journal article·2015-10Open access

Influence of Dynamic Compression on Phase Transformation of Martensitic NiTi Shape Memory Alloys

Ying Qiu, Marcus L. Young, Xu Nie

Abstract

Shape memory alloys (SMAs) exhibit high damping capacity in both austenitic and martensitic phases, due to either a stress-induced martensite phase transformation or a stress-induced martensite variant reorientation, making them ideal candidates for vibration suppression devices to protect structural components from damage due to external forces. In this study, both quasi-static and dynamic compression was conducted on a martensitic NiTi SMA using a mechanical loading frame and on a Kolsky compression bar, respectively, to examine the relationship between microstructure and phase transformation characteristics of martensitic NiTi SMAs. Both endothermic and exothermic peaks disappear completely after experiencing deformation at a strain rate of 103 s−1 and to a strain of about 10 pct. The phase transformation peaks reappear after the deformed specimens were annealed at 873 K (600 °C) for 30 minutes. As compared to samples from quasi-static loading, where a large amount of twinning is observed with a small amount of grain distortion and fracture, samples from dynamic loading show much less twinning with a larger amount of grain distortion and fracture.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. L. Janke: Mater. Struct., 2005, vol. 38 (279), pp. 578-92.10.1617/14323 ↗
2. G. Song, N. Ma and H. N. Li: Eng. Struct., 2006, vol. 28 (9), pp. 1266-74.10.1016/j.engstruct.2005.12.010 ↗
3. J. Van Humbeeck: Mater. Sci. and Eng. A, 1999, vol. 273, pp. 134-48.10.1016/S0921-5093(99)00293-2 ↗
4. T.W. Duerig, A. Pelton, and D. Stöckel: Mater. Sci. and Eng. A, 1999, vol. 273, pp. 149-60.10.1016/S0921-5093(99)00294-4 ↗
5. L.G. Machado and M.A. Savi: Braz. J. Med. Biol. Res., 2003, vol. 36 (6), pp. 683-91.10.1590/S0100-879X2003000600001 ↗
6. L. Petrini and F. Migliavacca: J. Metall., 2011, vol. 2011, pp. 1-15.10.1155/2011/501483 ↗
7. N. B. Morgan: Mater. Sci. and Eng. A, 2004, vol. 378 (1-2), pp. 16-23.10.1016/j.msea.2003.10.326 ↗
8. A. Biscarini, G. Mazzolai, and A. Tuissi: Recent Pat. Biomed. Eng., 2008, vol. 1 (3), pp. 180-96.10.2174/1874764710801030180 ↗
9. O. Benafan, J. Brown, F. T. Calkins, P. Kumar, A. P. Stebner, T. L. Turner, R. Vaidyanathan, J. Webster, and M. L. Young: Int. J. Mech. Mater. Des., 2013, vol. 10 (1), pp. 1-42.10.1007/s10999-013-9227-9 ↗
10. E. T. F. Chau, C. M. Friend, D. M. Allen, J. Hora, and J. R. Webster: Mater. Sci. and Eng. A, 2006, vol. 438-440, pp. 589-92.10.1016/j.msea.2006.02.201 ↗
11. DJ Hartl, DC Lagoudas, FT Calkins, JH Mabe: Smart Mater. Struct. 2010, 19(1), 015020.10.1088/0964-1726/19/1/015020 ↗
12. K. Otsuka and X. Ren: Intermetallics, 1999, vol. 7 (5), pp. 511-28.10.1016/S0966-9795(98)00070-3 ↗
13. K. Otsuka and X. Ren: Prog. Mater. Sci., 2005, vol. 50 (5), pp. 511-678.10.1016/j.pmatsci.2004.10.001 ↗
14. K. Otsuka and C. M. Wayman: Shape Memory Materials. (Cambridge University Press, Cambridge, 1999).
15. M. L. Young, M. F. X. Wagner, J. Frenzel, W. W. Schmahl, and G. Eggeler: Acta Mater., 2010, vol. 58 (7), pp. 2344-54.10.1016/j.actamat.2009.12.021 ↗
16. J. Ryhänen, E. Niemi, W. Serlo, E. Niemelä, P. Sandvik, H. Pernu, and T. Salo: J. Biomed. Mater. Res., 1997, vol. 35 (4), pp. 451-57.10.1002/(SICI)1097-4636(19970615)35:4<451::AID-JBM5>3.0.CO;2-G ↗
