Effects of Heat Treatment on Grain-Boundary β-Mg17Al12 and Fracture Properties of Resistance Spot-Welded AZ80 Mg Alloy
Source abstract
Abstract
The distribution and morphology of β-Mg17Al12 intermetallic phase in resistance spot-welded AZ80 Mg alloy were investigated by means of optical microscopy, scanning electron microscopy, and X-ray diffraction. The influence of intermetallic phase on mechanical strength was studied by tensile shear testing and fractography. The results showed that continuous networks of β-Mg17Al12 formed along grain boundaries in both the nugget and heat-affected zone of the spot-welded AZ80 Mg alloy. Those continuous grain-boundary β-Mg17Al12 networks acted as effective crack propagation paths, which had negative effects on the weld strength. Post-weld solution heat treatment effectively reduced the amount of β-Mg17Al12 and broke the grain-boundary intermetallic networks in both the nugget and heat-affected zone. This significantly increased the weld strength of AZ80 Mg alloy and changed the fracture mode from nugget pull-out in the as-welded condition to through-thickness after heat treatment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. S. F. Su, J. C. Huang, H. K. Lin and N. J. Ho: Metall. Mater. Trans. A, 2001, vol. 33A, pp. 1461-1473.
2. D. X. Sun, D. Q. Sun, X. Y. Guand and Z. Z. Xuan: ISIJ Int., 2008, vol. 49, pp. 270-274.10.2355/isijinternational.49.270 ↗
3. C. J. Huang, C. M. Cheng, C. P. Chouand and F. H. Chen: J. Mater. Sci. Technol., 2011, vol. 27, pp. 633-640.10.1016/S1005-0302(11)60118-7 ↗
4. X. Cao, M. Jahazi, J. P. Immarigeon and W. Wallace: Mater. Process. Technol., vol. 171, pp. 188-204, 2006.10.1016/j.jmatprotec.2005.06.068 ↗
5. L. Xiao, L. Liu, Y. Zhou and S. Esmaeili: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 1511-1522.10.1007/s11661-010-0197-3 ↗
6. L. Liu, L. Xiao, J. C. Feng, Y. H. Tian, S. Q. Zhou and Y. Zhou: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 2642-2650.10.1007/s11661-010-0339-7 ↗
7. Y. Wang, G. Liu and Z. Fan: Scripta Mater., 2006, vol. 54, pp. 903-908.10.1016/j.scriptamat.2005.10.073 ↗
8. T. Zhu, Z. W. Chen and W. Gao: Mater. Charact., 2008, vol. 59, pp. 1550-1558.10.1016/j.matchar.2008.01.022 ↗
9. K. N. Braszczynska-Malik and M. Mroz: J. Alloy Compd., 2011, vol. 509, pp. 9951-9958.10.1016/j.jallcom.2011.07.105 ↗
10. G. Nussbaum, P. Sainfort and G. Regazzoni: Scripta Metall. Mater., 1989, vol. 23, pp. 1079-1084.10.1016/0036-9748(89)90303-7 ↗
11. Y. Z. Lu, Q. D. Wang, W. J. Ding, X. Q. Zeng and Y. P. Zhu: Mater. Lett., 2000, vol. 44, pp. 265-268.10.1016/S0167-577X(00)00041-0 ↗
12. S. Celotto: Acta Mater., 2000, vol. 48, pp. 1775-1787.10.1016/S1359-6454(00)00004-5 ↗
13. J. B. Clark: Acta Metall. Mater., 1968, vol. 16, pp. 141-152.10.1016/0001-6160(68)90109-0 ↗
14. S. Kleiner, O. Beffort, A. Wahlen and P. J. Uggowitzer: Light Met., 2002, vol. 2, pp. 277-280.10.1016/S1471-5317(03)00012-9 ↗
15. I. A. Yakubtsov, B. J. Diak, C. A. Sager, B. Bhattacharya, W. D. MacDonald and M. Niewczas: Mat. Sci. Eng. A, 2008, vol. 496, pp. 247-255.10.1016/j.msea.2008.05.019 ↗
16. L. A. Dobrzanski, T. Tanski, L. Cızek and Z. Brytan: J. Mater. Process Tech., 2007, vol. 192, pp. 567-574.10.1016/j.jmatprotec.2007.04.045 ↗
