Effect of Bonding Temperature on Phase Transformation of Diffusion-Bonded Joints of Duplex Stainless Steel and Ti-6Al-4V Using Nickel and Copper as Composite Intermediate Metals
Source abstract
Abstract
In the present study, the effect of bonding temperature on phase transformation of diffusion-bonded joints of duplex stainless steel (DSS) and Ti-6Al-4V (Ti64) using simultaneously both nickel (Ni) and copper (Cu) interlayers was investigated in the temperature range of 1148 K to 1223 K (875 °C to 950 °C) insteps of 25 K (25 °C) for 60 minutes under 4 MPa uniaxial pressure in vacuum. Interfaces were characterized by scanning electron microscopy and interdiffusion of the chemical species across the diffusion interfaces were witnessed by electron probe microanalysis. At 1148 K (875 °C), layer-wise Cu4Ti, Cu2Ti, Cu4Ti3, CuTi, and CuTi2 phases were observed at the Cu-Ti64 interface; however, DSS-Ni and Ni-Cu interfaces were free from any intermetallic. At 1173 K and 1198 K (900 °C and 925 °C), Cu interlayer could not restrict the diffusion of atoms from Ti64 to Ni, and vice versa; and Ni–Ti-based intermetallics were formed at the Ni-Cu interface and throughout the Cu zone as well; however, at 1223 K (950 °C), both Ni and Cu interlayers could not inhibit the diffusion of atoms from Ti64 to DSS, and vice versa. The maximum shear strength of ~377 MPa was obtained for the diffusion couple processed at 1148 K (875 °C) and strength of the bonded joints gradually decreased with the increasing bonding temperature due to the widening of brittle intermetallics at the diffusion zone. Fracture path indicated that failure took place through the Cu4Ti intermetallic at the Cu-Ti64 interface when bonding was processed at 1148 K (875 °C). When bonding was processed at 1173 K and 1198 K (900 °C and 925 °C), fracture took place through the Ni3Ti intermetallic at the Ni-(Ni + Cu + Ti64 diffusion reaction) interface; however, at 1223 K (950 °C), fracture morphology indicated the brittle nature and the fracture took place apparently through the σ phase at the DSS-(DSS + Ni + Cu + Ti64 diffusion reaction) interface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Hydrogen embrittlement and corrosion behaviors in metals · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. A. Elrefaey and W. Tillmann, J. Mater. Sci., 2010, vol. 45, pp. 4332–38.10.1007/s10853-010-4357-z ↗
2. E. Atasoy and N. Kahraman: Mater. Charact., 2008, vol. 59, pp. 1481–90.10.1016/j.matchar.2008.01.015 ↗
3. A. Laik, A.A. Shirzadi, G. Sharma, R. Tewari, T. Jayakumar, and G.K. Dey, Metall. Mater. Trans. A, 2015, vol. 46A, pp. 771–83.10.1007/s11661-014-2671-9 ↗
4. N. Özdemir, M. Aksoy, and N. Orhan: J. Mater. Process. Technol., 2003, vol. 141, pp. 228–33.10.1016/S0924-0136(03)00154-7 ↗
5. J.G. Lee, S.J. Hong, M.K. Lee, and C.K. Rhee: J. Nucl. Mater., 2009, vol. 395, pp. 145–49.10.1016/j.jnucmat.2009.10.045 ↗
6. M. Ferrante and E.V. Pigoretti: J. Mater. Sci., 2002, vol. 37, pp. 2825–33.10.1023/A:1015845822629 ↗
7. G.B. Kale, R.V. Patil, and P.S. Gawade: J. Nucl. Mater., 1998, vol. 257, pp. 44–50.10.1016/S0022-3115(98)00179-2 ↗
8. S. Kundu and S. Chatterjee: Mater. Sci. Eng., 2006, vol. 425A, pp. 107–13.10.1016/j.msea.2006.03.034 ↗
9. X.J. Yuan, G.M. Sheng, B. Qin, W.Z. Huang, and B. Zhou: Mater. Charact., 2008, vol. 59, pp. 930–36.10.1016/j.matchar.2007.08.003 ↗
10. S. Kundu and S. Chatterjee: Mater. Sci. Eng., 2008, vol. 480A, pp. 316–22.10.1016/j.msea.2007.07.033 ↗
