The Development of the Low-Cost Titanium Alloy Containing Cr and Mn Alloying Elements
Source abstract
Abstract
The α + β-type Ti-4.5Al-6.9Cr-2.3Mn alloy has been theoretically designed on the basis of assessment of the Ti-Al-Cr-Mn thermodynamic system and the relationship between the molybdenum equivalent and mechanical properties of titanium alloys. The alloy is successfully prepared by the split water-cooled copper crucible, and its microstructures and mechanical properties at room temperature are investigated using the OM, SEM, and the universal testing machine. The results show that the Ti-4.5Al-6.9Cr-2.3Mn alloy is an α + β-type alloy which is consistent with the expectation, and its fracture strength, yield strength, and elongation reach 1191.3, 928.4 MPa, and 10.7 pct, respectively. Although there is no strong segregation of alloying elements under the condition of as-cast, the segregation of Cr and Mn is obvious at the grain boundary after thermomechanical treatment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. M. Qian: Int. J. Powder Metall., 2010,vol.46,pp.29-44.
2. I.M. Robertson, G.B. Schaffer: Powder Metall., 2010, vol.53, pp.146-162.10.1179/174329009X434293 ↗
3. Hurless BE, Froes FH: Adv. Mater. Processes., 2002, vol. 12, pp. 37-40.
4. B. Gunawarman, M. Niinomi, T. Akahori, T. Souma: Mater. Sci. Eng. C., 2005, vol. 25, pp 304 – 311.10.1016/j.msec.2004.12.015 ↗
5. Lu X G, Li C H, Chen L Y, Qiu A T and Ding W Z:Materials Chemistry and Physics., 2011, vol.129, pp.718– 728.10.1016/j.matchemphys.2011.04.017 ↗
6. B.A. Kolachev, I.S. Pol’kin, and V. D. Talalaev:Titanium Alloys of Various Countries [in Russian], VILS, Moscow, 2000, pp. 169-171.
7. V.T. Witusiewicz, A.A. Bandar, U. Hecht, S. Rex, T.V. Velikanova: J. Alloys Compd, 2008, vol. 465, pp. 64-77.10.1016/j.jallcom.2007.10.061 ↗
8. B.J. Lee:Metall. Trans. A., 1992, vol.24, pp.1919-1933.
9. S.L. Nyakana, J.C. Fanning, and R.R. Boyer: J. Mater. Eng. Perform.,2005,vol.14, pp.799-811.10.1361/105994905X75646 ↗
10. Kazuhiro Matsugi, Takuro Endo, Yong-Bum Choi and Gen Sasaki: Materials Transactions., 2010, vol.51, pp. 740– 748.10.2320/matertrans.F-M2010801 ↗
11. B. Gunawarman, Mitsuo Niinomi, Toshikazu Akahori, Takayuki Souma: Mater. Sci. Eng. C., 2005, vol.25, pp. 304-311.10.1016/j.msec.2004.12.015 ↗
12. O.M. Ivasishin, P.E. Markovsky, Yu.V. Matviychuk: Journal of Alloys and Compounds, 2008, vol.457, pp.296-309.10.1016/j.jallcom.2007.03.070 ↗