17. S.A. Shabalovskaya: Bio-Med. Mater. Eng., 2002, vol. 12 (1), pp. 69-109.
18. L. Tan: Biomaterials, 2003, vol. 24 (22), pp. 3931-39.10.1016/S0142-9612(03)00271-0 ↗
19. C.P. Frick, A.M. Ortega, J. Tyber, A. El M. Maksound, H.J. Maier, Y. Liu, and K. Gall: Mater. Sci. Eng. A, 2005, vol. 405 (1-2), pp. 34-49.10.1016/j.msea.2005.05.102 ↗
20. Y. Liu and P.G. McCormick: Acta Metall. Mater., 1994, vol. 42 (7), pp. 2401-06.10.1016/0956-7151(94)90318-2 ↗
21. J.A. Shaw and S. Kyriakides: J. Mech. Phys. Solids, 1995, vol. 43 (8), pp. 1243-81.10.1016/0022-5096(95)00024-D ↗
22. S. Mändl, D. Krause, G. Thorwarth, R. Sader, F. Zeilhofer, H.H. Horch, and B. Rauschenbach: Surf. Coat. Technol., 2001, vol. 142, pp. 1046-50.10.1016/S0257-8972(01)01066-0 ↗
23. P. Sevilla, F. Martorell, C. Libenson, J. A. Planell, and F. J. Gil: J. Mater. Sci. Mater. Med., 2008, vol. 19 (2), pp. 525-9.10.1007/s10856-007-0164-8 ↗
24. E. Choi, Y. Chung, J. Choi, H. Kim, and H. Lee: Smart Mater. Struct., 2010, vol. 19 (3), p. 035024.10.1088/0964-1726/19/3/035024 ↗
25. M. Frotscher, J. Burow, P. Schön, K. Neuking, R. Böckmann, and G. Eggeler: Materialwiss. Werkstofftech., 2009, vol. 40 (1-2), pp. 17-22.10.1002/mawe.200800379 ↗
26. B. Kockar, I. Karaman, J. I. Kim and Y. Chumlyakov: Scr. Mater., 2006, vol. 54 (12), pp. 2203-08.10.1016/j.scriptamat.2006.02.029 ↗
27. J.L. Lemanski, V.B. Krishnan, R.M. Manjeri, W.U. Notardonato, and R. Vaidyanathan, In Advances in Cryogenic Engineering, (AIP Publishing, Melville, 2006), pp 3-10.
28. D.A. Miller and D.C. Lagoudas: Smart Mater. Struct., 2000, 9(5):640.10.1088/0964-1726/9/5/308 ↗
29. S. Nemat-Nasser, J.Y. Choi, W. Guo, J.B. Isaacs, and M. Taya: J. Eng. Mater. Technol., 2005, 127(1):83.10.1115/1.1839215 ↗
30. S. Nemat-Nasser and W. Guo: Mech. Mater., 2006, vol. 38 (5-6), pp. 463-74.10.1016/j.mechmat.2005.07.004 ↗
31. S. Nemat-Nasser, J. Choi, W. Guo, and J.B. Isaacs: Mech. Mater., 2005, vol. 37 (2-3), pp. 287-98.10.1016/j.mechmat.2004.03.007 ↗
32. W. Chen and S. Bo: Journal of Mechanics of Materials and Structures, 2006, vol. 1 (2), pp. 339-56.10.2140/jomms.2006.1.339 ↗
33. B. Song: Exp. Mech., 2004, vol. 44 (6), pp. 622-27.10.1007/BF02428252 ↗
34. S.P. Belyaev, N.F. Morozov, A.I. Razov, A.E. Volkov, L.Wang, S. Shi, S. Gan, J. Chen, and X. Dong, In Materials Science Forum, (Trans Tech Publications: Dürnten 2002), pp 337-40.
35. W. Guo, J. Su, Y. Su, and S.Y. Chu: J. Alloys Compd., 2010, vol. 501 (1), pp. 70-76.10.1016/j.jallcom.2010.04.031 ↗
36. W. Chen, Q. Wu, J.H. Kang, and N.A. Winfree: Int. J. Solids Struct., 2001, vol. 38 (50), pp. 8989-98.10.1016/S0020-7683(01)00165-2 ↗
37. R.R. Adharapurapu, F. Jiang, K.S. Vecchio, and G.T. Gray: Acta Mater., 2006, vol. 54 (17), pp. 4609-20.10.1016/j.actamat.2006.05.047 ↗
38. H. Date, In Materials science forum, (Trans Tech Publications, Dürnten, 2007), p 3231.
39. A. Bragov, A. Galieva, V. Grigorieva, A. Danilov, A. Konstantinov, A. Lomunov, A. Motorin, E. Ostropiko, and A. Razov, Materials Science Forum, (Trans Tech Publications, Dürnten, 2013), pp 326-31.
