Microstructures, Mechanical Properties, and Wear Resistances of Thixoextruded SiCp/WE43 Magnesium Matrix Composites
Source abstract
Abstract
Near-net shaping of Mg-RE alloy matrix composites has received increasing attention. In this work, stir casting followed by extrusion was adopted to fabricate Mg-RE alloy (WE43) matrix composites reinforced by micron-sized SiC particles. The microstructural evolutions of SiCp/WE43 composites partially remelted from as-cast and extruded states were studied. Furthermore, the thixoformability of SiCp/WE43 composites in different states was evaluated by thixoextruding a type of double-cup component. The microstructures of as-cast SiCp/WE43 composites were optimized under the comprehensive effects of SiC particles and RE elements. The SiCp/WE43 composite was fully recrystallized during hot extrusion, and the α-Mg matrix consisted of fine equiaxed grains. Although the as-cast SiCp/WE43 composite consisted of satisfactory structures and can be successfully thixoextruded into the final component with good surface quality and no evidence of internal defects, the microstructures, Vickers hardness, tensile mechanical properties, and wear resistance were still inferior to those of the component thixoextruded from extruded composite. Moreover, the thixoextrusion process was analyzed schematically, and an ideal thixoforming process that should contain two stages was proposed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. 1.G. Hirt and R. Kopp: Thixoforming: Semi-solid Metal Processing, 1st ed., Wiley-VCH, Weinheim, 2009, pp. 411-42.10.1002/9783527623969 ↗
2. 2.H.V. Atkinson: Prog. Mater. Sci., 2005, vol. 50, pp. 341-412.10.1016/j.pmatsci.2004.04.003 ↗
3. 3.Y. Meng, S. Sugiyama and J. Yanagimoto: J. Mater. Process. Technol., 2014, vol. 214, pp. 87-96.10.1016/j.jmatprotec.2013.08.001 ↗
4. 4.R.L. Nadal, A.S. Roca, H.D.C. Fals and E.J. Zoqui: J. Mater. Process. Technol., 2015, vol. 226, pp. 146-56.10.1016/j.jmatprotec.2015.07.015 ↗
5. 5.M.S. Salleh, M.Z. Omar, K.S. Alhawari, M.N. Mohammed, M. A. Madali and E. Mohamad: T. Nonferr. Metal Soc., 2016, vol. 26, pp. 2029-42.10.1016/S1003-6326(16)64321-2 ↗
6. 6.Y. Meng, S. Sugiyama, M. Soltanpour and J. Yanagimoto: J. Mater. Process. Technol., 2013, vol. 213, pp. 426-33.10.1016/j.jmatprotec.2012.09.021 ↗
7. 7.S.Q. Zhang, T.J. Chen, F.L. Cheng and L.L. Li: J. Alloys Comp., 2016, vol. 657, pp. 582-92.10.1016/j.jallcom.2015.10.189 ↗
8. 8.J.J. Wang, A.B. Phillion and G.M. Lu: J. Alloys Comp., 2014, vol. 609, pp. 290-95.10.1016/j.jallcom.2014.04.140 ↗
9. 9.Y. Meng, S. Sugiyama, J. Tan and J. Yanagimoto: J. Mater. Process. Technol., 2014, vol. 214, pp. 3037-47.10.1016/j.jmatprotec.2014.07.014 ↗
10. 10.J.J. Bhattacharyy, F. Wang, P.D. Wu, W.R. Whittington, H. El Kadiri and S.R. Agnew: Int. J. Plast., 2016, vol. 81, pp. 123-51.10.1016/j.ijplas.2016.01.005 ↗
11. 11.Q. Chen, G. Chen, L. Han, N. Hu, F. Han, Z. Zhao, X. Xia and Y. Wan: J. Alloys Comp., 2016, vol. 656, pp. 67-76.10.1016/j.jallcom.2015.09.135 ↗
12. 12.K.B. Nie, X.J. Wang, X.S. Hu, L. Xu, K. Wu and M.Y. Zheng: Mater. Sci. Eng. A, 2011, vol. 528, pp. 5278-82.10.1016/j.msea.2011.03.061 ↗
13. 13.H.V. Atkinson and D. Liu: Mater. Sci. Eng. A, 2008, vol. 496, 439-46.10.1016/j.msea.2008.06.013 ↗
14. 14.Y. Meng, S. Sugiyama and J. Yanagimoto: J. Mater. Process. Technol., 2015, vol. 225, pp. 203-12.10.1016/j.jmatprotec.2015.05.031 ↗
15. 15.V.A. Snyder, J. Alkemper and P.W. Voorhees: Acta Mater., 2001, vol. 49, pp. 699-709.10.1016/S1359-6454(00)00342-6 ↗
16. 16.E. Tzimas and A. Zavaliangos: Mater. Sci. Eng. A, 2000, vol. 289, pp. 228-40.10.1016/S0921-5093(00)00908-4 ↗
17. 17.A. Neag, V. Favier, R. Bigot and M. Pop: J. Mater. Process. Technol., 2012, vol. 212, pp. 1472-80.10.1016/j.jmatprotec.2012.02.003 ↗
18. 18.C.P. Chen and C.Y.A. Tsao: Acta Mater., 1997, vol. 45(5), pp. 1955-68.10.1016/S1359-6454(96)00312-6 ↗
19. 19.G. Chen, Q. Chen, J. Qin and Z. Du: J. Mater. Process. Technol., 2016, vol. 229, pp. 467-74.10.1016/j.jmatprotec.2015.10.005 ↗