An Analytical Model for Prediction of Solidification Cracking Susceptibility in Aluminum Alloys Taking into Account the Effect of Solidification Rate
Source abstract
Abstract
Solidification cracking in pulsed laser welding of aluminum alloys has been the subject of a number of researches. The purpose of this study is to analyze the possible effects of high solidification rates involved in pulsed laser welding on the solidification path of aluminum alloys and solidification cracking sensitivity. For the analysis, conditions at the interface are not necessarily considered to be at equilibrium. Accordingly, the solidification path is modified taking into account the effects of solidification rate on the solidus, liquidus, and eutectic temperatures, the liquidus slope, and the interface parameters, including the partition coefficient, the cell/dendrite tip radius, and the liquid composition in the cellular dendrite tip. In line with the previous researches, cracking susceptibility is assumed to be proportional to the range of temperature squared for solidification crack formation ( $$ \Delta T2 $$ ). The results of calculations for hypo-eutectic Al-Cu alloys show that cracking susceptibility increases and shifts to a higher copper composition with the increasing solidification rate. The given calculations are evaluated against the reported experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. M. Sheikhi, F.M. Ghaini and H. Assadi, Acta Mater., 2015, vol. 82, pp. 491–502.10.1016/j.actamat.2014.09.002 ↗
2. J. Liu, S. Kou, Acta mater., 2017, vol.125, pp. 513-523.10.1016/j.actamat.2016.12.028 ↗
3. M. Flemings (1929) Solidification processing Series in Materials Science and Engineering. McGraw-Hill, New York, pp. 167-170.
4. M. Aziz (1988) Mater. Sci. Eng. vol. 98, pp. 369-372.10.1016/0025-5416(88)90188-7 ↗
5. M. Aziz (1996) Met. Mater. Trans. A, 27:671-686.10.1007/BF02648954 ↗
6. S.L. Sobolev, Physica. Status Solidi. a, 1996, vol.156, pp. 293-303.10.1002/pssa.2211560208 ↗
7. S.L. Sobolev, Acta Mater, 2012, vol.60, pp. 2711-2718.10.1016/j.actamat.2012.01.036 ↗
8. M. Carrard, M.Gremaud, M. Zimmermann, W. Kurz, Acta mater, 1992, vol.40, pp. 938-996.
9. J.Y. Choi: Phase-Field Investigation on the Non-equilibrium Interface Dynamics of Rapid Alloy Solidification, PhD thesis, Iowa State University, 2011.10.2172/1029612 ↗
10. DM Stefanescu (2015) Thermodynamic concept-equilibrium and non-equilibrium during solidification. In: Science and Engineering of Casting Solidification. Springer, Basel, pp. 7–26.10.1007/978-3-319-15693-4_2 ↗
11. W. Kurz, B. Giovanola and R. Trivedi, Acta mater, 1986, vol. 34, pp. 823-830.10.1016/0001-6160(86)90056-8 ↗
12. H. Zhao, D. R. White, T. Debroy, International Materials Reviews, 1999, vol. 44, pp. 238-266.10.1179/095066099101528298 ↗
13. S. Li: Hot Tearing in Cast Aluminum Alloys: Measures and Effects of Process Variables, PhD thesis, Worcester Polytechnic Institute, 2010.
14. W. Yoon, International journal of Korean welding society, 2001, vol.1, pp. 63-70.
15. J. A. Spittle, A. A. Cushway, Met. Technol., 1983, vol.10, pp. 6-13.10.1179/030716983803291226 ↗
16. E.J. Michaud, H.W. Kerr, and D.C. Weckman: Proceedings of the 4th International Conference, Gatlinburg, Tennessee, 1995, pp. 153–58.
