Design and Characterization of a Heat-Resistant Ferritic Steel Strengthened by MX Precipitates
Source abstract
Abstract
The long-term performance of current heat-resistant ferritic steels used in steam generators is primarily limited by microstructure degradation as a result of coarsening or transformation of precipitates. To improve the microstructural stability, a heat-resistant ferritic steel was designed via computational thermodynamics to exclusively contain metal carbonitride (MX) precipitates as the primary means for strengthening at elevated temperatures. The volume fraction of precipitates is 0.35 vol pct, about one-seventh of P91. These MX precipitates are either V-rich or Nb-rich with plate-like or spheroidal morphology, respectively. The precipitate size remains almost constant at 973 K for up to 3000 hours aging. Electron diffraction analysis revealed a Baker-Nutting orientation relationship between the precipitate and the matrix. Consistent with the thermodynamics-based design, M23C6-, Laves-, and Z phase were not detected. The creep threshold stress, derived from high-temperature compressive creep tests, are evaluated to be 63 ± 1 and 43 ± 2 MPa at 923 K and 973 K, respectively, on par with or slightly better than P91. This study reveals that MX precipitates in ferritic steels coarsen slowly at temperatures up to 973 K and that a relatively small volume fraction of MX precipitates can provide effective long-term creep performance at elevated temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. F. Masuyama: ISIJ Int., 2001, vol. 41, pp. 612-25.10.2355/isijinternational.41.612 ↗
2. R. Viswanathan: Adv. Mater. Processes, 2004, vol. 162, pp. 73-76.
3. F. Abe: Engineering, 2015, vol. 1 pp. 211-224.10.15302/J-ENG-2015031 ↗
4. Abe F, Kern TU, Ramaswamy V (2008) Creep-resistant steels. Elsevier, Amsterdam, pp. 15-70.10.1533/9781845694012 ↗
5. V. Dudko, A. Belyakov, D. Molodov, and R. Kaibyshev: Metall. Mater. Trans. A, 2013, vol. 44, pp. 162–72.10.1007/s11661-011-0899-1 ↗
6. I. Fedorova, A. Kipelova, A. Belyakov, and R. Kaibyshev: Metall. Mater. Trans. A, 2013, vol. 44, pp. 128–35.10.1007/s11661-012-1182-9 ↗
7. Chen R, Armaki HG, Maruyama K, Igarashi M (2011) Mater. Sci. Eng., A 528:4390–94.10.1016/j.msea.2011.02.060 ↗
8. M. Taneike, K. Sawada, and F. Abe: Metall. Mater. Trans. A, 2004, vol. 35, pp. 1255–62.10.1007/s11661-004-0299-x ↗
9. Sakthivel T, Selvi SP, Laha K (2015) Mater. Sci. Eng., A 640:61–71.10.1016/j.msea.2015.05.068 ↗
10. J. Hald: Steel Res. Int., 1996, vol. 67, pp. 369–74.10.1002/srin.199605503 ↗
11. P.J. Ennis and A. Czyrska-Filemonowicz: Sadhana, 2003, vol. 28, pp. 709–30.10.1007/BF02706455 ↗
12. J. Zhao, J. Gong, A. Saboo, D.C. Dunand, and G.B. Olson: Acta Mater., 2018, vol. 149, pp. 19–28.10.1016/j.actamat.2018.02.001 ↗
