journal article·2019-05-15

Dissolution of the Alpha Phase in Ti-6Al-4V During Isothermal and Continuous Heat Treatment

S. L. Semiatin, M. Obstalecki, E. J. Payton, A. L. Pilchak, P. A. Shade, N. C. Levkulich, J. M. Shank, D. C. Pagan, F. Zhang, J. S. Tiley

Publisher page

Abstract

The kinetics of the dissolution of the equiaxed alpha phase into the beta matrix in Ti-6Al-4V were established and modeled for both isothermal (constant temperature) and transient/continuous heating conditions. For the isothermal experiments, samples were solution treated at a subtransus temperature to equilibrate the microstructure followed by rapid, direct-resistance heating to a temperature either 25 K or 78 K (25 °C or 78 °C) above the equilibrium beta transus and held for times ranging from 1 to 32 seconds. Dissolution behavior under transient conditions was determined in-situ using an indirect-resistance furnace and X-ray (synchrotron) source; these trials comprised a similar initial subtransus solution heat treatment followed by continuous heating at a constant rate in the range between 15 and 135 K/min (15 and 135 °C/min) to a temperature lying 25 K (25 °C) above the transus. Measurements of the temporal evolution of the volume fraction of alpha were interpreted using numerical simulations based on the Whelan dissolution model modified to treat a distribution of particle sizes and the possible interaction of the concentration gradients developed around adjacent particles; i.e., soft impingement. The isothermal dissolution measurements were bounded by predictions from simulations with and without the soft-impingement assumption. Similar trends were found for continuous-heating behavior. In particular, slow or fast heating-rate observations were replicated by simulation predictions with or without the soft-impingement constraint, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. A.L. Pilchak, G.A. Sargent, and S.L. Semiatin: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 908-919.10.1007/s11661-017-4444-8 ↗
2. P.R. Rios: Acta Mater., 1997, vol. 45, pp. 1785-1789.10.1016/S1359-6454(96)00284-4 ↗
3. S.L. Semiatin, K.E. McClary, A.D. Rollett, C.G. Roberts, E.J. Payton, F. Zhang, and T.P. Gabb, Metall. and Mater. Trans. A, 2013, vol. 44A, pp. 2778-2798.10.1007/s11661-013-1675-1 ↗
4. J. Gayda, T.P. Gabb, and P.T. Kantzos: Superalloys 2004, eds. K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, TMS, Warrendale, PA, 2004, pp. 323–30.
5. S.L. Semiatin and D.R. Barker, “Rapid Heat Treatment of Nonferrous Metals and Alloys to Obtain Graded Microstructures,” US Patent 5447580, September 1995.
6. V.A. Gridnev, O.M. Ivasishin, and P.E. Markovskii: Metal Sci. Heat Treatment, 1985, vol. 25, pp. 43-48.10.1007/BF00741888 ↗
7. O.M. Ivasishin and S.L. Semiatin: Proc. THERMEC 2000, T. Chandra, ed., Elsevier Science Ltd., Amsterdam, Netherlands, 2001.
8. D.W. Mahaffey, O.N. Senkov, R. Shivpuri, and S.L. Semiatin: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 3981-4000.10.1007/s11661-016-3600-x ↗
9. O.N. Senkov, D.W. Mahaffey, and S.L. Semiatin: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 5428–5444.10.1007/s11661-018-4853-3 ↗
10. D.L. Baty, R.A. Tanzilli, and R.W. Heckel: Metall. Trans., 1970, vol. 1, pp. 1651-1656.10.1007/BF02642012 ↗
11. J. Cormier, X. Milhet, and J. Mendez: J. Mater. Sci., 2007, vol. 42, pp. 7780-778610.1007/s10853-007-1645-3 ↗
12. E.J. Payton, T.A. Wynn, and M.J. Mills: J. Mater. Sci., 2012, vol. 20, pp. 7305-731110.1007/s10853-012-6684-8 ↗
13. F. Masoumi, M. Jahazi, D. Shahriari, and J. Cormier: J. Alloys Comp., 2016, vol. 658, pp. 981-99510.1016/j.jallcom.2015.11.002 ↗
14. J.M. Papzian: Metall. Trans. A, 1982, vol. 13A, pp. 761-769.10.1007/BF02642389 ↗
