Processing of Ultrafine-Size Particulate Metal Matrix Composites by Advanced Shear Technology
Source abstract
Abstract
Lack of efficient mixing technology to achieve a uniform distribution of fine-size reinforcement within the matrix and the high cost of producing components have hindered the widespread adaptation of particulate metal matrix composites (PMMCs) for engineering applications. A new rheo-processing method, the melt-conditioning high-pressure die-cast (MC-HPDC) process, has been developed for manufacturing near-net-shape components of high integrity. The MC-HPDC process adapts the well-established high shear dispersive mixing action of a twin-screw mechanism to the task of overcoming the cohesive force of the agglomerates under a high shear rate and high intensity of turbulence. This is followed by direct shaping of the slurry into near-net-shape components using an existing cold-chamber die-casting process. The results indicate that the MC-HPDC samples have a uniform distribution of ultrafine-sized SiC particles throughout the entire sample in the as-cast condition. Compared to those produced by conventional high-pressure die casting (HPDC), MC-HPDC samples have a much improved tensile strength and ductility.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. P. Rohatgi: AFS Trans., 2001, pp. 1–133
2. I.A. Ibrahim, F.A. Mohamed, E.J. Lavernia: J. Mater. Sci., 1991, vol. 26, pp. 1137–5610.1007/BF00544448 ↗
3. D.J. Lloyd: Int. Mater. Rev., 1994, vol. 39 (1), pp. 1–2310.1179/imr.1994.39.1.1 ↗
4. S. Ray: J. Mater. Sci., 1993, vol. 28, pp. 5397–541310.1007/BF00367809 ↗
5. D.B. Miracle: Compos. Sci. Technol., 2005, vol. 65, pp. 2526–4010.1016/j.compscitech.2005.05.027 ↗
6. R. Asthana: Adv. Perf. Mater., 1998, vol. 5, pp. 213–5510.1023/A:1008634531980 ↗
7. N. Chawala, K.K. Chawala: J. Mater., 2006, vol. 58 (11), pp. 67–70
8. H. Rumpf: Agglomeration, Interscience Publishers, New York, NY, 1962, pp. 379–413
9. S.V. Nair, J.K. Tien, R.C. Bates: Int. Met. Rev., 1985, vol. 30 (6), pp. 275–90
10. D.J. Lloyd: Acta Metall. Mater., 1991, vol. 39 (1), pp. 59–7110.1016/0956-7151(91)90328-X ↗
11. L.M. Tham, M. Gupta, L. Cheng: Acta Mater., 2001, vol. 49, pp. 3243–5310.1016/S1359-6454(01)00221-X ↗
12. F. Rana, B.K. Dhindaw, and D.M. Stefanescu: AFS Trans., 1989, pp. 255–64
13. P.K. Rohatgi, J. Sobczak, R. Asthana, J.K. Kim: Mater. Sci. Eng. A, 1998, vol. A252, pp. 98–10810.1016/S0921-5093(98)00651-0 ↗
14. N. Aniban, R.M. Pillai, B.C. Pai: Mater. Des., 2002, vol. 23, pp. 553–5610.1016/S0261-3069(02)00024-9 ↗