13. Sawada K, Kushima H, Tabuchi M, Kimura K (2011) Mater. Sci. Eng., A 528:5511–18.10.1016/j.msea.2011.03.073 ↗
14. Panait CG, Zielińska-Lipiec A, Koziel T, Czyrska-Filemonowicz A, Gourgues-Lorenzon AF, Bendick W (2010) Mater. Sci. Eng A 527:4062–4069.10.1016/j.msea.2010.03.010 ↗
15. K, Maruyama, K. Sawada, and J.I. Koike: ISIJ Int., 2001, vol. 41, pp. 641-53.10.2355/isijinternational.41.641 ↗
16. J. Hald, and L. Korcakova: ISIJ Int., 2003, vol. 43, pp. 420-27.10.2355/isijinternational.43.420 ↗
17. L. Cipolla, H.K. Danielsen, D. Venditti, P.E. Di Nunzio, J. Hald, and M.A. Somers: Acta Mater., 2010, vol. 58, pp. 669-79.10.1016/j.actamat.2009.09.045 ↗
18. P. Ennis, A. Zielinska-Lipiec, O. Wachter, and A. Czyrska-Filemonowicz: Acta Mater., 1997, vol.45, pp. 4901–07.10.1016/S1359-6454(97)00176-6 ↗
19. Yoshizawa M, Igarashi M, Moriguchi K, Iseda A, Armaki HG, Maruyama K (2009) Mater. Sci. Eng., A 510:162–68.10.1016/j.msea.2008.05.055 ↗
20. K. Sawada, H. Kushima, M. Tabuchi, and K. Kimura: Mater. Sci. Technol., 2014, vol. 30, pp. 12–16.10.1179/1743284713Y.0000000309 ↗
21. Strang A, Vodarek V (1996) Mater. Sci. Technol 12:552–5610.1179/mst.1996.12.7.552 ↗
22. H.K. Danielsen: Mater. Sci. Technol., 2016, vol. 32, pp. 126–37.10.1179/1743284715Y.0000000066 ↗
23. H.K. Danielsen and J. Hald: VGB Powertech, 2009, vol. 5, pp. 68–73.
24. V. Sklenička, K. Kuchařová, M. Svoboda, L. Kloc, J. Buršık, and A. Kroupa: Mater. Charact., 2003, vol. 51, pp. 35-48.10.1016/j.matchar.2003.09.012 ↗
25. K. Sawada, H. Kushima, and K. Kimura: ISIJ Int., 2006, vol. 46, pp. 769–75.10.2355/isijinternational.46.769 ↗
26. Rojas D, Garcia J, Prat O, Sauthoff G, Kaysser-Pyzalla AR (2011) Mater. Sci. Eng., A 528:5164–76.10.1016/j.msea.2011.03.037 ↗
27. Elarbi Y, Palotás B (2007) Period Polytech Mech Eng 51:33-38.10.3311/pp.me.2007-1.05 ↗
28. F. Abe: Sci. Technol. Adv. Mater., 2008, vol. 9, pp. 013002.10.1088/1468-6996/9/1/013002 ↗
29. F. Liu, D.H. Fors, A. Golpayegani, H.O. Andrén, and G. Wahnström: Metall. Mater. Trans. A, 2012, vol. 43, pp. 405362.
30. F. Abe, M. Tabuchi, H. Semba, M. Igarashi, M. Yoshizawa, N. Komai, and A. Fujita: In 5th International Conference on Advances in Materials Technology for Fossil Power Plants, 2007, pp. 3–5.
31. Abe F, Horiuchi T, Taneike M, Sawada K (2004) Mater. Sci. Eng., A 378:299–303.10.1016/j.msea.2003.11.073 ↗
32. J. Hald: Trans. Indian Inst. Met., 2016, vol. 69, pp. 183-88.10.1007/s12666-015-0793-4 ↗
33. Yan P, Liu Z, Bao H, Weng Y, Liu W (2013) Mater. Sci. Eng., A, 588:22–28.10.1016/j.msea.2013.09.033 ↗
34. M. Taneike, F. Abe, and K. Sawada: Nature, 2003, vol. 424, pp. 294.10.1038/nature01740 ↗
35. F. Yin and W. Jung: Metall. Mater. Trans. A, 2009, vol. 40, pp. 302–09.10.1007/s11661-008-9716-x ↗
36. F. Yin, W. Jung, and S.H. Chung: Scripta Mater., 2007, vol. 57, pp. 469–72.10.1016/j.scriptamat.2007.05.034 ↗