17. S. Kou, Acta mater, 2015, vol. 88, pp. 366-374.10.1016/j.actamat.2015.01.034 ↗
18. J. Liu, S. Kou, Acta mater, 2015, vol. 100, pp. 359-368.10.1016/j.actamat.2015.08.064 ↗
19. S. Katayama, M. Mizutani, A. Matsunawa (1997) Sci. Technol. Weld. Join. vol. 2, pp. 1-9.10.1179/stw.1997.2.1.1 ↗
20. S.G. Gill, W. Kurz, Acta Mater., 1995, vol.43, pp. 139-151.
21. A. Zryd, M. Gremaud and W. Kurz, Mater. Sci. Eng., 1994, vol.181A/182A, pp. 1392-1396.10.1016/0921-5093(94)90871-0 ↗
22. R. Trivedi, P. Magnin and W. Kurz, Acta Mater., 1987, vol.35, pp. 971-980.10.1016/0001-6160(87)90176-3 ↗
23. M. Zimmermann, M. Carrad, W. Kurz, Acta Mater., 1989, vol.37, pp. 3305-3313.10.1016/0001-6160(89)90203-4 ↗
24. W. Kurz, D. J. Fisher, Fundamental of Solidification, Third edition, Trans Tech Publications, Zurich, 1992, pp. 133-300.
25. B. Weiand D. M. Herlach (1994) Mater. Sci. Eng., vol. 181–182, pp. 1150-1155.
26. J.W. Elmer, T.W. Eagar, and S.M. Allen: Proc. of the Materials Weldability Symposium, ASM International, Materials Park, 1990, vol. 143, pp. 143–50.
27. S. C. Gill, W. Kurz, Acta metal. Mater. Vol. 43, No. 1, pp.139-151, 1995
28. M. Zimmermann, M. Carrard, M. Gremaud and W. Kurz, Acta mater, 1991, vol. A134, pp. 1278- 1282.
29. M. Gremaud, M. Carrard and W. Kurz, Acta Metal. Mater, vol. 39, No. 7, pp.1431-1443, 1991.10.1016/0956-7151(91)90228-S ↗
30. Y. M. Zhang, C. Pan, A.T. Male, Met. Mater. Trans. A, 2000, vol. 31A, pp. 2537-2543.10.1007/s11661-000-0198-8 ↗
31. S. C. Gill, M. Zimmermann, W. Kurz, Acta Mater., 1992, vol.40, pp. 2895-2906.10.1016/0956-7151(92)90454-M ↗
32. Y. M. Zhang, C. Pan, A.T. Male, Met. Mater. Trans. A, 2000, vol.31A, pp. 2537-2543.10.1007/s11661-000-0198-8 ↗
33. F. Caiazzoa, V. Alfieria, F. Cardaropolia, and V. Sergi: SPIE Proceedings: High Power Laser Materials Processing: Lasers, Beam Delivery, Diagnostics, and Applications, vol. 82390E, E. Beyer and T. Morris, eds., 2012.
34. M. Rappaz, J. M. Drezet, and M. Gremaud, Met. Mater. Trans. A, 1999, vol. 30A, pp. 449-55.10.1007/s11661-999-0334-z ↗
35. A. Stangeland, A. Mo, Ø. Nielsen, D. Eskin, M. M’Hamdi, Met. Mater. Trans. A, 2004, vol. 35A, p. 2903–2915.10.1007/s11661-004-0238-x ↗
36. M. Sistaninia, A.B. Phillionb, J.-M. Drezet, M. Rappaz, Acta Mater., 2012, vol. 60A pp. 3902.10.1016/j.actamat.2012.03.036 ↗
37. N. Wang, S. Mokadem, M. Rappaz, W. Kurz, Acta Mater., 2004, vol.52, pp. 3173.10.1016/j.actamat.2004.03.047 ↗
38. M. M’Hamdi, A. Mo, C.L. Martin, Met. Mater. Trans. A, 1999, vol. 33, pp. 2081–93.
39. E.J. Michaud, H.W. Kerr, and D.C. Weckman: Proceedings of the 4th International Conference, Gatlinburg, Tennessee, 1995, pp. 153–58.
40. Suitno, W. H. Kool, L. Katgerman, Met. Mater. Trans. A, 2005, vol. 36A, pp. 1537-154610.1007/s11661-005-0245-6 ↗
41. L. Katgerman, JOM, 1982, vol. 2, pp. 46–49.10.1007/BF03339110 ↗
42. G. X. Wang, V. Prasad, and S. Sampath, Met. Mater. Trans. A, 2000, vol. 31A, pp. 735-746.10.1007/s11661-000-0015-4 ↗
43. L. Sobolev, Acta Mater, 2012, vol. 60, pp. 2711–271810.1016/j.actamat.2012.01.036 ↗
44. W. Kurz, B. Giovanola and R. Trivedi, Acta Mater., 1986, vol.34, pp. 823-830.10.1016/0001-6160(86)90056-8 ↗