Microstructure Development of 308L Stainless Steel During Additive Manufacturing
Source abstract
Abstract
In situ high-energy X-ray diffraction measurements were completed during deposition of 308L stainless steel wire onto a 304L stainless steel substrate. Attempts were made to extract microstructural features such as phase fraction and internal stress, as well as temperature evolution immediately following the deposition. The limited data that could be collected during deposition and rapid solidification are critically examined. High-energy X-rays coupled with relatively slow detectors were utilized to enable determination of orientation-dependent lattice parameters accurately enough to comment on phase strain evolution between austenite and ferrite. Information about the hydrostatic and deviatoric stress states of the constituent phases was determined on time scales that are relevant to their development. However, the time resolution of the technique was insufficient to monitor phase evolution during the solid–solid phase transformation and, more so, during solidification. Moreover, the accurate and absolute determination of inherently statistical parameters, such as phase fraction, depends critically on the ability to sample a statistically significant numbers of grains in the microstructure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. D.D. Gu, W. Meiners, K. Wissenbach, R. Poprawe, Int. Mater. Rev., 2012, 3, vol. 57, pp. 133-164.10.1179/1743280411Y.0000000014 ↗
2. [2] S.A. Davis, J.M. Vitek, T.L. Hebble, Welding Journal, 1987, vol. 66, pp. S289-S300.
3. Y.M. Wang, T. Voisin, J.T. McKeown, J. Ye, N.P. Calta, Z. Li, Z. Zeng, Y. Zhang, W. Chen, T.T. Roehling, R.T. Ott, M.K. Santala, Philip J. Depond, M.J. Matthews, A.V. Hamza, T. Zhu, Nature Materials, 2017, vol. 17, pp. 63–71.10.1038/nmat5021 ↗
4. V. Richter-Trummer, S.M.O. Tavares, P. Moreira, M.A.V. de Figueiredo, P. de Castro, Ciência & Tecnologia dos Materiais, 2008, 1-2, vol. 20, pp. 114-119.
5. L.E. Murr, E. Martinez, J. Hernandez, S. Collins, K.N. Amato, S.M. Gaytan, P.W. Shindo, Journal of Materials Research and Technology, 2012, 3, vol. 1, pp. 167-177.10.1016/S2238-7854(12)70029-7 ↗
6. [6] R. Casati, M. Coduri, N. Lecis, C. Andrianopoli, M. Vedani, Materials Characterization, 2018, vol. 137, pp. 50-57.10.1016/j.matchar.2018.01.015 ↗
7. B.K. Foster, A.M. Beese, J.S. Keist, E.T. McHale, T.A. Palmer, Metall. Mater. Trans. A, 2017, 9, vol. 48A, pp. 4411-4422.10.1007/s11661-017-4164-0 ↗
8. D.W. Brown, J.D. Bernardin, J.S. Carpenter, B. Clausen, D. Spernjak, J.M. Thompson, Mater. Sci. Eng., A, 2016, vol. 678, pp. 291-298.10.1016/j.msea.2016.09.086 ↗
9. P. Mercelis, J.P. Kruth, Rapid Prototyping Journal, 2006, 5, vol. 12, pp. 254-265.10.1108/13552540610707013 ↗
10. [10] A. Riemer, S. Leuders, M. Thoene, H.A. Richard, T. Troester, T. Niendorf, Eng. Fract. Mech., 2014, vol. 120, pp. 15-25.10.1016/j.engfracmech.2014.03.008 ↗
11. I. Yadroitsev, I. Yadroitsava, Virtual and Physical Prototyping, 2015, 2, vol. 10, pp. 67-76.10.1080/17452759.2015.1026045 ↗
12. [12] B.A. Szost, S. Terzi, F. Martina, D. Boisselier, A. Prytuliak, T. Pining, M. Hofmann, D.J. Jarvis, Mater. Des., 2016, vol. 89, pp. 559-567.10.1016/j.matdes.2015.09.115 ↗
13. A.S. Wu, D.W. Brown, M. Kumar, G.F. Gallegos, W.E. King, Metall. Mater. Trans. A, 2014, 13, vol. 45A, pp. 6260-6270.10.1007/s11661-014-2549-x ↗
14. T. Watkins, H. Bilheux, K. An, A. Payzant, R. Dehoff, C. Duty, W. Peter, C. Blue, C. Brice, Adv. Mater. Processes, 2013, 3, vol. 171, pp. 23-27.
15. T. Gnaeupel-Herold, J. Slotwinski, and S. Moylan: in: 40th Annual Review of Progress in Quantitative Nondestructive Evaluation: Incorporating the 10th International Conference on Barkhausen Noise and Micromagnetic Testing, D.E. Chimenti, L.J. Bond, D.O. Thompson, eds., 2014, vols. 33a and 33b, pp. 1205–12.
