journal article·2017-11Open access

Microstructure and Texture Evolutions of Biomedical Ti-13Nb-13Zr Alloy Processed by Hydrostatic Extrusion

K. Ozaltin, A. Panigrahi, W. Chrominski, A. G. Bulutsuz, M. Kulczyk, M. J. Zehetbauer, M. Lewandowska

Abstract

Abstract A biomedical β-type Ti-13Nb-13Zr (TNZ) (wt pct) ternary alloy was subjected to severe plastic deformation by means of hydrostatic extrusion (HE) at room temperature without intermediate annealing. Its effect on microstructure, mechanical properties, phase transformations, and texture was investigated by light and electron microscopy, mechanical tests (Vickers microhardness and tensile tests), and XRD analysis. Microstructural investigations by light microscope and transmission electron microscope showed that, after HE, significant grain refinement took place, also reaching high dislocation densities. Increases in strength up to 50 pct occurred, although the elongation to fracture left after HE was almost 9 pct. Furthermore, Young’s modulus of HE-processed samples showed slightly lower values than the initial state due to texture. Such mechanical properties combined with lower Young’s modulus are favorable for medical applications. Phase transformation analyses demonstrated that both initial and extruded samples consist of α′ and β phases but that the phase fraction of α′ was slightly higher after two stages of HE.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Orthopaedic implants and arthroplasty · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. M.A. Gepreel and M. Niinomi: J. Mech. Behav. Biomed. Mater., 2013, vol. 20, pp. 407–15.10.1016/j.jmbbm.2012.11.014 ↗
2. D. Kuroda, M. Niinomi, M. Morigana, Y. Kato, and T. Yashiro: Mater. Sci. Eng. A, 1998, vol. 243, pp. 244–49.10.1016/S0921-5093(97)00808-3 ↗
3. P. Majumdar, S.B. Singh, and M. Chakraborty: J. Mech. Behav. Biomed. Mater., 2011, vol. 4, pp. 1132–44.10.1016/j.jmbbm.2011.03.023 ↗
4. M. Geetha, A.K. Singh, K. Muraleedharan, A.K. Gogia, and R. Asokamani: J. Alloys Compd., 2001, vol. 329, pp. 264–71.10.1016/S0925-8388(01)01604-8 ↗
5. Y.H. Hon, J.Y. Wang, and Y.N. Pan: Mater. Trans., 2003, vol. 44, pp. 2384–90.10.2320/matertrans.44.2384 ↗
6. S. Bauer, P. Schmuki, K.B. Mark, and J. Park: Progr. Mater. Sci., 2013, vol. 58, pp. 261–26.
7. M. Calin, A. Gebert, A.C. Ghinea, P.F. Gostin, S. Abdi, C. Mickel, and J. Eckert: Mater. Sci. Eng. C, 2013, vol. 33, pp. 875–83.10.1016/j.msec.2012.11.015 ↗
8. I.C. Alagic, Z. Cvijovic, S. Mitrovic, V. Panic, and M. Rakin: Corros. Sci., 2011, vol. 53, pp. 796–808.10.1016/j.corsci.2010.11.014 ↗
9. M. Niinomi: Mater. Sci. Eng. A, 1998, vol. 243, pp. 231–36.10.1016/S0921-5093(97)00806-X ↗
10. C. Lin, C. Ju, and J.C. Lin: Biomaterials, 2005, vol. 26, pp. 2899–2907.10.1016/j.biomaterials.2004.09.007 ↗
11. S. Hanada, N. Masahashi, and T.K. Jung: Mater. Sci. Eng. A, 2013, vol. 588, pp. 403–10.10.1016/j.msea.2013.09.053 ↗
12. P. Majumdar: Micron, 2012, vol. 43, pp. 876–86.10.1016/j.micron.2012.03.001 ↗
13. V.A.R. Henriques, E.T. Galvani, S.L.G. Petroni, M.S.M. Paula, and T.G. Lemos: J. Mater. Sci., vol. 45, pp. 5844–50.10.1007/s10853-010-4660-8 ↗
14. T.C. Niemeyer, C.R. Grandini, L.M.C. Pinto, A.C.D. Angelo, and S.G. Schneider: J. Alloys Compd., 2009, vol. 476, pp. 172–75.10.1016/j.jallcom.2008.09.026 ↗
15. C.A.R.P. Baptista, S.G. Schneider, E.B. Taddei, and H.M. Silva: Int. J. Fatigue, 2004, vol. 26, pp. 967–73.10.1016/j.ijfatigue.2004.01.011 ↗
16. M. Geetha, U.K. Mudali, A.K. Gogia, R. Asokamani, and B. Raj: Corros. Sci., 2004, vol. 46, pp. 877–92.10.1016/S0010-938X(03)00186-0 ↗
