Microstructure Formation in Dissimilar Metal Welds: Electron Beam Welding of Ti/Ni
Source abstract
Abstract
We present results for electron beam welding of a binary Ti/Ni dissimilar metal couple. The difference in physical properties of the base metals and metallurgical features (thermodynamics and kinetics) of the system influence both macroscopic transport and microstructure development in the weld. Microstructures near the fusion interfaces are markedly different from those inside the weld region. At the Ti side, Ti2Ni dendrites are observed to grow toward the fusion interface, while in the Ni side, layered growth of γ-Ni, Ni3Ti, and Ni3Ti + NiTi eutectic is observed. Different morphologies of the latter eutectic constitute the predominant microstructure inside the weld metal region. These results are compared and contrasted with those from laser welding of the same binary couple, and a scheme of solidification is proposed to explain the observations. This highlights notable departures from welding of similar and other dissimilar metals such as a significant asymmetry in heat transport that governs progress of solidification from each side of the couple, and a lack of unique liquidus isotherm characterizing the liquid–solid front.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Intermetallics and Advanced Alloy Properties · Shape Memory Alloy Transformations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. G. Phanikumar, K. Chattopadhyay and P. Dutta: Metall. Mater. Trans. B, 2004, vol. 35B, pp. 339–50.10.1007/s11663-004-0034-4 ↗
2. G. Phanikumar, P. Dutta and K. Chattopadhyay: Sci. Tech. Weld. Join,, 2005, vol. 10, pp. 158–66.10.1179/174329305X36043 ↗
3. T. Nelson, J. Lippold and M. Mills: Weld. J., 1999, vol. 78, pp. 329S–37S.
4. G. Phanikumar, S. Manjini, P. Dutta, K. Chattopadhyay and J. Mazumder: Metall. Mater. Trans. A, 2005, vol. 36, pp. 2137–47.10.1007/s11661-005-0334-6 ↗
5. M. K. Lee, J. G. Lee, Y. H. Choi, D. W. Kim, C. K. Rhee, Y. B. Lee and S. J. Hong: Mater. Lett., 2010, vol. 64, pp. 1105–108.10.1016/j.matlet.2010.02.024 ↗
6. S. Sam, S. Kundu and S. Chatterjee: Mater. Des., 2012, vol. 40, pp. 237–44.10.1016/j.matdes.2012.02.058 ↗
7. B. Shanmugarajan and G. Padmanabham: Opt. Lasers Eng., 2012, vol. 50, pp. 1621–27.10.1016/j.optlaseng.2012.05.008 ↗
8. G. Satoh, Y. L. Yao and C. Qiu: Intl. J. Adv. Manuf. Technol., 2013, vol. 66, pp. 469–79.10.1007/s00170-012-4342-6 ↗
9. B. Chen, H. Xiong, B. Sun, S. Tang, B. Du and N. Li: Prog. Nat. Sci., 2014, vol. 24, pp. 313–20.10.1016/j.pnsc.2014.06.003 ↗
10. B.-Q. Chen, H.-P. Xiong, S.-Q. Guo, B.-B. Sun, B. Chen and S.-Y. Tang: Metall. Mater. Trans. A, 2014, vol. 46A, pp. 756–61.
11. A. J. Cavaleiro, A. S. Ramos, F. M. Braz Fernandes, N. Schell and M. T. Vieira: J. Mater. Eng. Perform., 2014, vol. 23, pp. 1625–29.10.1007/s11665-014-0930-y ↗
12. S. Chen, M. Zhang, J. Huang, C. Cui, H. Zhang and X. Zhao: Mater. Des., 2014, vol. 53, pp. 504–11.10.1016/j.matdes.2013.07.044 ↗
13. I. Tomashchuk, P. Sallamand, H. Andrzejewski and D. Grevey: Intermet., 2011, vol. 19, pp. 1466–73.10.1016/j.intermet.2011.05.016 ↗
14. I. Tomashchuk, P. Sallamand, N. Belyavina and M. Pilloz: Mater. Sci. Eng. A, 2013, vol. 585, pp. 114–22.10.1016/j.msea.2013.07.050 ↗
15. I. Tomashchuk, D. Grevey and P. Sallamand: Mater. Sci. Eng. A, 2015, vol. 622, pp. 37–45.10.1016/j.msea.2014.10.084 ↗
16. H.-C. Chen, A. J. Pinkerton and L. Li: Int. J. Adv. Manuf. Technol., 2011, vol. 52, pp. 977–87.10.1007/s00170-010-2791-3 ↗
