Ferrite Grain Size Distributions in Ultra-Fine-Grained High-Strength Low-Alloy Steel After Controlled Thermomechanical Deformation
Source abstract
Abstract
Plane-strain compression testing was carried out above, around, and below the A r3 temperature with the deformation temperature, T def, varying between 1323 K and 973 K (1050 °C and 700 °C), using Gleeble 3500, to develop uniform distribution of ultra-fine ferrite (UFF) grains. Prior austenite (γ) grain structure, developed after soaking at 1473 K (1200 °C), was mixed in nature, comprising both coarse- and fine-γ-grain sizes. Applying heavy deformation in a single pass, just above the austenite-to-ferrite (α) transformation temperature (A r3), and cooling to room temperature resulted in the formation of UFF grain sizes (average α-grain size ~2 to 3 μm), with the largest grain sizes extending up to ~10 to 12 μm. Water quenching just after deformation prevented the coarsening of UFF grains and restricted the largest grain sizes to under 6 μm. Although the ferrite grain structures appeared homogeneous in slowly cooled samples (cooling rate (CR) 1 K/s), careful observation revealed the presence of alternate bands of coarse- (5 to 10 μm) and fine-α grains (<1 to 3 μm). The final α-grain size distributions were explained in view of the starting γ-grain size variation, dynamic recrystallization (DRX) of γ, dynamic strain-induced γ-to-α transformation (DSIT), and DRX of α and grain growth during slow cooling. Electron backscattered diffraction analysis (EBSD) revealed the presence of a large fraction (70 to 80 pct) of high-angle boundaries, having misorientation ≥15 deg. Compared to the use of the single, heavy deformation pass, the application of a number of lighter passes between A e3 and A r3 temperatures is more suitable in industrial rolling conditions, and also has the potential of developing UFF grains with high-angle boundaries.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. T. Gladman: The Physical Metallurgy of Microalloyed Steels, The Institute of Materials, London, 1997, Book 615.
2. D. Chakrabarti, C.L. Davis, and M. Strangwood: Mater. Charact., 2007, vol. 58, pp. 423–38.10.1016/j.matchar.2006.06.014 ↗
3. S.J. Wu and C.L. Davis: J. Microsc., 2004, vol. 213, pp. 262–72.10.1111/j.0022-2720.2004.01311.x ↗
4. D. Chakrabarti, C.L. Davis, and M. Strangwood: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1963–77.10.1007/s11661-008-9535-0 ↗
5. J. Majta, J.G. Lenard, and M. Pietrzyk: ISIJ Int., 1996, vol. 36 (8), pp. 1094–1102.10.2355/isijinternational.36.1094 ↗
6. R. Song, D. Ponge, D. Raabe, J.G. Speer, and D.K. Matlock: Mater. Sci. Eng. A, 2006, vol. 441, pp. 1–17.10.1016/j.msea.2006.08.095 ↗
7. R. Priestner and P.D. Hodgson: Mater. Sci. Technol., 1992, vol. 8, pp. 849–54.10.1179/mst.1992.8.10.849 ↗
8. R. Priestner and E. de los Rios: Met. Technol., 1980, vol. 7, pp. 309–16.10.1179/030716980803287170 ↗
9. R. Priestner, Y.M. Al-Horr, and A.K. Ibraheem: Mater. Sci. Technol., 2002, vol. 18, pp. 973–80.10.1179/026708302225004900 ↗
10. A.K. Ibraheem, R. Priestner, J.R. Bowen, P.B. Prangnell, and F.J. Humphreys: Ironmaking and Steelmaking, 2001, vol. 28 (2), pp. 203–08.10.1179/030192301677975 ↗
11. R. Priestner and A.K. Ibraheem: Mater. Sci. Technol., 2000, vol. 16, pp. 1267–72.10.1179/026708300101507497 ↗
12. M.R. Hickson, R.K. Gibbs, and P.D. Hodgson: ISIJ Int., 1999, vol. 39, pp. 1176–80.10.2355/isijinternational.39.1176 ↗
13. P.D. Hodgson, M.R. Hickson, and R.K. Gibbs: Scripta Mater., 1999, vol. 40, pp. 1179–84.10.1016/S1359-6462(98)00411-4 ↗
14. J.H. Beynon, R.E. Gloss, and P.D. Hodgson: Mater. Forum, 1992, vol. 16, pp. 37–42.
15. P.J. Hurley and P.D. Hodgson: Mater. Sci. Eng. A, 2001, vol. 302, pp. 206–14.10.1016/S0921-5093(00)01823-2 ↗
16. T. Morimoto, I. Chikushi, R. Kurahashi, and J. Yanagimoto: Proc. TMP 2004: 2nd Int. Conf. on Thermomechanical Processing of Steels, Stahleisen Verlag GmbH, Dusseldorf, Germany, 2004, pp. 415–22.
