Static Recrystallization of Molybdenum After Deformation Below 0.5*T M (K)
Source abstract
Abstract
Currently, the main production route of molybdenum parts is via thermomechanical processing of sintered starting material. This is often carried out in the upper warm-deformation temperature range ( 0.5*TM [K]) and annealing of molybdenum.
The source flagged this abstract for review. Check formulas and completeness against the original publication.
Source: openaire · Quality: needs review · Source record ↗
Source flags: short_text
Source flags: short_text
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. W. Martienssen and H. Warlimont: Springer Handbook of Condensed Matter and Materials Data, 1st ed., Springer, Berlin, Germany, 2005.10.1007/3-540-30437-1 ↗
2. D.L. Bourell and H.J. McQueen: J. Mater. Shaping Technol., 1987, vol. 5, pp. 53–73.10.1007/BF02833686 ↗
3. F.J. Humphreys: J. Mater. Sci., 2001, vol. 36, pp. 3833–54.10.1023/A:1017973432592 ↗
4. F.J. Humphreys: J. Microsc. Oxf., 2004, vol. 213, pp. 247–56.10.1111/j.0022-2720.2004.01297.x ↗
5. S. Primig, H. Leitner, H. Clemens, A. Lorich, W. Knabl, and R. Stickler: Int. J. Refract. Met. Hard Mater., 2010, vol. 28, pp. 703–08.10.1016/j.ijrmhm.2010.03.006 ↗
6. S. Primig, H. Leitner, A. Lorich, W. Knabl, H. Clemens, and R. Stickler: Metall. Mater. Trans. A, in press.
7. J.S. Hirschhorn: J. Less Common Met., 1963, vol. 5, pp. 493–509.10.1016/0022-5088(63)90062-6 ↗
8. R.D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D.J. Jensen, M.E. Kassner, W.E. King, T.R. McNelley, H.J. McQueen, and A.D. Rollett: Mater. Sci. Eng. A, 1997, vol. 238, pp. 219–74.10.1016/S0921-5093(97)00424-3 ↗
9. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd ed., Elsevier, Oxford, U.K., 2004.10.1016/B978-008044164-1/50016-5 ↗
10. R.K. Ray, J.J. Jonas, and R.E. Hook: Int. Mater. Rev., 1994, vol. 39, pp. 129–72.10.1179/095066094790326112 ↗
11. L. Kestens, J.J. Jonas, P. Van Houtte, and E. Aernoudt: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2347–58.10.1007/BF02651889 ↗
12. L. Kestens and J.J. Jonas: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 155–64.10.1007/BF02647756 ↗
13. D. Raabe: Steel Res. Int., 1995, vol. 66, pp. 222–29.10.1002/srin.199501116 ↗
14. C.-G. Oertel, I. Hünsche, W. Skrotzki, A. Lorich, W. Knabl, J. Resch, and T. Trenkwalder: Int. J. Refract. Met. Hard Mater., 2010, vol. 28, pp. 722–27.10.1016/j.ijrmhm.2010.07.003 ↗
15. S. Primig, H. Leitner, A. Lorich, W. Knabl, H. Clemens, and R. Stickler: Pract. Metall., 2011, vol. 48, pp. 344–55.10.3139/147.110136 ↗
16. S.S. Kulkarni, E.A. Starke Jr., and D. Kuhlmann-Wilsdorf: Acta Mater., 1998, vol. 15, pp. 5238–5301.
17. D. Kuhlmann-Wilsdorf: Acta Mater., 1999, vol. 47, pp. 1697–1712.10.1016/S1359-6454(98)00413-3 ↗
18. W.B. Hutchinson, L. Ryde, P.S. Bate, and B. Bacroix: Scripta Mater., 1996, vol. 35, pp. 579–82.10.1016/1359-6462(96)00194-7 ↗
19. I. Samajdar, B. Verlinden, P. Van Houtte, and D. Vanderschueren: Scripta Mater., 1997, vol. 37, pp. 869–74.10.1016/S1359-6462(97)00185-1 ↗
20. M. Oyarzabal, A. Martinez-de-Guerenu, and I. Gutierrez: Mater. Sci. Eng. A, 2008, vol. 485, pp. 200–09.10.1016/j.msea.2007.07.077 ↗
