journal article·2016-05Open access

Toward Improving the Type IV Cracking Resistance in Cr-Mo Steel Weld Through Thermo-Mechanical Processing

Benjamin A. Shassere, Yukinori Yamamoto, Sudarsanam Suresh Babu

Abstract

Detailed microstructure characterization of Grade 91 (Modified 9Cr-1Mo, ASTM A387) steel subjected to a thermo-mechanical treatment process was performed to rationalize the cross-weld creep properties. A series of thermo-mechanical processing in the austenite phase region, followed by isothermal aging at temperatures at 973 K to 1173 K (700 °C to 900 °C), was applied to the Grade 91 steel to promote precipitation kinetics of MX (M: Nb and V, X: C and N) in the austenite matrix. Detailed characterization of the base metals after standard tempering confirmed the presence of fine MX dispersion within the tempered martensitic microstructure in steels processed at/and above 1073 K (800 °C). Relatively low volume fraction of M23C6 precipitates was observed after processing at 1073 K (800 °C). The cross-weld creep strength after processing was increased with respect to the increase of MX dispersion, indicating that these MX precipitates maintained during weld thermal cycles in the fine-grained heat-affected zone region and thereby contribute to improved creep resistant of welds in comparison to the welds made with the standard “normalization and tempering” processes. The steels processed in this specific processing condition showed improved cross-weld creep resistance and sufficient room temperature toughness. The above data are also analyzed based on existing theories of creep deformation based on dislocation climb mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. 1. Abe, F. Science and Technology of Advanced Materials, 2008. 9(1): p. 013002.10.1088/1468-6996/9/1/013002 ↗
2. 2. Bhadeshia, H.K.D.H. Isij International, 2001. 41(6): p. 626-640.10.2355/isijinternational.41.626 ↗
3. X. Yu: Doctor of Philosophy Dissertation, The Ohio State University, Columbus, 2012.
4. 4. Auerkari, P., et al. International Journal of Pressure Vessels and Piping, 2007. 84(1-2): p. 69-74.10.1016/j.ijpvp.2006.09.011 ↗
5. 5. Hirata, H. and K. Ogawa. Welding International, 2005. 19(2): p. 118-124.10.1533/wint.2005.3378 ↗
6. 6. Hirata, H. and K. Ogawa. Welding International, 2005. 19(2): p. 109-117.10.1533/wint.2005.3377 ↗
7. 7. Laha, K., et al. Metallurgical and Materials Transactions A, 2008. 40(2): p. 386-397.
8. 8.Tsukamoto, S., et al. (2009) Trends in Welding Research, 1: 296-302.
9. Y. Yamamoto, et al.: Proceeding of the 10th Liège Conference on Materials for Advanced Power Engineering, 2014.
10. 10. Francis, J.A., W. Mazur, and H.K.D.H. Bhadeshia. Materials Science and Technology, 2006. 22(12): p. 1387-1395.10.1179/174328406X148778 ↗
11. Y. Yamamoto, X. Yu, and S.S. Babu: Proceedings of the ASME Symposium on Elevated Temperature Application of Materials for Fossil, Nuclear, and Petrochemical Industries, 2014.
12. B. Shassere, Y. Yamamoto, and S.S. Babu: Proceeding of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials, 2015.
13. C.R. Brinkman, V.K. Sikka, J.A. Horak, M.L. Santella: ORNL/TM-10504, 1987.
14. 14. Yu, X., et al. Acta Materialia, 2013. 61(6): p. 2194-2206.10.1016/j.actamat.2012.12.040 ↗
15. 15. Klueh, R.L., N. Hashimoto, and P.J. Maziasz. Scripta Materialia, 2005. 53(3): p. 275-280.10.1016/j.scriptamat.2005.04.019 ↗
16. 16. Klueh, R.L., N. Hashimoto, and P.J. Maziasz. Journal of Nuclear Materials, 2007. 367-370: p. 48-53.10.1016/j.jnucmat.2007.03.001 ↗
17. 17. Nöhrer, M., et al. Metallurgical and Materials Transactions A, 2014. 45(10): p. 4210-4219.10.1007/s11661-014-2373-3 ↗
18. 18. Tamura, M., et al. Journal of Nuclear Materials, 2003. 321(2-3): p. 288-293.10.1016/S0022-3115(03)00281-2 ↗
19. 19. Sawada, K., K. Kubo, and F. Abe. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 2001. 319: p. 784-787.10.1016/S0921-5093(01)00973-X ↗
20. 20. Hofer, P., H. Cerjak, and P. Warbichler. Materials Science and Technology, 2000. 16(10): p. 1221-1225.10.1179/026708300101506984 ↗
21. 21. Taneike, M., K. Sawada, and F. Abe. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 2004. 35A(4): p. 1255-1262.10.1007/s11661-004-0299-x ↗
22. 22. Maruyama, K., K. Sawada, and J. Koike. Isij International, 2001. 41(6): p. 641-653.10.2355/isijinternational.41.641 ↗
23. 23. Kawata, H., et al. Materials Science and Engineering: A, 2006. 438-440: p. 140-144.10.1016/j.msea.2006.02.175 ↗
24. 24. Morito, S., et al. Acta Materialia, 2003. 51(6): p. 1789-1799.10.1016/S1359-6454(02)00577-3 ↗
25. 25. Kitahara, H., et al. Acta Materialia, 2006. 54(5): p. 1279-1288.10.1016/j.actamat.2005.11.001 ↗
26. S.M. Song, et al.: in Mechanical Behavior of Materials X, Pts 1 and 2, S.W. Nam, et al., eds. Trans Tech Publications Ltd, Stafa-Zurich, 2007, pp. 1565–68.
27. 27. Li, S.Z., et al. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 2013. 559: p. 882-888.10.1016/j.msea.2012.09.040 ↗
28. 28. Abe, F., et al. Materials Science and Engineering: A, 2004. 378(1-2): p. 299-303.10.1016/j.msea.2003.11.073 ↗
29. 29. Abe, F. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 2005. 36A(2): p. 321-332.10.1007/s11661-005-0305-y ↗
30. 30. Babu, S.S., et al. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 1996. 27(3): p. 763-774.10.1007/BF02648964 ↗
31. 31. Li, D. and K. Shinozaki. Science and Technology of Welding and Joining, 2005. 10(5): p. 544-549.10.1179/174329305X29519 ↗
32. 32. Watanabe, T., et al. International Journal of Pressure Vessels and Piping, 2004. 81(3): p. 279-284.10.1016/j.ijpvp.2003.12.017 ↗
33. 33. Gupta, C., et al. Materials Science and Technology, 2015. 31(5): p. 603-626.10.1179/1743284714Y.0000000693 ↗
34. 34. Thomson, R.C. and H.K.D.H. Bhadeshia. Metallurgical Transactions a-Physical Metallurgy and Materials Science, 1992. 23(4): p. 1171-1179.10.1007/BF02665048 ↗
35. Yu, X., Zhili Feng, and Y. Yamamoto. Proceedings of 7th International Conference on Advances in Materials Technology for Fossil Power Plants, 2013.
36. 36. Smith, D.J., N.S. Walker, and S.T. Kimmins. International Journal of Pressure Vessels and Piping, 2003. 80(9): p. 617-627.10.1016/S0308-0161(03)00134-0 ↗
37. 37. Shrestha, T., et al. Materials Science and Engineering: A, 2013. 565: p. 382-391.10.1016/j.msea.2012.12.031 ↗
38. 38. Ashby, M.F. Acta Metallurgica, 1966. 14(5): p. 679-&.10.1016/0001-6160(66)90074-5 ↗