11. B. Alemán, L. Gutiérrez, and J.J. Urcola: Mater. Sci. Technol., 1993, vol. 9, pp. 633–41.10.1179/mst.1993.9.8.633 ↗
12. A.M. Kliauga, D. Travessa, and M. Ferrante: Mater. Charact., 2001, vol. 46, pp. 65–74.10.1016/S1044-5803(00)00095-4 ↗
13. S. Kundu and S. Chatterjee: Mater. Charact., 2008, vol. 59, pp. 631–37.10.1016/j.matchar.2007.05.015 ↗
14. P. He, J. Zhang, R. Zhou, and X. Li: Mater. Charact., 1999, vol. 43, pp. 287–92.10.1016/S1044-5803(99)00008-X ↗
15. P. He, X. Yue, and J.H. Zhang: Mater. Sci. Eng. A, 2008, vol. 486A, pp. 171–76.10.1016/j.msea.2007.08.076 ↗
16. S. Kundu, S. Chatterjee, D. Olson, and B. Mishra: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2106–14.10.1007/s11661-008-9562-x ↗
17. P. He, J.-H. Zhang, and X.-Q. Li: Mater. Sci. Technol., 2001, vol. 17, pp. 1158–62.10.1179/026708301101511112 ↗
18. N. Orhan, T.I. Khan, and M. Eroğlu: Scripta Mater., 2001, vol. 45, pp. 441–46.10.1016/S1359-6462(01)01041-7 ↗
19. H.C. Dey, M. Ashfaq, A.K. Bhaduri, and K. Prasad Rao: J. Mater. Process. Technol., 2009, vol. 209, pp. 5862–70.10.1016/j.jmatprotec.2009.06.018 ↗
20. M. Gao, S.W. Mei, Z.M. Wang, X.Y. Li, and X.Y. Zeng: Sci. Technol. Weld. Joining, 2012, vol. 17, pp. 269–76.10.1179/1362171812Y.0000000002 ↗
21. T. Wang, B. Zhang, J. Feng, and Q. Tang: Mater. Charact., 2012, vol. 73, pp. 104–13.10.1016/j.matchar.2012.08.004 ↗
22. N. Özdemir and B. Bilgin: Int. J. Adv. Manuf. Technol., 2009, vol. 41, pp. 519–26.10.1007/s00170-008-1493-6 ↗
23. A. Elrefaey and W. Tillmann: J. Mater. Process. Technol., 2009, vol. 209, pp. 2746–52.10.1016/j.jmatprotec.2008.06.014 ↗
24. M.K. Lee, J.G. Lee, Y.H. Choi, D.W. Kim, C.K. Rhee, Y.B. Lee, and S.J. Hong: Mater. Lett., 2010, vol. 64, pp. 1105–08.10.1016/j.matlet.2010.02.024 ↗
25. R. Pederson: Microstructure and Phase Transformation of Ti-6Al-4V, Licentiate Thesis, Department of Applied Physics and Mechanical Engineering, Division of Engineering Materials, Luleå University of Technology, Sweden, 2002.
26. C. Charles: Modelling Microstructure Evolution of Weld Deposited Ti-6Al-4V, Licentiate Thesis, Department of Applied Physics and Mechanical Engineering, Division of Engineering Materials, Luleå University of Technology, Sweden, 2008.
27. R. Wanhill and S. Barter: Fatigue of Beta Processed and Beta Heat-treated Titanium Alloys, Springer, Dordrecht, 2012, pp. 5–10.10.1007/978-94-007-2524-9_2 ↗
28. P.A. Thornton and V.J. Colangelo: Fundamentals of Engineering Materials, 1st ed., Prentice-Hall, Englewood Cliffs, 1985, pp. 466–67.
29. P. Villars, A. Prince, and H. Okamoto: Handbook of Ternary Alloy Phase Diagrams, vol. 7, ASM International, Materials Park, OH, 1995.
30. S. Kundu, M. Ghosh, A. Laik, K. Bhanumurthy, G.B. Kale, and S. Chatterjee: Mater. Sci. Eng., 2005, vol. 407A, pp. 154–60.10.1016/j.msea.2005.07.010 ↗
31. T.B. Massalski, H. Okamoto, P.R. Subramanian, and L. Kacprzak: Binary Alloy Phase Diagrams, 2nd ed., ASM International, Materials Park, OH, 1990.
32. S. Kundu, S. Sam, B. Mishra, and S. Chatterjee: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 371–83.10.1007/s11661-013-1977-3 ↗
33. K.P. Gupta: Phase Diagrams of Ternary Nickel Alloys, Part I, The Indian Institute of Metals, Kolkata, 1990.
34. T.Y. Yang, R.K. Shiue, and S.K. Wu: Intermetallics, 2004, vol. 12, pp. 1285–92.10.1016/j.intermet.2004.03.020 ↗
35. J.A. van Beek, A.A. Kodentsov, and F.J.J. van Loo: J. Alloys Compd., 1995, vol. 217, pp. 97–103.10.1016/0925-8388(94)01302-X ↗
36. K.P. Gupta: J. Phase Equilib., 2002, vol. 23, pp. 541–47.10.1361/105497102770331299 ↗