21. D. Raabe and K. Lücke: Z. Metallkd., 1994, vol. 85, pp. 302–06.
22. M.R. Barnett: ISIJ Int., 1998, vol. 38, pp. 78–85.10.2355/isijinternational.38.78 ↗
23. A.A. Gazder, M. Sánchez-Araiza, J.J. Jonas, and E.V. Pereloma: Acta. Mater., 2011, vol. 59, pp. 4847–65.10.1016/j.actamat.2011.04.027 ↗
24. R. Srinivasan, G.B. Viswanathan, V.I. Levit, and H.L. Fraser: Mater. Sci. Eng. A, 2009, vol. 507, pp. 179–89.10.1016/j.msea.2008.12.013 ↗
25. M.R. Barnett and L. Kestens: ISIJ Int., 1999, vol. 39, pp. 923–29.10.2355/isijinternational.39.923 ↗
26. W.B. Hutchinson: Acta Metall., 1989, vol. 37, pp. 1047–56.10.1016/0001-6160(89)90101-6 ↗
27. M.R. Barnett and J.J. Jonas: ISIJ Int., 1997, vol. 37, pp. 697–705.10.2355/isijinternational.37.697 ↗
28. M.R. Barnett and J.J. Jonas: ISIJ Int., 1997, vol. 37, pp. 706–14.10.2355/isijinternational.37.706 ↗
29. K. Eloot, K. Okuda, K. Sakata, and T. Obara: ISIJ Int., 1998, vol. 38, pp. 602–09.10.2355/isijinternational.38.602 ↗
30. I.L. Dillamore and H. Katoh: Metal Sci., 1974, vol. 8, pp. 73–83.10.1179/msc.1974.8.1.73 ↗
31. N. Hansen: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2917–35.10.1007/s11661-001-0167-x ↗
32. D.A. Hughes, N. Hansen, and D.J. Bamann: Scripta Mater., 2003, vol. 48, pp. 147–53.10.1016/S1359-6462(02)00358-5 ↗
33. S. Gourdet and F. Montheillet: Acta Mater., 2003, vol. 51, pp. 2685–99.10.1016/S1359-6454(03)00078-8 ↗
34. D.J. Jensen: Acta Metall. Mater., 1995, vol. 43, pp. 4117–29.10.1016/0956-7151(95)00111-8 ↗
35. D.A. Hughes and N. Hansen: Acta Mater., 1997, vol. 45, pp. 3871–86.10.1016/S1359-6454(97)00027-X ↗
36. D. Raabe, G. Schlenkert, H. Weisshaupt, and K. Lücke: Mater. Sci. Technol., 1994, vol. 10, pp. 299–305.10.1179/026708394790163942 ↗
37. J.K. Solberg, H.J. McQueen, N. Ryum, and E. Nes: Phil. Mag. A, 1989, vol. 60, pp. 447–71.10.1080/01418618908213872 ↗
38. H.J. McQueen, J.K. Solberg, N. Ryum, and E. Nes: Phil. Mag. A, 1989, vol. 60, pp. 473–85.10.1080/01418618908213873 ↗
39. H.J. McQueen: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 345–62.10.1007/s11661-002-0096-3 ↗
40. A. Rosen, M.S. Burton, and G.V. Smith: Trans. TMS-AIME, 1964, vol. 230, pp. 205–15.
41. A. Samet-Meziou, A.L. Helbert-Etter, and T. Baudin: Mater. Sci. Eng. A, 2011, vol. 528, pp. 3829–32.10.1016/j.msea.2011.01.075 ↗