journal article·2011-05Open access

Compaction of Titanium Powders

Stephen J. Gerdemann, Paul D. Jablonski

Abstract

Accurate modeling of powder densification has been an area of active research for more than 60 years. The earliest efforts were focused on linearization of the data because computers were not readily available to assist with curve-fitting methods. In this work, eight different titanium powders (three different sizes of sponge fines <150 μm, <75 μm, and < 45 μm; two different sizes of a hydride-dehydride [HDH] <75 μm and < 45 μm; an atomized powder; a commercially pure [CP] Ti powder from International Titanium Powder [ITP]; and a Ti 6 4 alloy powder) were cold pressed in a single-acting die instrumented to collect stress and deformation data during compaction. From these data, the density of each compact was calculated and then plotted as a function of pressure. The results show that densification of all the powders, regardless of particle size, shape, or chemistry, can be modeled accurately as the sum of an initial density plus the sum of a rearrangement term and a work-hardening term. These last two terms are found to be a function of applied pressure and take the form of an exponential rise.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Powder Metallurgy Techniques and Materials · Advanced materials and composites · Injection Molding Process and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. B.E. Hurles and F.H. (Sam) Froes: Amptiac Quart., 2002, vol. 6 (2), pp. 3–9.
2. P.C. Turner, A. Hartman, J.S. Hansen, and S.J Gerdemann: Low Cost Titanium—Myth or Reality, www.osti.gov/bridge/servlets/purl/899609-PMSrtc/.
3. F.E. Katrak: “Potential Growth in Non-Aerospace Usage of Titanium: and Implications for Titanium Process and Product R&D,” Final Report from Titanium Industry Workshop, Welches, OR, July 30-31, 1997, ASME, Washington, DC, pp. 71–90.
4. F.H. (Sam) Froes, M.N. Gungor, and M.A. Imam: JOM, 2007, vol. 59 (6), pp. 28–31.10.1007/s11837-007-0074-8 ↗
5. R.M. German: Powder Inject. Mold. Int., 2009, vol. 3, no. 4, pp. 21-37.
6. R.M. German: Powder Metallurgy Science, 2nd ed., Metal Powder Industries Federation, Princeton, NJ, 1994.
7. S.J. Gerdemann: Adv. Mater. Proc., 2001, vol. 159, no. 7, pp. 41–43.
8. F.H. Froes, M. Ashraf, and D. Frey, eds.: Cost-Affordable Titanium, TMS, Warrendale, PA, 2004.
9. D.E. Alman and S.J. Gerdemann: Powder Metall. Sci. Technol. Briefs, 2004, vol. 6, no. 1, pp. 11-14.
10. R.P. Seelig and J. Wulff: AIME Trans., 1946, vol. 166, pp. 492-505.
11. J. Liu and D.P. DeLo: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 3117-24.10.1007/s11661-001-0186-7 ↗
12. I. Shapiro and M. Kolthoff: J. Phys. Coll. Chem., 1947, vol. 51, pp. 483-92.10.1021/j150452a015 ↗
13. K. Konopicky: Radex-Rundschau., 1948, vol. 3, pp. 141-48.
14. R.W. Heckel: Trans. Metall. Soc. AIME, 1961, vol. 221, pp. 1001-08.
15. R.W. Heckel: Trans. Metall. Soc. AIME, 1961, vol. 221, pp. 671-675.
16. R. W. Heckel, Trans. Metall. Soc. AIME, 1962, vol. 224, pp. 1073-74.
17. K. Kawakita and K.H. Ludde, Powder Technol., 1970/1971, vol. 4, pp. 61-68.10.1016/0032-5910(71)80001-3 ↗
18. P.J. Denny, Powder Technol., 2002, vol. 127, pp. 162-72.10.1016/S0032-5910(02)00111-0 ↗
19. M.M. Carroll and K.T. Kim: Powder Metall., 1984, vol. 27, no. 3, pp. 153-59.10.1179/pom.1984.27.3.153 ↗
20. R. Panelli and F.A. Filho: Powder Technol., 2001, vol. 114, pp. 255-61.10.1016/S0032-5910(00)00207-2 ↗
21. N.W. Page and M.K. Warpenius: Powder Technol., 1990, vol. 61, pp. 87-94.10.1016/0032-5910(90)80069-B ↗
22. I. Shapiro, Proc. Int. Conf. Exhibition Powder Metall. Partic. Mater., vol. 1, 1997, pp. 2-97-2-114.
23. D.R. Armstrong, S.S. Borys, and R.P. Anderson: US Patent No. 5,779,761, July 14, 1998.
24. D.R. Armstrong, S.S. Borys, and R.P. Anderson: US Patent No. 5,958,106, September 28, 1999.
25. D.R. Armstrong, S.S. Borys, and R.P. Anderson: US Patent No. 6,409,797, June 25, 2002.
26. J. Secondi: Powder Metall., 2002, vol. 45, no. 3, pp. 213-17.10.1179/003258902225006943 ↗
27. P.J. James, Powder Metall., 1977, vol 20, no. 4, pp. 199-204.10.1179/pom.1977.20.4.199 ↗
28. R.L. Hewitt, W. Wallace, and M.C. de Malherberg: Powder Metall., 1974, vol. 17 (33).10.1179/pom.1974.17.33.001 ↗
29. H.F. Fischmeister and E. Arzt, Powder Metall., 1983, vol. 26, no. 2, pp. 82-88.10.1179/pom.1983.26.2.82 ↗