17. X. M. Qiu, M. G. Li, D. Q. Sun and W. H. Liu: J. Mater. Proc. Tech., 2006, vol. 176, pp. 8-12.10.1016/j.jmatprotec.2005.06.004 ↗
18. H. Li, D. Sun, X. Cai, P. Dong and W. Wang: Mater. Des., 2012, vol. 39, pp. 285–93.10.1016/j.matdes.2012.02.031 ↗
19. H. Li, D. Sun, X. Cai, P. Dong and X. Gu: Opt. Laser Tech., 2013, vol. 45, pp. 453–60.10.1016/j.optlastec.2012.06.010 ↗
20. H. Li, D. Sun, X. Gu, P. Dong and Z. Lv: Mater. Des., 2013, vol. 50, pp. 342–50.10.1016/j.matdes.2013.03.014 ↗
21. G. R. Mirshekari, A. Saatchi, A. Kermanpur and S. K. Sadrnezhaad: Opt. Laser Tech., 2013, vol. 54, pp. 151–58.10.1016/j.optlastec.2013.05.014 ↗
22. J. Pouquet, R. Miranda, L. Quintino and S. Williams: Int. J. Adv. Manuf. Tech., 2012, vol. 61, pp. 205–12.10.1007/s00170-011-3694-7 ↗
23. H. Gugel, A. Schuermann and W. Theisen: Mater. Sci. Eng. A, 2008, vol. 481–482, pp. 668–71.10.1016/j.msea.2006.11.179 ↗
24. J. Vannod, M. Bornert, J. E. Bidaux, L. Bataillard, A. Karimi, J. M. Drezet, M. Rappaz and A. Hessler-Wyser: Acta Mater., 2011, vol. 59, pp. 6538–46.10.1016/j.actamat.2011.06.031 ↗
25. B. Panton, A. Pequegnat and Y. N. Zhou: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 3533–44.10.1007/s11661-014-2280-7 ↗
26. J. Seretsky and E. R. Ryba: Weld. J., 1976, vol. 55, pp. 208S–11S.
27. G. Metzger and R. Lison: Weld. J., 1979, vol. 55, pp. 230S–40S.
28. S. Chatterjee, T. Abinandanan and K. Chattopadhyay: J. Mater. Sci., 2006, vol. 41, pp. 643–52.10.1007/s10853-006-6480-4 ↗
29. S. Chatterjee, T. Abinandanan and K. Chattopadhyay: Mater. Sci. Eng. A, 2008, vol. 490, pp. 7-15.10.1016/j.msea.2007.12.041 ↗
30. T. B. Massalski, H. Okamoto, P. Subramanian and L. Kacprzak: Binary Alloy Phase Diagrams, ASM International, Materials Park, 1990, pp. 2874–76.
31. S. Kou: Welding Metallurgy, Wiley Interscience, Hoboken, 2003, pp. 170–98.
32. S. Chatterjee: Microstructure Development During Laser and Electron Beam Welding of Ti/Ni Dissimilar Joints, Indian Institute of Science, Bangalore, India, 2009. URL: http://etd.ncsi.iisc.ernet.in/handle/2005/601
33. T. B. Massalski and C. G. Woychik: Acta Met., 1985, vol. 33, pp. 1873–86.10.1016/0001-6160(85)90009-4 ↗
34. C. G. Woychik, D. H. Lowndes and T. B. Massalski: Acta Met., 1985, vol. 33, pp. 1861–71.10.1016/0001-6160(85)90008-2 ↗
35. R. Nagarajan and K. Chattopadhyay: Acta Met. Mater., 1994, vol. 42, pp. 947–58.10.1016/0956-7151(94)90289-5 ↗
36. S. Chatterjee, T. A. Abinandanan and K. Chattopadhyay: Met. Mater. Trans. A, 2008, vol. 39A, pp. 1638–46.10.1007/s11661-007-9340-1 ↗
37. N. Geveling and S. Maslenkov: Met. Sci. Heat Treat., 1976, vol. 18, pp. 755–60.10.1007/BF00704110 ↗
38. S. Han and R. Trivedi: Met. Mater. Trans. A, 2000, vol. 31, pp. 1819–32.10.1007/s11661-006-0246-0 ↗
39. W. Kurz and R. Trivedi: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 625–34.10.1007/BF02648951 ↗
40. J. S. Park and R. Trivedi: J. Crys. Growth, 1998, vol. 187, pp. 511–15.10.1016/S0022-0248(97)00884-1 ↗
41. H. Cline and T. Anthony: J. Appl. Phys., 1977, vol. 48, pp. 3895–900.10.1063/1.324261 ↗
42. J. Hunt and K. Jackson: Trans. Met. Soc. AIME, 1966, vol. 236, pp. 843–52.
43. M. Croker, R. Fidler and R. Smith: Proc. R. Soc. A, 1973, vol. 335, pp. 15–37.10.1098/rspa.1973.0111 ↗
44. J. Murray: The Ni-Ti (nickel-titanium) system, ASM International, Materials Park, 1987, pp. 197–211.
45. E. Brandes and G. Brook: Smithell’s Handbook, 7th Ed., Butterworth-Heinemann, Oxford, UK, 1992, pp. 14.19–14.10
46. C. Limmaneevichitr and S. Kou: Weld. J., 2000, vol. 79, pp. 231S–37S.