pp. 181-89.10.1016/j.msea.2012.02.019 ↗
16. S. Hong, S.Y. Shin, S. Lee, and N.J. Kim: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 2619-32.10.1007/s11661-011-0697-9 ↗
17. N. Iwasaki, T. Yamaguchi, and T. Taira: Mech. Work Steel Process, 1975, vol. 13, pp. 294-314.
18. ASTM Standard E8m-09: Standard Test Methods for Tension Testing of Metallic Materials, Annual Book of ASTM Standards, ASTM, West Conshohocken, PA, 2009, pp. 1–27.
19. ASTM Standard E23-02: Standard Test Method for Notched Bar Impact Testing of Metallic Materials, ASTM, West Conshohocken, PA, 2002, pp. 1–27.
20. J. Hopkinson: Proc. Manch. Lit. Philos. Soc., vol. 11, 1872, pp. 40–45.10.1038/006045a0 ↗
21. P.H. Pope and J.E. Field: J. Phys. E: Sci. Instrum., 1984, vol. 17, pp. 817-20.10.1088/0022-3735/17/9/021 ↗
22. T. Araki: Atlas for Bainitic Microstructures, ISIJ, Tokyo, Japan, 1992, pp. 1-100.
23. G. Krauss and S.W. Thompson: ISIJ Int., 1995, vol. 35, pp. 937-45.10.2355/isijinternational.35.937 ↗
24. S.W. Thompson, D.J. Colvin, and G. Krauss: Metall. Trans. A, 1990, vol. 21A, pp. 1493-1507.10.1007/BF02672564 ↗
25. H.K.D.H. Bhadeshia: Mater. Sci. Eng. A, 2004, vol. A378, pp. 34-39.10.1016/j.msea.2003.10.328 ↗
26. N. Saeidi and A. Ekrami: Mater. Sci. Eng. A, 2010, vol. A527, pp.5575-81.10.1016/j.msea.2010.05.015 ↗
27. J. W. Sowards, C. N. McCowan, E. S. Drexler: Mater. Sci. Eng. A, 2012, vol. A551, pp.140-48.10.1016/j.msea.2012.04.108 ↗
28. S. Lee, D. Kwon, Y.K. Lee, and O. Kwon: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1093-1100.10.1007/BF02670605 ↗
29. N.J. Kim: J. of Metals,1983, vol. 35, pp. 21-27.
30. K.-T. Park, S.W. Hwang, J.H. Ji, and C.H. Lee: Met. Mater. Int., 2011, vol. 17, pp. 349-56.10.1007/s12540-011-0425-4 ↗
31. B. Hwang, S. Lee, Y.M. Kim, N.J. Kim, and S.S. Ahn: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 725-39.10.1007/s11661-005-1004-4 ↗
32. H.-S. Yang, B.-S. Seong, S.-H. Han, and S.-H. Choi: Met. Mater. Int., 2011, vol. 17, pp. 403-12.10.1007/s12540-011-0616-z ↗
33. Y.M. Kim, S.Y. Shin, H. Lee, B. Hwang, S. Lee, and N.J. Kim: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1731-42.10.1007/s11661-007-9197-3 ↗
34. G. Huang and K.M. Wu: Met. Mater. Int., 2011, vol. 17, pp. 847-52.10.1007/s12540-011-1024-0 ↗
35. M. Diaz-Fuentes, A. Iza-Mendia, and I. Gutierrez: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2505-16.10.1007/s11661-003-0010-7 ↗
36. J.Y. Yoo and J.S. Woo: Proc. Int. Pipe Dreamer’s Conf., M. Toyota and R. Denys, eds., Scientific Surveys, Ltd., Yokohama, Japan, 2002, pp. 441–56.
37. B.C. Kim, S. Lee, N.J. Kim, and D.Y. Lee: Metall. Trans. A, 1991, vol. 22A, pp. 139-49.10.1007/BF03350956 ↗
38. Y. Kim, J. Lee, J. Park, and S.-H. Jeon: Met. Mater. Int., 2011, vol. 17, pp. 607-11.10.1007/s12540-011-0812-x ↗
39. S.Y. Han, S.Y. Shin, S. Lee, N.J. Kim, J.-H. Bae, and K. Kim: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 329-40.10.1007/s11661-009-0135-4 ↗
40. G.E. Dieter: Mechanical Metallurgy, 3rd ed., McGraw-Hill Book Co., New York, 1988, pp. 295–301.
41. H.M. Ghomi and A.G. Odeshi: Mater. Sci. Eng. A, 2012, vol. A532, pp. 308-15.10.1016/j.msea.2011.10.096 ↗
42. W.S. Lee and C.Y. Liu: Mater. Sci. Eng. A, 2006, vol. A426, pp. 101-13.10.1016/j.msea.2006.03.087 ↗
43. B.L. Boyce and M.F. Dilmore: Int. J. Impact Eng., 2009, vol.36, pp.263-71.10.1016/j.ijimpeng.2007.11.006 ↗
44. J.B. Seol, N.S. Lim, B.H. Lee, L. Renaud, and C.G. Park: Met. Mater. Int., 2011, vol. 17, pp. 413-16.10.1007/s12540-011-0617-y ↗
45. K.T. Park, D.Y. Hwang, Y.K. Lee, Y.K. Kim, and D.H. Shin: Mater. Sci. Eng. A, 2003, vol. A341, pp. 273-81.10.1016/S0921-5093(02)00216-2 ↗
46. G.T. Hahn, R.G. Hoagland, M.F. Kanninen, and A.R. Posenfield: Proc. 2 nd Int. Conf. Press. Vessel Technol., Part II, Materials, Fabrication and Inspection, ASME, New York, 1973, pp. 981–94.