15. K.R. Ravi, V.M. Sreekumar, R.M. Pillai, C. Mahato, K.R. Amaranathan, R.A. Kumar, B.C. Pai: Mater. Des., 2007, vol. 28, pp. 871–8110.1016/j.matdes.2005.10.007 ↗
16. P.K. Rohatgi, R. Asthana, S. Das: Int. Met. Rev., 1986, vol. 31 (3), pp. 115–39
17. A. Mortensen, I. Jin: Int. Mater. Rev., 1992, vol. 37 (3), pp. 101–2810.1179/imr.1992.37.1.101 ↗
18. J. Hashim, L. Looney, M.S.J. Hashmi: J. Mater. Process. Technol., 2002, vol. 123, pp. 251–5710.1016/S0924-0136(02)00098-5 ↗
19. J. Hashim, L. Looney, M.S.J. Hashmi: J. Mater. Process. Technol., 2002, vol. 123, pp. 258–6310.1016/S0924-0136(02)00099-7 ↗
20. D.M. Stefanescu, B.K. Dhindaw, S.A. Kacar, A. Moitra: Metall. Trans. A, 1988, vol. 19A, pp. 2847–85510.1007/BF02645819 ↗
21. C.B. Lin, C.L. Ma, Y.W. Chung: J. Mater. Process. Technol., 1998, vol. 48, pp. 236–4610.1016/S0924-0136(98)00226-X ↗
22. C.B. Lin, C.L. Wu, C.H. Chiang: J. Mater. Sci., 1999, vol. 34, pp. 2229–4010.1023/A:1004557103809 ↗
23. H. Sevik, S. Can Kurnaz: Mater. Des., 2006, vol. 27, pp. 676–8310.1016/j.matdes.2005.01.006 ↗
24. Z. Zhang, X.G. Chen, A. Charette: J. Mater. Sci., 2007, vol. 42, pp. 7354–6210.1007/s10853-007-1554-5 ↗
25. F. Delannay, L. Froyen, A. Deruyttere: J. Mater. Sci., 1987, vol. 22, pp. 1–1610.1007/BF01160545 ↗
26. M.K. Surappa, P.K. Rohatgi: J. Mater. Sci., 1981, vol. 16, pp. 983–9310.1007/BF00542743 ↗
27. M. Gupta, M.K. Surappa: Key Eng. Mater., 1995, vols. 104–107, pp. 259–7410.4028/www.scientific.net/KEM.104-107.259 ↗
28. W.C. Harrigan Jr.: Mater. Sci. Eng. A, 1998, vol. 244A, pp. 75–7910.1016/S0921-5093(97)00828-9 ↗
29. T.S. Srivatsan, M. Al-Hajri, C. Smith, M. Petraroli: Mater. Sci. Eng., 2003, vol. 346A, pp. 91–10010.1016/S0921-5093(02)00481-1 ↗
30. A. Onat, H. Akbulut, F. Yilmaz: J. Alloy Compd., 2007, vol. 436, pp. 375–8210.1016/j.jallcom.2006.07.057 ↗
31. S. Skolianos: Mater. Sci. Eng. A, 1996, vol. 210A, pp. 76–8210.1016/0921-5093(95)10043-1 ↗
32. M. Gupta, L. Lu, M.O. Lai, S.E. Ang: Mater. Des., 1995, vol. 16 (2), pp. 75–8110.1016/0261-3069(95)00020-Y ↗
33. C.G. Kang, S.W. Youn: J. Mater. Process. Technol., 2004, vol. 147, pp. 10–2210.1016/S0924-0136(03)00606-X ↗
34. Y. Yalcin, H. Akbulut: Mater. Des., 2006, vol. 27, pp. 872–8110.1016/j.matdes.2005.03.007 ↗
35. J. Segurado, C. Conzalez, J. Llorca: Acta Mater., 2003, vol. 51, pp. 2355–6910.1016/S1359-6454(03)00043-0 ↗
36. X. Deng, N. Chawla: J. Mater. Sci., 2006, vol. 41, pp. 5731–3410.1007/s10853-006-0100-1 ↗
37. J. Tomas: Chem. Eng. Sci., 2007, vol. 62, pp. 1997–201010.1016/j.ces.2006.12.055 ↗
38. M.L. Falk, J.S. Langer: Phys. Rev. E, 1998, vol. 57 (6), pp. 7192–20510.1103/PhysRevE.57.7192 ↗