17. M. M. Avedesian and H. Baker: Magnesium and Magnesium Alloys, ASM International, Materials Park, OH, 1999, pp. 79.
18. M. Hansen and K. Anderko: Constitution of Binary Alloys, 2nd ed., McGraw-Hill, New York, NY, 1958, p. 1042.
19. C. Huang and S. Kou: Weld. J., 2000, vol. 5, pp. 113-120.10.1179/136217100101538100 ↗
20. C. Huang and S. Kou: Weld. J., 2002, vol. 10, pp. 211-222.
21. S. Zhang: Inter. J. Fracture, 1997, vol. 88, pp. 167-85.10.1023/A:1007461430066 ↗
22. J. F. Copper and R. A. Smith: Int. J. Fatig., 1985, vol. 3, pp. 137-40.10.1016/0142-1123(85)90023-4 ↗
23. N. Pan and S. D. Sheppard: Eng. Fract. Mech., 2003, vol. 70, pp. 671–684.10.1016/S0013-7944(02)00076-0 ↗
24. P. Liu, Y. Li, H. Geng and J. Wang: Marer. Lett., 2007, vol. 61, pp. 2001-2005.
25. P. Liu, Y. Li, H. Geng and J. Wang: Mater. Lett., 2005, vol. 59, pp. 2001-2005.10.1016/j.matlet.2005.02.038 ↗
26. Q. Guo, H. Yan, Z. Chen and H. Zhang: T. Nonferr. Metal. Soc., 2006, vol. 16, pp. 922-926.10.1016/S1003-6326(06)60352-X ↗
27. J. M. Song, T. S. Lui, H. W. Chang and L. H. Chen: Scripta Mater., 2006, vol. 54, pp. 399-404.10.1016/j.scriptamat.2005.10.021 ↗
28. S. Kou: Welding Metallurgy, 2nd ed., John Wiley & Sons, Hoboken, NJ, 2003, p. 328.
29. B. Kim, J. Do, S. Lee and I. Park: Mat. Sci. Eng. A, 2010, vol. 527, pp. 6745-6757.10.1016/j.msea.2010.07.016 ↗
30. M. R. Barnett: Scripta Mater., 2008, vol. 59, pp. 696–698.10.1016/j.scriptamat.2008.05.027 ↗
31. M. R. Barnett, Z. Keshavarz, A. G. Beer and D. Atwell: Acta Mater., 2004, vol. 52, pp. 5093–5103.10.1016/j.actamat.2004.07.015 ↗
32. M. A. Meyers, O. Vohringer and V. A. Lubarda: Acta Mater., 2001, vol. 49, pp. 4025–4039.10.1016/S1359-6454(01)00300-7 ↗
33. H. Zhang, G. S. Huang, B. Song, L. Zhang and D. Q. Kong: T. Nonferr. Metal. Soc., 2011, vol. 21, pp. 844-850.10.1016/S1003-6326(11)60791-7 ↗
34. T. Mukai, M. Yamanoi, H. Watanabe and K. Higashi: Scripta Mater., 2001, Vol. 45, pp. 89-94.10.1016/S1359-6462(01)00996-4 ↗
35. M. Sanjari, S. F. Farzadfar, T. Sakai, H. Utsunomiya, E. Essadiqi, I. H. Jung and S. Yue: Mat. Sci. Eng. A, 2013, vol. 561, pp. 191–202.10.1016/j.msea.2012.10.075 ↗
36. P. Mehrotra, T. M. Lillo and S. R. Agnew: Scripta Mater., 2006, vol. 55, pp. 855–858.10.1016/j.scriptamat.2006.08.005 ↗
37. S. R. Agnew, P. Mehrotra, T. M. Lillo, G. M. Stoica and P. K. Liaw: Acta Mater., 2005, vol. 53, pp. 3135–3146.10.1016/j.actamat.2005.02.019 ↗
38. S. R. Agnew, P. Mehrotra, T. M. Lillo, G. M. Stoica and P. K. Liaw: Mat. Sci. Eng. A, 2005, vol. 408, pp. 72–78.10.1016/j.msea.2005.07.052 ↗
39. Z. Wang, M. Gao, H. Tang and X. Zeng: Mater. Charact., 2011, vol. 62, pp. 943-951.10.1016/j.matchar.2011.07.002 ↗
40. O. Sabokpa, A. Zarei-Hanzaki and H. R. Abedi: Mat. Sci. Eng. A., 2012, vol. 550, pp. 31-38.10.1016/j.msea.2012.03.112 ↗
41. H. A. Patel, D. L. Chen, S. D. Bhole and K. Sadayappan: J. Alloy Compd., 2010, vol. 496, pp. 140-148.10.1016/j.jallcom.2010.02.042 ↗
42. P. B. Srinivasan, S. Riekehr, C. Blawert, W. Dietzel and M. Kocak: T. Nonferr. Metal. Soc., 2011 vol. 21, pp. 1-8.10.1016/S1003-6326(11)60670-5 ↗
43. M. Bobby Kannan, W. Dietzel, C. Blawert, C. Riekehr and M. Kocak: Mat. Sci. Eng. A, 2007, vol. 444, pp. 220-226.10.1016/j.msea.2006.08.075 ↗