journal article·2014-10

Microstructural Evolution and Mechanical Behaviors of an Nb-16Si-22Ti-2Al-2Hf Alloy with 2 and 17 at. pct Cr Additions at Room and/or High Temperatures

Chunyan Yang, Lina Jia, Chungen Zhou, Hu Zhang, Jiangbo Sha

Publisher page

Abstract

X-ray diffraction analysis, scanning electron microscopy, and transmission electron microscopy were used to investigate the microstructures and orientation relationships (ORs) of Nb-16Si-22Ti-2Al-2Hf-(2,17)Cr alloys (hereafter referred to as 2Cr and 17Cr alloys, respectively). The mechanical properties of the two alloys at room and/or high temperatures were compared. The 2Cr alloy comprised NbSS and (α + β)-Nb5Si3 phases, while the 17Cr alloy consisted of NbSS, (α + β)-Nb5Si3 and Laves Cr2Nb phases with a C15 structure. The β-Nb5Si3 and Laves Cr2Nb phases exhibited variable ORs with respect to the NbSS phase. The Laves Cr2Nb phase was found to play a negative role on the fracture toughness at room temperature and on the compressive strength at temperatures from 1523 K to 1623 K (1250 °C to 1350 °C). The fracture toughness and the compressive yield strength at 1623 K (1350 °C) both decreased from 14.4 to 10.3 MPa m1/2 and from 300 to 85 MPa, respectively, when the nominal Cr content increased from 2 to 17 at. pct. Finally, the fracture modes of these typical NbSS/Nb5Si3 and NbSS/Nb5Si3/Cr2Nb microstructures under bending and compression conditions at room and high temperatures were investigated and discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. B.P. Bewlay, J.J. Lewandowksi and M.R. Jackson, JOM, 1997, vol. 49, pp. 44–5.10.1007/BF02914402 ↗
2. P.R. Subramanian, M.G. Mendiratta and D.M. Dimiduk, JOM, 1996, vol. 48, pp. 33–8.10.1007/BF03221360 ↗
3. J.D. Rigney and J.J. Lewandowksi, Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3292–306.10.1007/BF02663879 ↗
4. D.M. Shah, D.L. Anton, D.P. Pope, S. Chin, Mater. Sci. Eng. A, 1995, vol. 192/193, pp. 685–72.
5. M. Fujikara, A. Kasama, R. Tannaka and S. Hanada, Mater. Trans., 2004, vol. 45, pp. 493–501.10.2320/matertrans.45.493 ↗
6. J.B. Sha, H. Hirai, T. Tabaru, H. Ueno, A. Kitahara and S. Hanada, Metall. Mater. Trans. A, 2003, vol. 34A, pp. 85–94.10.1007/s11661-003-0210-1 ↗
7. B.P. Bewlay, M.R. Jackson and P.R. Subramanian, JOM, 1999, vol. 51, pp. 32–3.10.1007/s11837-999-0077-8 ↗
8. B.P. Bewlay, M.R. Jackson, J.C. Zhao, P.R. Subramanian, M.G. Mendiratta and J.J. Lewandowski, MRS Bull., 2003, vol.28, pp. 646–53.10.1557/mrs2003.192 ↗
9. M.R. Jackson, B.P. Bewlay, and J.C. Zhao, American Patent: US 0066578, 2003.
10. J.C. Zhao and J.H. Westbrook, MRS Bull., 2003, vol.28, pp. 622–30.10.1557/mrs2003.189 ↗
11. B.P. Bewlay, M.R. Jackson and H.A. Lipsitt, Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3801–8.10.1007/BF02595629 ↗
12. H. Guo and X.P. Guo, Scripta Mater., 2011, vol. 64, pp. 637–40.10.1016/j.scriptamat.2010.12.008 ↗
13. M.G. Mendiratta and D.M. Dimiduk, Metall. Trans. A, 1993, vol. 24A, pp. 501–4.10.1007/BF02657338 ↗
14. J.L. Yu, K.F. Zhang, Z.K. Li, X. Zheng, G.F. Wang and R. Bai, Scripta Mater., 2009, vol. 61, pp. 620–3.10.1016/j.scriptamat.2009.05.039 ↗
15. K.S. Chan, Mater. Sci. Eng. A, 2002, vol. 329, pp. 513–32.10.1016/S0921-5093(01)01502-7 ↗
16. M.R. Jackson, B.P. Bewlay and R.G. Rowe, JOM, 1996, vol. 48, pp. 39-40.10.1007/BF03221361 ↗
17. X. Li, H. Chen, J., H. Zhang, Mater. Sci. Eng. A, 2010, vol. 527, pp. 6140–52.10.1016/j.msea.2010.04.046 ↗
18. T.B. Massalski, ed.: Binary Alloy Phase Diagrams, ASM, Materials Park, OH, vol. 1, 1990, p. 1511.
19. J. Geng, P. Tsakiropoulos and G. Shao, Mater. Sci. Eng. A, 2006, vol. 441, pp. 26–38.10.1016/j.msea.2006.08.093 ↗
20. K. S. Kumar, P.M. Hazzledine, Intermetallics, 2004, vol. 12, pp. 763–70.10.1016/j.intermet.2004.02.017 ↗
21. A.V. Kazantzis, M. Aindow, I.P. Jones, G.K. Triantafyllidis, and J.Th M.De Hosson: Acta Mater., 2007, vol. 55, pp. 1873–84.10.1016/j.actamat.2006.10.048 ↗
22. Y.L. Hu, A. Vasiliev, L. Zhang, K. Song and M. Aindow, Scripta Mater., 2009, vol. 60, pp. 72–5.10.1016/j.scriptamat.2008.08.034 ↗
23. Y. Li, S. Miura, K. Ohsasa, C. Ma, H. Zhang, Intermetallics, 2011, Vol. 19, pp. 460–9.10.1016/j.intermet.2010.10.024 ↗
24. N. Sekido, Y. Kimura, S. Miura, Y. Mishima, Mater. Sci. Eng. A, 2007, vol. 444, pp. 51–7.10.1016/j.msea.2006.06.140 ↗
25. B.P. Bewlay, H.A. Lipsitt, M.R. Jackson, W.J. Reeder and J.A. Sutliff, Mater. Sci. Eng. A, 1995, vol. 192/193A, pp. 534–43.10.1016/0921-5093(95)03299-1 ↗
26. J.B. Sha, H. Hirai, T. Tabaru, H. Ueno, A. Kitahara and S. Hanada, Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2861–71.10.1007/s11661-003-0187-9 ↗
27. D.L. Davidson, K.S. Chan and D.L. Anton, Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3007–18.10.1007/BF02663850 ↗
28. K.S. Chan, Oxid. Met., 2004, vol. 61, pp. 165–94.10.1023/B:OXID.0000025330.65837.d1 ↗
29. J. Sha, C. Yang and J. Liu, Scripta Mater., 2010, vol. 62, pp. 859–62.10.1016/j.scriptamat.2010.02.023 ↗