Microstructure Evolution and Selective Corrosion Resistance in Underwater Multi-pass 2101 Duplex Stainless Steel Welding Joints
Source abstract
Abstract
A recently developed promising material, 2101 lean duplex stainless steel, represents an alternative to 304 austenite stainless steel. In this work, multi-pass 2101 weld joints were fabricated using the flux-cored arc welding method in a hyperbaric chamber. The pressure varied from 0 to 0.75 MPa. The evolution of the welding process and microstructure was investigated. γ2 formation in the reheated zones of the WM and HAZ was not uniform. The closer the reheated zone is to the subsequent heat source, the greater the γ2 formation in the reheated zone. Sufficient primary austenite transformation inhibited Cr2N precipitation and the subsequent intragranular γ2 formation in the reheated weld passes of the 0.45 MPa weld metal. The localized corrosion resistance of each zone of the 0.45 MPa DSS joint was measured using non-destructive double-loop electrochemical potentiokinetic reactivation tests. The localized corrosion was induced by γ2 and Cr2N. The root region of the 0.45 MPa weld metal underwent two subsequent welding thermal cycles, which induced increased γ2 formation and lower resistance to corrosion because of the decreased pitting resistance value of γ2. The correlation between microstructure evolution and the distribution of selective corrosion was determined.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. C.F. Salvador and R.A. Antunes: Corros. Eng. Sci. Techn., 2016, vol. 51, pp. 1-8.10.1080/1478422X.2016.1166706 ↗
2. S.H. Bae and H.W. Lee: Met. Mater. Int., 2013, vol. 19, pp. 563-569.10.1007/s12540-013-3026-6 ↗
3. E.M. Westin, M.M. Johansson and R.F.A. Pettersson: Weld. World, 2013, vol. 57, pp. 467-476.10.1007/s40194-013-0046-2 ↗
4. M. Moallemi, A. Zarei-Hanzaki, M. Eskandari, A. Burrows and H. Alimadadi: Metall. Mater. Trans. A, 2017, vol. 48, pp. 3675-3691.10.1007/s11661-017-4122-x ↗
5. J. Łabanowski, D. Fydrych and G. Rogalski: Advan. Mater. Sci., 2008, vol. 8, pp. 11-22.
6. E.M. Westin, C.O.A. Olsson and S. Hertzman: Corros. Sci., 2008, vol. 50, pp. 2620-2634.10.1016/j.corsci.2008.06.024 ↗
7. J. Abanowski, K. Prokop-Strzelczyńska, G. Rogalski and D. Fydrych: Advan. Mater. Sci., 2016, vol. 16, pp. 68-77.10.1515/adms-2016-0010 ↗
8. Y.H. Shi, Y. Hu, Y.Y. Yi, S.Q. Lin and Z.H. Li: Metall. Micro. Analy., 2017, vol. 6, pp. 383-389.10.1007/s13632-017-0376-3 ↗
9. Z.Q. Zhang, H.Y. Jing, L.Y. Xu, Y.D. Han and L. Zhao: Corros. Sci., 2017, vol. 120, pp. 194-210.10.1016/j.corsci.2016.12.007 ↗
10. D.H. Kang and H.W. Lee: Corros. Sci., 2013, vol. 74, pp. 396-407.10.1016/j.corsci.2013.04.033 ↗
11. A. Pramanik, G. Littlefair and A.K. Basak: Mater. Manuf. Process., 2015, vol. 30, pp. 1053-1068.10.1080/10426914.2015.1019126 ↗
12. A.J. Ramirez, J.C. Lippold and S.D. Brandi: Metall. Mater. Trans. A, 2003, vol. 34, pp. 1575-1597.10.1007/s11661-003-0304-9 ↗
13. T. Chehuan, V. Dreilich, K.S. de Assis, F.V.V. de Sousa and O.R. Mattos: Corros. Sci., 2014, vol. 86, pp. 268-274.10.1016/j.corsci.2014.06.004 ↗
14. Z.Q. Zhang, H.Y. Jing, L.Y. Xu, Y.D. Han, L. Zhao and C. Zhou: Appl. Surf. Sci., 2017, vol. 404, pp. 110-128.10.1016/j.apsusc.2017.01.252 ↗
15. K.H. Lo, C.T. Kwok and W.K. Chan: Corros. Sci., 2011, vol. 53, pp. 3697-3703.10.1016/j.corsci.2011.07.013 ↗
16. A.S. Azar, N. Woodward, H. Fostervoll and O.M. Akselsen: J. Mater. Process. Tech., 2012, vol. 212, pp. 211-219.10.1016/j.jmatprotec.2011.09.006 ↗