37. F. Abe, M. Taneike, and K. Sawada: Int. J. Pres. Ves. Pip, 2007, vol. 84, pp. 3-12.10.1016/j.ijpvp.2006.09.003 ↗
38. H. Wang, W. Yan, S. van Zwaag, Q. Shi, W. Wang, K. Yang, and Y. Shan: Acta Mater., 2017, vol. 134, pp. 143-54.10.1016/j.actamat.2017.05.069 ↗
39. Z. Sun, C. H. Liebscher, S. Huang, Z. Teng, G. Song, G. Wang, M. Asta, M. Rawlings, M. E. Fine, and P. K. Liaw: Scripta Mater., 2013, vol. 68, pp. 384-88.10.1016/j.scriptamat.2012.10.040 ↗
40. N.Q. Vo, C.H. Liebscher, M.J. Rawlings, M. Asta, and D.C. Dunand: Acta Mater., 2014, vol. 71, pp. 89-99.10.1016/j.actamat.2014.02.020 ↗
41. C.H. Liebscher, V. Radmilovic, U. Dahmen, M. Asta, and G. Ghosh: J. Mater. Sci., 2013, vol. 48, pp. 2067-75.10.1007/s10853-012-6980-3 ↗
42. G. Song, Z. Sun, L. Li, X. Xu, M. Rawlings, C.H. Liebscher, B. Clausen, J. Poplawsky, D.N. Leonard, S. Huang, and Z. Teng: Sci. Rep., 2015, vol. 5, pp. 16327.10.1038/srep16327 ↗
43. C.T. Gross, D. Isheim, S. Vaynman, M.E. Fine, and Y.W. Chung: Metall. Mater. Trans. A, 2018, vol. 50, pp. 209-19.10.1007/s11661-018-4985-5 ↗
44. H.J. Kestenbach, E.V. Morales: Acta Microsc., 1998, vol. 7, pp. 22–33.
45. Yang ZG, Enomoto M (2002) Mater. Sci. Eng., A 332:184–192.10.1016/S0921-5093(01)01729-4 ↗
46. I.M. Lifshitz and V.V. Slyozov: J. Phys. Chem. Solids, 1961, vol. 9, pp. 35–50.10.1016/0022-3697(61)90054-3 ↗
47. Wagner C (1961) Z Elektrochem Ber Bunsenges Phys Chem 65:581–591.
48. R.C. Dimitriu and H. Bhadeshia: Mater. Sci. Technol., 2007, vol. 23, pp. 1127-31.10.1179/174328407X213332 ↗
49. Ghosh G, Olson G (2002) Acta Mater 50:2655–227510.1016/S1359-6454(02)00096-4 ↗
50. H.J. Frost and M.F. Ashby: Deformation mechanism map, Oxford: Pergamon Press, 1982.
51. F. Masuyama: Int. J. Press. Ves. Pip., 2007, vol. 84, pp. 53-61.10.1016/j.ijpvp.2006.09.006 ↗
52. R.S.W. Shewfelt, and L.M. Brown: Philos. Mag., 1977, vol. 35, pp. 945-62.10.1080/14786437708232636 ↗
53. R. Lagneborg: Scripta Metall., 1973, vol. 7, pp. 605-13.10.1016/0036-9748(73)90222-6 ↗
54. R. Lagneborg and B. Bergman: Met. Sci., 1976, vol. 10, pp. 20-28.10.1179/030634576790431462 ↗
55. M.E. Kassner: Fundamentals of creep in metals and alloys, Butterworth-Heinemann, Oxford, 2015.
56. J. Rösler and E. Arzt: Acta Metall., 1988, vol. 36, pp. 1043–51.10.1016/0001-6160(88)90158-7 ↗
57. E. Arzt and M.F. Ashby: Scripta Metall., 1982, vol. 16, pp. 1285–90.10.1016/0036-9748(82)90484-7 ↗
58. E. Arzt and J. Rösler: Acta Metall., 1988, vol. 36, pp. 1053–60.10.1016/0001-6160(88)90159-9 ↗
59. J. Rösler and E. Arzt: Acta Metall., 1990, vol. 38, pp. 671–83.10.1016/0956-7151(90)90223-4 ↗
60. E.A. Marquis and D.C. Dunand: Scripta Mater., 2002, vol. 47, pp. 503–08.10.1016/S1359-6462(02)00165-3 ↗
61. M.E. Krug and D.C. Dunand: Acta Mater., 2011, vol. 59, pp. 5125-34.10.1016/j.actamat.2011.04.044 ↗