15. A. Luo, D.J. Lloyd, A. Gupta, and W.V. Youdelis: Acta Metal. Mater., 1993, 41, 769-776.10.1016/0956-7151(93)90009-H ↗
16. M. Soucail and Y. Bienvenu: Mater. Sci. Eng. A, 1996, vol. A220, pp. 215-222.10.1016/S0921-5093(97)80011-1 ↗
17. S.L. Semiatin, N.C. Levkulich, A.E. Saurber, D.W. Mahaffey, E.J. Payton, and O.N. Senkov: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 5567-5578.10.1007/s11661-017-4322-4 ↗
18. H. Boekels and H.J. Rack: in Ti-2015: Proceedings of the 13th World Conference on Titanium, V. Venkatesh, et al., eds., TMS, Warrendale, PA, 2016, pp. 285–90.10.1002/9781119296126.ch43 ↗
19. F. Bruneseaux, E. Aeby-Gautier, G. Geandier, J. Teixeira, B. Appolaire, P. Weisbecker, and A. Mauro: Mater. Sci. Eng. A, 2008, A476, 60-68.10.1016/j.msea.2007.04.072 ↗
20. M. Dehmas, R. Katerni, B. Appolaire, E. Aeby-Gautier, B. Denand, and S. Audion: in Ti-2011, Proceedings of the 12th World Conference on Titanium, L. Zhou, H. Chang, Y. Lu, and D. Xu, eds., Nonferrous Metals Society of China, Beijing, 2011, pp. 719–23.
21. A Idhil Ismail, M. Dehmas, E. Aeby-Gautier, and B. Appolaire: in Ti-2015: Proceedings of the 13th World Conference on Titanium, eds. V. Venkatesh, et al., MS, Warrendale, OH, 2016, pp. 593–98.
22. M.J. Whelan: Metal Sci. Journal, 1969, vol. 3, pp. 95–97.10.1179/msc.1969.3.1.95 ↗
23. H.B. Aaron and G.R. Kotler: Metall. Trans., 1971, vol. 2, pp. 393-408.10.1007/BF02663326 ↗
24. H.B. Aaron and G.R. Kotler: Metal Sci. Journal, 1970, vol. 4, 222-225.10.1179/msc.1970.4.1.222 ↗
25. G. Wang, D.S. Xu, N. Ma, N. Zhou, E.J. Payton, R. Yang, M.J. Mills, and Y. Wang: Acta Mater., 2009, vol. 57, pp. 316-325.10.1016/j.actamat.2008.09.010 ↗
26. B. Appolaire, J. Da Costa-Teixeira, E. Aeby-Gautier, and F. Bruneseaux: in Ti 2007, Science and Technology, eds. M. Ninomi, S. Akiyama, M. Ikeda, M. Hagiwara, and K. Maruyama, Japan Institute of Metals, Kyoto, 2007, pp. 961-964.
27. R. Castro and L. Seraphin: Mém. Sci. Rev. Metall., 1966, vol. 63, pp. 1025-1058.10.1051/metal/196663121025 ↗
28. S.L. Semiatin, F. Montheillet, G. Shen, and J.J. Jonas: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2719-2727.10.1007/s11661-002-0394-9 ↗
29. S.L. Semiatin, D.W. Mahaffey, N.C. Levkulich, and O.N. Senkov: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 5357-5367.10.1007/s11661-017-4296-2 ↗
30. S.L. Semiatin, N.C. Levkulich, A.R.C. Gerlt, E.J. Payton, J.S. Tiley, F. Zhang, R.A. MacKay, R.V. Miner, and T.P. Gabb: Metall. Mater. Trans. A, 2019. https://doi.org/10.1007/s11661-018-05104-w.10.1007/s11661-018-05104-w ↗
31. A.R.C. Gerlt, R.S. Picard, A.E. Sauber, A.K. Criner, S.L. Semiatin, and E.J. Payton: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 4424-4428.10.1007/s11661-018-4808-8 ↗
32. O. Grong and H.R. Shercliff: Progress in Materials Science, 2002, vol. 47, pp. 163-282.10.1016/S0079-6425(00)00004-9 ↗
33. S.L. Semiatin, B.C. Kirby, and G.A. Salishchev: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2809-281910.1007/s11661-004-0228-z ↗
34. J.D. Miller and S.L. Semiatin: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 259-262.10.1007/s11661-005-0158-4 ↗
35. H.B. Aaron, D. Fainstein, and G.R. Kotler: J Appl. Physics, 1970, vol. 41, pp. 4404-4410.10.1063/1.1658474 ↗
36. H.S. Carslaw and J.C. Jaeger: Conduction of Heat in Solids, Oxford University Press, London, 1959.
37. S.L. Semiatin, S.L. Knisley, P.N. Fagin, F. Zhang, and D.R. Barker: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2377-2386.10.1007/s11661-003-0300-0 ↗
38. P.E. Markovsky: Scripta Metall. et Mater., 1991, vol. 25, pp. 2705-2710.10.1016/0956-716X(91)90143-O ↗
39. O.M. Ivasishin, P.E. Markovsky, and E.I. Sharipov: J. Mat. Prod. Techn., 1993, 8, 204-212.
40. N.C. Levkulich: MS Thesis, Wright State University, Dayton, 2017. https://etd.ohiolink.edu/pg_10?115357049926602::NO:10:P10_ETD_SUBID:159800