39. C.A. Schuh, A.C. Lund: Nat. Mater., 2003, vol. 2, pp. 449–5210.1038/nmat918 ↗
40. N. Harnby, M.F. Edward, A.W. Nienow: Mixing in the Process Industries, 2nd ed., Butterworths-Heinemann Ltd., Oxford, United Kingdom, 1985, pp. 99–136
41. W. Beck, P. Forschner, R. Junghanns, D. Klatt, G. Philipp, F. Sauter, H. Schneider, T. Schneider, K.-H. Schwarzer, W. Schwechheimer, R. Vettermann, E. Zimmermann: Handbook of Mixing Technology, EKATO Ruhr-und Mischtechnik GmbH, Schopfheim, Germany, 1991, pp. RS1–RS10
42. K. Kendall: Powder Metall., 1988, vol. 31 (1), pp. 28–31
43. Z. Fan, M.J. Bevis, and S. Ji: UK Patent Application No. 9922696.3, 1999
44. S. Ji, Z. Fan, M.J. Bevis: Mater. Sci. Eng. A, 2001, vol. 299A, pp. 210–1710.1016/S0921-5093(00)01373-3 ↗
45. J.C. Lee, J.Y. Byun, S.B. Park, H.I. Lee: Acta Mater., 1998, vol. 46 (5), pp. 1771–8010.1016/S1359-6454(97)00265-6 ↗
46. Z. Fan, X. Fang, S. Ji: Mater. Sci. Eng. A, 2005, vol. 412A, pp. 298–30610.1016/j.msea.2005.09.001 ↗
47. H. Tang, L.C. Wrobel, Z. Fan: Modell. Simul. Mater. Sci. Eng., 2003, vol. 11, pp. 771–9010.1088/0965-0393/11/5/305 ↗
48. S. Yotte, D. Breysse, J. Riss, S. Ghosh: Mater. Charact., 2001, vol. 46, pp. 211–1910.1016/S1044-5803(01)00126-7 ↗
49. P. Ganguly, W.J. Poole: Mater. Sci. Eng. A, 2002, vol. 332A, pp. 301–1010.1016/S0921-5093(01)01757-9 ↗
50. I.G. Waston, M.F. Forster, P.D. Lee, R.J. Dashwood, R.W. Hamilton, A. Chirazi: Composites Part A, 2005, vol. 36, pp. 1177–8710.1016/j.compositesa.2005.02.003 ↗
51. J.E. Spowart: Mater. Sci. Eng. A, 2006, vol. 425A, pp. 225–3710.1016/j.msea.2006.03.064 ↗
52. J.E. Spowart, B. Maruyama, D.B. Miracle: Mater. Sci. Eng. A, 2001, vol. 307A, pp. 51–6610.1016/S0921-5093(00)01962-6 ↗
53. P.A. Karnezis, G. Durrant, B. Cantor: Mater. Charact., 1998, vol. 40, pp. 97–10910.1016/S1044-5803(97)00106-X ↗
54. J.T. Curtis, R.P. McIntosh: Ecology, 1950, vol. 31, pp. 434–5510.2307/1931497 ↗
55. J.L. White: Twin Screw Extrusion: Technology and Principles, Hanser Publisher, Munich, Germany, 1990, p. 229
56. C. Rauwendaal: Polymer Extrusion, 3rd rev. ed., Hanser Publisher, New York, NY, 1994, p. 181
57. K.R. Ravi, R.M. Pillai, K.R. Amaranathen, B.C. Pai, and M. Chakraborty: J. Alloy Compd., 2008, vol. 456 (1–2), pp. 201–1010.1016/j.jallcom.2007.02.038 ↗
58. M.C. Fleming: Metall. Mater. Trans. A, 1991, vol. 22 (5), pp. 975–81
59. A. Rogers: Statistical Analysis of Spatial Dispersion: The Quadrat Method, 3rd ed., Pion, London, United Kingdom, 1974, pp. 1–164
60. T.C. Choy: Effective Medium Theory: Principles and Applications, 1st ed., Oxford University Press, Oxford, United Kingdom, 1999, pp. 24–30