17. J. Farrell: Hyperbaric Welding of Duplex Stainless Steel Pinpelines Offshore, Cranfield University, 1996.
18. O.M. Akselsen, H. Fostervoll and C.H. Ahlen: Weld. J., 2009, vol. 88, pp. 21S-28S.
19. Z.Q. Zhang, H.Y. Jing, Y.D. Han, and L. Zhao: Materials & Design, 2016, vol. 109, pp. 670-685.10.1016/j.matdes.2016.07.110 ↗
20. K. Li, H.M. Gao and H.C. Li: Advanced Materials Research, 2014, vol. 988, pp. 245-248.10.4028/www.scientific.net/AMR.988.245 ↗
21. C.J. Múnez, M.V. Utrilla, A. Ureña and E. Otero: Welding International, 2010, vol. 24, pp. 105-110.10.1080/09507110902843362 ↗
22. J. Gong, Y.M. Jiang, B. Deng, J.L. Xu, J.P. Hu and J. Li: Electrochim. Acta, 2010, vol. 55, pp. 5077-5083.10.1016/j.electacta.2010.03.086 ↗
23. F. Zanotto, V. Grassi, M. Merlin, A. Balbo and F. Zucchi: Corros. Sci., 2015, vol. 94, pp. 38-47.10.1016/j.corsci.2015.01.035 ↗
24. J. Verma, R.V. Taiwade, R.K. Khatirkar, S.G. Sapate and A.D. Gaikwad: T. Indian I. Metals, 2017, vol. 70, pp. 225-237.10.1007/s12666-016-0878-8 ↗
25. ISO 12732: 2006: Corrosion of Metals and Alloys—Electrochemical Potentiokinetic Reactivation Measurement Using the Double Loop Method (Based on Cihal’s Method), 2006.
26. ASTM E1245: Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis, 2008.
27. D.H. Kang and H.W. Lee: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 4678-4687.10.1007/s11661-012-1310-6 ↗
28. A. Eghlimi, M. Shamanian and K. Raeissi: Surf. Coat. Tech., 2014, vol. 244, pp. 45-51.10.1016/j.surfcoat.2014.01.047 ↗
29. V. Muthupandi, P.B. Srinivasan, S.K. Seshadri and S. Sundaresan: Mat. Sci. Eng. A.-Struct., 2003, vol. 358, pp. 9-16.10.1016/S0921-5093(03)00077-7 ↗
30. H. Wu, S. Grabarnik, A. Emadi, G. de Graaf and R.F. Wolffenbuttel: J. Micromech. Microeng., 2009, vol. 19, pp. 74022.10.1088/0960-1317/19/7/074022 ↗
31. V. Muthupandi, P.B. Srinivasan, S.K. Seshadri and S. Sundaresan: Sci. Technol. Weld. Joi., 2004, vol. 9, pp. 47-52.10.1179/136217104225017143 ↗
32. K. Migiakis and G.D. Papadimitriou: J. Mater. Sci., 2009, vol. 44, pp. 6372-6383.10.1007/s10853-009-3878-9 ↗
33. A.J. Ramirez, S.D. Brandi and J.C. Lippold: Sci. Technol. Weld. Joi., 2004, vol. 9, pp. 301-313.10.1179/136217104225021715 ↗
34. C. Garzon and A. Ramirez: Acta Mater., 2006, vol. 54, pp. 3321-3331.10.1016/j.actamat.2006.03.018 ↗
35. Y.T. Shin, H.S. Shin and H.W. Lee: Met. Mater. Int., 2012, vol. 18, pp. 1037-1040.10.1007/s12540-012-6017-0 ↗