journal article·2014-12

Crystal Plasticity Finite Element Method Simulations for a Polycrystalline Ni Micro-Specimen Deformed in Tension

Yoon Suk Choi, Michael A. Groeber, Paul A. Shade, Todd J. Turner, Jay C. Schuren, Dennis M. Dimiduk, Michael D. Uchic, Anthony D. Rollett

Publisher page

Abstract

A micro-tensile test system equipped with in situ monitoring of the in-plane displacements of a surface and an electron backscattered diffraction-based serial-sectioning technique were used to study the deformation (up to 2.4 pct axial plastic strain in tension) of a polycrystalline nickel micro-specimen. The experimental data include the global engineering stress-engineering strain curve, the local mesoscopic in-plane displacement and strain fields, the three-dimensional microstructure of the micro-specimen reconstructed after the tensile test, and the kernel-average misorientation distribution. The crystal plasticity finite element method using elasto-viscoplastic constitutive formulations was used to simulate the global and local deformation responses of the micro-specimen. Three different boundary conditions (BCs) were applied in simulation in order to study the effects of the lateral displacement (perpendicular to the loading direction) of the top and bottom faces of the specimen gage section. The simulation results were compared to the experimental results. The comparison between experiment and simulation results is discussed, based upon their implications for understanding the deformation of micro-specimens and the causes associated with uncertainties embedded in both experimental and numerical approaches. Also, the sensitivity of BCs to near-field and far-field responses of the micro-specimen was systematically studied. Results show that the experimental methodology used in the present study allows for limited but meaningful comparisons to crystal plasticity finite element simulations of the micro-specimen under the small plastic deformation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. C. Rehrl, S. Kleber, T. Antretter, and R. Pippan: J. Phys. Conf. Ser., 2010, vol. 240, p. 012157.10.1088/1742-6596/240/1/012157 ↗
2. Z. Zhao, M. Ramesh, D. Raabe, A.M. Cuitino, and R. Radovitzky: Int. J. Plast., 2008, vol. 24, pp. 2278–97.10.1016/j.ijplas.2008.01.002 ↗
3. E. Heripre, M. Dexet, J. Crepin, L. Gelebart, A. Roos, M. Bornert, and D. Caldemaison: Int. J. Plast., 2007, vol. 23, pp. 1512–39.10.1016/j.ijplas.2007.01.009 ↗
4. A. Musienko, A. Tatschl, K. Schmidegg, O. Kolednik, R. Pippan, and G. Cailetaud: Acta Mater., 2007, vol. 55, pp. 4121–36.10.1016/j.actamat.2007.01.053 ↗
5. S.R. Kalidindi, A. Bhattacharyya, and R.D. Doherty: Proc. R. Soc. Lond. A, 2004, vol. 460, pp. 1935–56.10.1098/rspa.2003.1260 ↗
6. C. Rehrl, B. Volker, S. Kleber, T. Antretter, and R. Pippan: Acta Mater., 2012, vol. 60, pp. 2379–86.10.1016/j.actamat.2011.12.052 ↗
7. Y. Yang, L. Wang, T.R. Bieler, P. Eisenlohr, and M.A. Crimp: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 636–44.10.1007/s11661-010-0475-0 ↗
8. D. Raabe, M. Sachtleber, Z. Zhao, F. Roters, and S. Zaefferer: Acta Mater., 2001, vol. 49, pp. 3433–41.10.1016/S1359-6454(01)00242-7 ↗
9. D. Pyle, J. Lu, D. Littlewood, and A. Maniatty: Comput. Mech., 2013, vol. 52, pp. 135–50.10.1007/s00466-012-0802-y ↗
10. H. Lim, M.G. Lee, J.K. Kim, B.L. Adams, and R.H. Wagoner: Int. J. Plast., 2011, vol. 27, pp. 1328–54.10.1016/j.ijplas.2011.03.001 ↗
11. F. Roters, P. Eisenlohr, L. Hantcherli, D.D. Tjahjanto, T.R. Bieler, and D. Raabe: Acta Mater., 2011, vol. 58, pp. 1152–211.10.1016/j.actamat.2009.10.058 ↗