17. I.C. Alagic, Z. Cvijovic, S. Mitrovic, M. Rakin, D. Veljovic, and M. Babic: Tribol. Lett., 2010, vol. 40, pp. 59–70.10.1007/s11249-010-9639-8 ↗
18. M. Geetha, A.K. Singh, A.K. Gogia, and R. Asokamani: J. Alloys Compd., 2004, vol. 384, pp. 131–44.10.1016/j.jallcom.2004.04.113 ↗
19. K.S. Suresh, N.P. Gurao, D.S. Singh, S. Suwas, K. Chattopadhyay, S.V. Zherebtsov, and G.A. Salishchev: Mater. Charact., 2013, vol. 82, pp. 73–85.10.1016/j.matchar.2013.05.003 ↗
20. K. Hajizadeh, B. Eghbali, K. Topolski, and K.J. Kurzydlowski: Mater. Chem. Phys., 2014, vol. 143, pp. 1032–38.10.1016/j.matchemphys.2013.11.001 ↗
21. K.S. Suresh, M. Geetha, C. Richard, J. Landoulsi, H. Ramaswamy, S. Suwas, and R. Asokamani: Mater. Sci. Eng. C, 2012, vol. 32, pp. 763–71.10.1016/j.msec.2012.01.022 ↗
22. M.J. Zehetbauer and Y.T. Zhu: Bulk Nanostructured Materials, 1st ed., Wiley-VCH Weinheim, Weinheim, Germany, 2009, pp. 109–35.10.1002/9783527626892 ↗
23. R.Z. Valiev, I.P. Semenova, V.V. Latysh, A.V. Shcherbakov, and E.B. Yakushina: Nanotechnol. Russia, 2008, vol. 3, pp. 593–601.10.1134/S1995078008090097 ↗
24. S. Zherebtsov, A. Mazur, G. Salishchev, and W. Lojkowski: Mater. Sci. Eng. A, 2008, vol. 485, pp. 39–45.10.1016/j.msea.2007.08.081 ↗
25. Y. Estrin and A. Vinogradov: Int. J. Fatigue, 2010, vol. 32, pp. 898–907.10.1016/j.ijfatigue.2009.06.022 ↗
26. M.J. Zehetbauer and Y.T. Zhu: Bulk Nanostructured Materials, 1st ed., Wiley-VCH Weinheim, Weinheim, Germany, 2009, pp. 217–32.10.1002/9783527626892 ↗
27. R.Z. Valiev and T.G. Langdon: Progr. Mater. Sci., vol. 51, pp. 881–981.10.1016/j.pmatsci.2006.02.003 ↗
28. J.H. Hung and C. Hung: J. Mater. Process Technol., 2000, vol. 104, pp. 226–35.10.1016/S0924-0136(00)00593-8 ↗
29. W. Pachla, M. Kulczyk, S. Przybysz, J. Skiba, K. Wojciechowski, M. Przybysz, K. Topolski, A. Sobolewski, and M. Charkiewicz: J. Mater. Proc. Technol., 2015, vol. 221, pp. 255–68.10.1016/j.jmatprotec.2015.02.027 ↗
30. M. Lewandowska and K.J. Kurzydlowski: J. Mater. Sci., 2008, vol. 43, pp. 7299–7306.10.1007/s10853-008-2810-z ↗
31. W. Pachla, M. Kulczyk, M. Sus-Ryszkowska, A. Mazur, and K.J. Kurzydlowski: J. Mater. Process. Technol., 2008, vol. 205, pp. 173–82.10.1016/j.jmatprotec.2007.11.103 ↗
32. K. Pawlik and P. Ozga: Text. Phys. Prop. Rocks, 1999, vol. Sb4, pp. 146–47.
33. K. Hajizadeh and B. Eghbali: Met. Mater. Int., 2014, vol. 20, pp. 343–50.10.1007/s12540-014-2014-9 ↗
34. J.H. Kim, S.L. Semiatin, Y.H. Lee, and C.S. Lee: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 1805–14.10.1007/s11661-010-0567-x ↗
35. H. Yilmazer, M. Niinomi, K. Cho, M. Nakai, J. Hieda, S. Sato, and Y. Todaka: Acta Mater., 2014, vol. 80, pp. 172–82.10.1016/j.actamat.2014.07.041 ↗
36. K. Ozaltin, W. Chrominski, M. Kulczyk, A. Panigrahi, J. Horky, M.J. Zehetbauer, and M. Lewandowska: J. Mater. Sci., 2014, vol. 49, pp. 6930–36.10.1007/s10853-014-8397-7 ↗
37. K. Topolski, H. Garbacz, and K.J. Kurzydlowski: Mater. Sci. Forum, 2008, vols. 584–586, pp. 777–82.10.4028/www.scientific.net/MSF.584-586.777 ↗
38. E.C. Moreno-Valle, W. Pachla, M. Kulczyk, B. Savoini, M.A. Monge, C. Ballesteros, and I. Sabirov: Mater. Sci. Eng. A, 2013, vol. 588, pp. 7–13.10.1016/j.msea.2013.08.044 ↗
39. H. Yilmazer, M. Niinomi, M. Nakai, K. Cho, J. Hieda, Y. Todaka, and T. Miyazaki: Mater. Sci. Eng. C, vol. 33, pp. 2499–2507.10.1016/j.msec.2013.01.056 ↗
40. T. Ungar: Scripta Mater., 2004, vol. 51, pp. 777–81.10.1016/j.scriptamat.2004.05.007 ↗
41. D. Tromans: IJRRAS, 2011, vol. 6, pp. 462–83.
42. P.A. Gur and S.L. Semiatin: Mater. Sci. Eng. A, 1998, vol. 257, pp. 118–27.10.1016/S0921-5093(98)00829-6 ↗