16. [16] R. Xie, Y. Zhao, G. Chen, X. Lin, S. Zhang, S. Fan, Q. Shi, Mater. Des., 2018, vol. 150, pp. 49-54.10.1016/j.matdes.2018.04.039 ↗
17. [17] J.C. Heigel, P. Michaleris, T.A. Palmer, J. Mater. Process. Technol., 2015, vol. 220, pp. 135-145.10.1016/j.jmatprotec.2014.12.029 ↗
18. J.W. Elmer, J. Wong, T. Ressler, Scr. Mater., 2000, 8, vol. 43, pp. 751-757.10.1016/S1359-6462(00)00481-4 ↗
19. T. Ressler, J. Wong, J.W. Elmer, Journal of Physical Chemistry B, 1998, 52, vol. 102, pp. 10724-10735.10.1021/jp983045j ↗
20. C. Zhao, K. Fezzaa, R.W. Cunningham, H. Wen, F. De Carlo, L. Chen, A.D. Rollett, T. Sun, Scientific Reports, 2017, vol. 7, pp.10.1038/s41598-017-03761-2 ↗
21. [21] C. Kenel, D. Grolimund, J.L. Fife, V.A. Samson, S. Van Petegem, H. Van Swygenhoven, C. Leinenbach, Scr. Mater., 2016, vol. 114, pp. 117-120.10.1016/j.scriptamat.2015.12.009 ↗
22. S. Selvi, A. Vishvaksenan, E. Rajasekar, Defence Technology, 2018, 1, vol. 14, pp. 28-44.10.1016/j.dt.2017.08.002 ↗
23. D.R. Haeffner, J.D. Almer, U. Lienert, Mater. Sci. Eng., A, 2005, 1-2, vol. 399, pp. 120-127.10.1016/j.msea.2005.02.023 ↗
24. Y. Ivanyushenkov, K. Harkay, M. Borland, R. Dejus, J. Dooling, C. Doose, L. Emery, J. Fuerst, J. Gagliano, Q. Hasse, M. Kasa, P. Kenesei, V. Sajaev, K. Schroeder, N. Sereno, S. Shastri, Y. Shiroyanagi, D. Skiadopoulos, M. Smith, X. Sun, E. Trakhtenberg, A. Xiao, A. Zholents, and E. Gluskin: Phys. Rev. Accel. Beams, 2017.
25. [25] S.D. Shastri, K. Fezzaa, A. Mashayekhi, W.K. Lee, P.B. Fernandez, P.L. Lee, J. Syncrotron Rad., 2002, vol. 9, pp. 317-322.10.1107/S0909049502009986 ↗
26. J.H. Lee, C.C. Aydiner, J. Almer, J. Bernier, K.W. Chapman, P.J. Chupas, D. Haeffner, K. Kump, P.L. Lee, U. Lienert, A. Miceli, G. Vera, J. Syncrotron Rad., 2008, 5, vol. 15, pp. 477-488.10.1107/S090904950801755X ↗
27. [27] I.C. Noyan, J.B. Cohen, Residual Stress-Measurement by Diffraction and Interpretation, Springer-Verlag, New York., 1987.
28. A.C. Larson and R.B. Von Dreele: Los Alamos National Lab Report, Los Alamos, NM, 1986.
29. [29] B.H. Toby, R.B. Von Dreele, J. App. Crys., 2013, vol. 46, pp. 544-549.10.1107/S0021889813003531 ↗
30. B. Clausen: Los Alamos National Lab Report, Los Alamos, NM, 2004.
31. [31] Y.S. Touloukian, R.K. Kirby, R.E. Taylor, P.D. Desai, Thermal Expansion: Metallic Elements and Alloys, Plenum Publishing Company, New York, 1975.10.1007/978-1-4757-1622-1 ↗
32. [32] E.A. Owen, E.L. Yates, A.H. Sully, Proc. Phys. Soc, 1937, vol. 49, pp. 315–322.10.1088/0959-5309/49/3/313 ↗
33. I.S. Smirnov, I.S. Monakhov, E.G. Novoselova, A.L. Udovskii, V.P. Kolotushkin, Metally, 2013, 1, vol. 2014, pp. 18-24.
34. P. Rangaswamy, C.P. Scherer, M.A.M. Bourke, Mater. Sci. Eng., A, 2001, #1-2, vol. 298, pp. 158-165.10.1016/S0921-5093(00)01292-2 ↗
35. N. Singh, P.K. Sharma, Phys. Rev. B, 1971, 4, vol. 3, pp. 1141-&.10.1103/PhysRevB.3.1141 ↗
36. [36] P.W. Hochanadel, T.J. Lienert, J.N. Martinez, R.J. Martinez, M.Q. Johnson, Weld Solidification Cracking in 304 to 304L Stainless Steel, in: T. Böllinghaus, J. Lippold, C.E. Cross (Eds.) Hot Cracking Phenomena in Welds III, Springer Berlin Heidelberg, Berlin, Heidelberg, 2011, pp. 145-160.10.1007/978-3-642-16864-2_9 ↗
37. WebElements: https://www.webelements.com/iron/physics.html, 6-13-18
38. A.J. Beaudoin, P.A. Shade, J.C. Schuren, T.J. Turner, C. Woodward, J.V. Bernier, S.F. Li, D.M. Dimiduk, P. Kenesei, J.S. Park, Phys. Rev. B, 2017, 17, vol. 96,10.1103/PhysRevB.96.174116 ↗
39. [39] K. Chatterjee, A. Venkataraman, T. Garbaciak, J. Rotella, M.D. Sangid, A.J. Beaudoin, P. Kenesei, J.S. Park, A.L. Pilchak, Int. J. Solids Struct., 2016, vol. 94-95, pp. 35-49.10.1016/j.ijsolstr.2016.05.010 ↗
40. [40] W. Tang, K.L. Halm, D.R. Trinkle, M.K.A. Koker, U. Lienert, P. Kenesei, A.J. Beaudoin, Acta Mater., 2015, vol. 101, pp. 71-79.10.1016/j.actamat.2015.08.072 ↗