12. A.C. Lewis, M.A. Siddiq Qidwai, and A.B. Geltmacher: Metall. Mater. Trans. A, 2010, vol. 41A, p. 2522–31.10.1007/s11661-010-0284-5 ↗
13. M.A. Siddiq Qidwai, A.C. Lewis, and A.B. Geltmacher: Acta Mater., 2009, vol. 57, pp. 4233–47.10.1016/j.actamat.2009.05.021 ↗
14. T.R. Bieler, P. Eisenlohr, F. Roters, D. Kumar, D.E. Mason, M.A. Crimp, and D. Raabe: Int. J. Plast., 2009, vol. 25, pp. 1655–83.10.1016/j.ijplas.2008.09.002 ↗
15. W. Ludwig, A. King, P. Reischig, M. Herbiga, E.M. Lauridsend, S. Schmidt, H. Proudhon, S. Forest, P. Cloetens, S. Rolland du Roscoat, J.Y. Buffière, T.J. Marrow, and H.F. Poulsen: Mater. Sci. Eng. A, 2009, vol. 524, pp. 69–76.10.1016/j.msea.2009.04.009 ↗
16. A. Zeghadi, S. Forest, A.-F. Gourgues, and O. Bouaziz: Philos. Mag., 2007, vol. 87, pp. 1425–46.10.1080/14786430601009517 ↗
17. O. Diard, S. Leclercq, G. Rousselier, and G. Cailletaud: Int. J. Plast., 2005, vol. 21, pp. 691–722.10.1016/j.ijplas.2004.05.017 ↗
18. D. Chandrasekaran and M. Nygards: Mater. Sci. Eng. A, 2004, vol. 365, pp. 191–95.10.1016/j.msea.2003.09.027 ↗
19. O. Diard, S. Leclercq, G. Rousselier, and G. Cailletaud: Comput. Mater. Sci., 2002, vol. 25, pp. 73–84.10.1016/S0927-0256(02)00251-3 ↗
20. F. Barbe, L. Decker, D. Jeulin, and G. Cailletaud: Int. J. Plast., 2001, vol. 17, pp. 513–36.10.1016/S0749-6419(00)00061-9 ↗
21. J. Harder: Int. J. Plast., 1999, vol. 15, p. 605–24.10.1016/S0749-6419(99)00002-9 ↗
22. R. Becker and O. Richmond: Model. Simul. Mater. Sci. Eng., 1994, vol. 2, pp. 439–54.10.1088/0965-0393/2/3A/002 ↗
23. E. Marin and P.R. Dawson: Appl. Mech. Eng., 1998, vol. 165, pp. 1–21.10.1016/S0045-7825(98)00034-6 ↗
24. E. Marin and P.R. Dawson: Appl. Mech. Eng., 1998, vol. 165, pp. 23–41.10.1016/S0045-7825(98)00033-4 ↗
25. P.A. Shade, M.A. Groeber, M.D. Uchic, Y.S. Choi, T.J. Turner, R. Wheeler, D.M. Dimiduk, and C. Woodward: Report No. ADA553437, DTIC, November 2011.
26. P.A. Shade, M.A. Groeber, J.C. Schuren, and M.D. Uchic: Integr. Mater. Manuf. Innov., 2012, vol. 2, p. 5.10.1186/2193-9772-2-5 ↗
27. P.A. Shade, S.L. Kim, R. Wheeler, and M.D. Uchic: Rev. Sci. Instrum., 2012, vol. 83, p. 053903.10.1063/1.4720944 ↗
28. N.R. Barton and P.R. Dawson: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1967–75.10.1007/s11661-001-0009-x ↗
29. Y. Choi, T. Parthasarathy, D. Dimiduk, and M. Uchic: Mater. Sci. Eng. A, 2005, vol. 397, pp. 69–83.10.1016/j.msea.2005.01.057 ↗
30. U.F. Kocks: in Texture and Anisotropy, Cambridge University Press, Cambridge, 2000.
31. D. Peirce, R. Asaro, and A. Needleman: Acta Metall., 1983, vol. 31, pp. 1951–76.10.1016/0001-6160(83)90014-7 ↗
32. T.J. Turner, P.A. Shade, J.C. Schuren, and M.A. Groeber: Modell. Simul. Mater. Sci. Eng., 2013, vol. 21, p. 015002.10.1088/0965-0393/21/1/015002 ↗
33. P.A. Shade, R. Wheeler, Y.S. Choi, M.D. Uchic, D.M. Dimiduk, and H.L. Fraser: Acta Mater., 2009, vol. 57, pp. 4580–87.10.1016/j.actamat.2009.06.029 ↗
34. R. Wheeler, P.A. Shade, and M.D. Uchic: JOM, 2012, vol. 64, pp. 58–65.10.1007/s11837-011-0224-x ↗
35. M. Syha, W. Rheinheimer, M. Baurer, E. Lauridsen, W. Ludwig, D. Weygand, and P. Gumbsch: Scripta Mater., 2012, vol. 66, pp. 1–4.10.1016/j.scriptamat.2011.08.005 ↗
36. W. Ludwig, A. King, P. Reischig, M. Herbig, E. Lauridsen, S. Schmidt, H. Proudhon, S. Forest, P. Cloetens, S. Rolland du Roscoat, J. Buffiere, T. Marrow, and H. Poulsen: Mater. Sci. Eng. A, 2009, vol. 524, pp. 69–76.10.1016/j.msea.2009.04.009 ↗
37. M. Herbig, A. King, P. Reischig, H. Proudhon, E. Lauridsen, J. Marrow, J.-Y. Buffière, and W. Ludwig: Acta Mater., 2011, vol. 59, pp. 590–601.10.1016/j.actamat.2010.09.063 ↗