17. H. Beladi, G.L. Kelly, and P.D. Hodgson: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 450–63.10.1007/s11661-006-9080-7 ↗
18. K. Mukherjee, S.S. Hazra, and M. Militzer: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 2145–59.10.1007/s11661-009-9899-9 ↗
19. P.R. Rios, I. de S. Bott, D.B. Santos, T.M.F. de Melo, and J.L. Ferreira: Mater. Sci. Technol., 2007, vol. 23 (4), pp. 417–22.10.1179/174328407X168900 ↗
20. B. Eghbali and A. Abdollah-zadeh: Scripta Mater., 2006, vol. 54, pp. 1205–09.10.1016/j.scriptamat.2005.11.026 ↗
21. H. Beladi, G.L. Kelly, A. Shokouhi, and P.D. Hodgson: Mater. Sci. Eng. A, 2004, vol. 371, pp. 343–52.10.1016/j.msea.2003.12.024 ↗
22. M.R. Hickson, P.J. Hurley, R.K. Gibbs, G.L. Kelly, and P.D. Hodgson: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1019–26.10.1007/s11661-002-0203-5 ↗
23. B. Eghbali and A. Abdollah-Zadeh: Mater. Design, 2007, vol. 28, pp. 1021–26.10.1016/j.matdes.2005.11.006 ↗
24. C. Zhang, N. Xiao, L. Hao, D. Li, and Y. Li: Acta Mater., 2009, vol. 57, pp. 2956–68.10.1016/j.actamat.2009.03.005 ↗
25. T. Sakai and J.J. Jonas: Acta Metall., 1984, vol. 32 (2), pp. 189–209.10.1016/0001-6160(84)90049-X ↗
26. A.I. Fernández, P. Uranga, B. López, and J.M. Rodriguez-Ibabe: Mater. Sci. Eng. A, 2003, vol. 361, pp. 367–76.10.1016/S0921-5093(03)00562-8 ↗
27. G. Kugler and R. Turk: Acta Mater., 2004, vol. 52, pp. 4659–68.10.1016/j.actamat.2004.06.022 ↗
28. T. Sakai, M. Ohashi, K. Chiba, and J.J. Jonas: Acta Metall., 1988, vol. 36, pp. 1781–90.10.1016/0001-6160(88)90246-5 ↗
29. A. Najafi-Zadeh, J.J. Jonas, and S. Yue: Metall. Mater. Trans. A, 1992, vol. 23A, pp. 2607–17.10.1007/BF02658064 ↗
30. P.J. Hurley, B.C. Muddle, and P.D. Hodgson: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2985–93.10.1007/s11661-002-0283-2 ↗
31. D. Chakrabarti, C.L. Davis, and M. Strangwood: Mater. Sci. Technol., 2009, vol. 25, pp. 8939–46.10.1179/174328408X374694 ↗
32. E.I. Poliak and J.J. Jonas: Acta Mater., 1996, vol. 44, pp. 127–36.10.1016/1359-6454(95)00146-7 ↗
33. J.-K. Choi, D.-H. Seo, J.-S. Lee, K.-K. Um, and W.-Y. Choo: ISIJ Int., 2003, vol. 43 (5), pp. 746–54.10.2355/isijinternational.43.746 ↗
34. F. Siciliano, Jr., K. Minami, T.M. Maccagno, and J.J. Jonas: ISIJ Int., 1996, vol. 36, pp. 1500–06.10.2355/isijinternational.36.1500 ↗
35. Y. Misaka and T. Yoshimoto: J. Jpn. Soc. Technol. Plast., 1968, vol. 8, pp. 414–22.
36. J.D. Verhoeven: J. Mater. Eng. Perform., 2000, vol. 9, pp. 286–96.10.1361/105994900770345935 ↗
37. Y.D. Huang, W.Y Yang, and Z.Q. Sun: J. Mater. Process. Technol., 2003, vol. 134, pp. 19–25.10.1016/S0924-0136(02)00272-8 ↗
38. M. Militzer and Y. Brechet: Metall. Mater. Eng. A, 2009, vol. 40A, pp. 2273–82.10.1007/s11661-009-9926-x ↗
39. P.D. Hodgson and R.K. Gibbs: ISIJ Int., 1992, vol. 32, pp. 1329–38.10.2355/isijinternational.32.1329 ↗
40. Y.D. Huang and L. Froyen: J. Mater. Process. Technol., 2002, vol. 124, pp. 216–26.10.1016/S0924-0136(02)00163-2 ↗
41. S.Y. Ok and J.K. Park: Scripta Mater., 2005, vol. 52, pp. 1111–16.10.1016/j.scriptamat.2005.02.003 ↗
42. R.K. Ray, M.P. Butron-Guillen, J. Jonas, and G.E. Ruddle: ISIJ Int., 1992, vol. 32 (2), pp. 203–12.10.2355/isijinternational.32.203 ↗
43. ASTM E384-99 Standard Test Method for Microindentation Hardness of Materials: Annual Book of ASTM Standards, ASTM, West Conshohocken, PA, 2000, vol. 3.01, pp. 437–60.