40. J. McCormick and R. DesRoches: Proceedings of the 2004 Structures Congress, 2004, pp. 22–26.
41. R. DesRoches and M. Delemont: Eng. Struct., 2002, vol. 24 (3), pp. 325-32.10.1016/S0141-0296(01)00098-0 ↗
42. J. Frenzel, E.P. George, A. Dlouhy, C. Somsen, M. F. X. Wagner, and G. Eggeler: Acta Mater.,, 2010, vol. 58 (9), pp. 3444-58.10.1016/j.actamat.2010.02.019 ↗
43. Y. Liu, Y. Liu, and J.Van Humbeeck: Acta Mater., 1998, vol. 47 (1), pp. 199-209.10.1016/S1359-6454(98)00325-5 ↗
44. Z. Xie, Y. Liu, and J. Van Humbeeck: Acta Mater., 1998, 46(6):1989-2000.10.1016/S1359-6454(97)00379-0 ↗
45. Y. Liu, Z. Xie, J. Van Humbeeck, and L. Delaey: Acta Mater., 1998, vol. 46 (12), pp. 4325-38.10.1016/S1359-6454(98)00112-8 ↗
46. I. Karaman, H.E. Karaca, Z.P. Luo, and H.J. Maier: Metall. Mater. Trans. A, 2003, vol. 34 (11), pp. 2527-39.10.1007/s11661-003-0012-5 ↗
47. Y. Liu, Y. Li, K.T. Ramesh, and J. Van Humbeeck: Scr. Mater., 1999, vol. 41 (1), pp. 89-95.10.1016/S1359-6462(99)00058-5 ↗
48. H. Nakayama, Y. Zhao, M. Taya, W. W. Chen, Y. Urushiyama, and S. Suzuki, In Smart Structures and Materials, (International Society for Optics and Photonics, Orlando, 2005), pp 355-63.
49. Y. Liu, Y. Li, and K.T. Ramesh: Philos. Mag. A, 2002, vol. 82 (12), pp. 2461-73.10.1080/01418610208240046 ↗
50. Y. Liu, J. Van Humbeeck, R. Stalmans, and L. Delaey: J. Alloys Compd., 1997, vol. 247 (1), pp. 115-21.10.1016/S0925-8388(96)02572-8 ↗
51. X. Huang and Y. Liu: Scr. Mater., 2001, vol. 45 (2), pp. 153-60.10.1016/S1359-6462(01)01005-3 ↗
52. Y. Liu and H. Xiang: J. Alloys Compd., 1998, vol. 270 (1), pp. 154-59.10.1016/S0925-8388(98)00500-3 ↗
53. P. Šittner, M. Landa, P. Lukáš, and V. Novak: Mech. Mater., 2006, vol. 38 (5), pp. 475-92.10.1016/j.mechmat.2005.05.025 ↗
54. J.I. Kim, Y. Liu, and S. Miyazaki: Acta Mater., 2004, vol. 52 (2), pp. 487-99.10.1016/j.actamat.2003.09.032 ↗
55. T. Sakuma, Y. Mihara, H. Toyama, Y. Ochi, and K. Yamauchi: Mater. Trans., 2006, 47(3):787.10.2320/matertrans.47.787 ↗
56. P. Sittner, Y. Liu, and V. Novak: J. Mech. Phys. Solids, 2005, vol. 53 (8), pp. 1719-46.10.1016/j.jmps.2005.03.005 ↗
57. K.N. Melton and O. Mercier: Acta Metall., 1981, vol. 29 (2), pp. 393-98.10.1016/0001-6160(81)90165-6 ↗
58. G.M. Michal and R Sinclair: Acta Crystallogr., Sect. B: Struct. Crystallogr. Cryst. Chem., 1981, vol. 37 (10), pp. 1803-07.10.1107/S0567740881007292 ↗
59. H. Hughes: J. Iron Steel Inst., 1965, 203(10):1019-23.
60. G.A. Yurko, J.W. Barton, and J. Gordon Parr: Acta Crystallogr., 1959, vol. 12 (11), pp. 909-11.10.1107/S0365110X59002559 ↗
61. T. Goryczka and H. Morawiec: J. Alloys Compd., 2004, vol. 367 (1), pp. 137-41.10.1016/j.jallcom.2003.08.025 ↗
62. P. Scherrer: Nachrichten von der Gesellschaft der Wissenschaften zu Göttingen, mathematisch-physikalische Klasse, 1918, vol. 1918, pp. 98-100.
63. A. Patterson: Phys. Rev., 1939, vol. 56 (10), pp. 978-82.10.1103/PhysRev.56.978 ↗