journal article·2014-05

A Method for the Estimation of the Interface Temperature in Ultrasonic Joining

Tianyu Hu, Soheil Zhalehpour, Andrew Gouldstone, Sinan Muftu, Teiichi Ando

Publisher page

Abstract

Ultrasonic joining of copper foil to 1100 aluminum sheet at nominal joining temperatures of 298 K to 413 K (25 °C to 140 °C) for 1.25 second caused significant copper diffusion into the aluminum sheet, indicating very high diffusivity (D) values of 1.54 × 10−13 to 2.22 × 10−13 m2/s. The D values reflect high excess vacancy concentrations caused by the rapid plastic deformation in the joining surfaces. A method is presented to estimate the actual values of interface temperature from the diffusion data and expected values of vacancy concentrations. The estimated values of interface temperature were about 390 to 410 deg below the equilibrium melting point of aluminum, and in agreement with reported experimental values.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloy Microstructure Properties · Electronic Packaging and Soldering Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. J. B. Jones and J. J. Powers: Weld. J., 1956, vol.35, pp. 761-66.
2. G. G. Harman: Wire Bonding in Microelectronics: Materials, Processes, Reliability and Yield, 2nd ed., McGraw-Hill Book Co., New York, 1997.
3. V.H. Winchell and H.M. Berg: IEEE Trans. Compon., Hybrids, Manuf. Technol., 1978, vol. CHMT-1, No. 3, pp. 211–19.10.1109/TCHMT.1978.1135291 ↗
4. T. Ueoka and J. Tsujino: Jpn. J. Appl. Phys., 2002, vol. 41, no.5B, pp. 3237-42.10.1143/JJAP.41.3237 ↗
5. Y. Yang, G.D. Janaki Ram, and B.E. Stucker: J. Mater. Process. Technol., 2009, vol. 209, pp. 4915–24.10.1016/j.jmatprotec.2009.01.014 ↗
6. M. R. Sriraman, S. S. Babu, and M. Short: Script. Mater., 2010, vol. 62, pp. 560-63.10.1016/j.scriptamat.2009.12.040 ↗
7. D. Erdeniz and T. Ando, Int. J. Mater. Res., 2013, vol. 104, no.4, pp. 386-91.10.3139/146.110874 ↗
8. K. C. Joshi, Weld. J., 1971, vol. 50, pp. 840-48.
9. R. Jahn, R. Cooper, and D. Wilkosz: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 570-83.10.1007/s11661-006-9087-0 ↗
10. A. Panteli, J. D. Robson, I. Brough, and P. B. Prangnell: Mater. Sci. and Eng. A., 2012, vol. 556, pp. 31-42.10.1016/j.msea.2012.06.055 ↗
11. S.S. Lee, T.H. Kim, S.J. Hu, W.W. Cai, J.A. Abell, and J. Li: J. Manuf. Sci. Eng., 2013, vol. 135(2), pp. 021004-1–4-13.
12. M. Okada, S. Shin, M. Miyagi and H. Matsuda: Trans. JIM, 1963, vol. 4, no. 4, pp. 250-56.10.2320/matertrans1960.4.250 ↗
13. T.H. Hazlett and S.M. Ambekar: Weld. Res. Suppl. 1970, vol. 49, pp. 196–200.
14. H.-D. Golde: Ultrasonic Metal Welding: Principles and Applications of High-Grade Bonding Technology, Verlag-Moderne Industrie/Stapla Ultrasonics Corporation, Landsberg am Lech, Germany, 1997.
15. J. Wodara: ZIS-Mitteilungen, 1986, vol. 28, no.1, pp. 102-08.
16. H. Kreye: Weld. Res. Suppl., 1977, vol. 56, pp. 154–58.
17. A. Seeger: Defects in Crystalline Solids, Physical Soc, London, 1955, p. 391.
18. J. Awatani, K. Katagiri, and A. Koreeda: Bull. JSME, 1969, vol. 12(53), pp. 940–46.10.1299/jsme1958.12.940 ↗
19. H. Ohkubo, Y. Shimomura, I. Mukouda, K. Sugio and M. Kiritani: Mater. Sci. and Eng. A, 2003 vol. 350, pp. 30-36.10.1016/S0921-5093(02)00700-1 ↗
20. M. Kiritani, Y. Satoh, Y. Kizuka, K. Arakawa, Y. Ogasawara, S. Arai, and Y. Shimomura: Philos. Mag. Lett., 1999, vol.79, no. 10, pp. 797-804.10.1080/095008399176616 ↗
21. F. E. Fujita: Mater. Sci. Eng. A, 2003, vol. 350, pp. 216-19.10.1016/S0921-5093(02)00690-1 ↗
22. S. Kojima and H. Fuji: Mater. Trans., 2006, vol. 47, no. 2, pp. 298-301.10.2320/matertrans.47.298 ↗
23. J. Schiøtz, T. Leffers, and B. N. Singh: Philos. Mag. Lett., 2001, vol. 91, pp. 301-09.10.1080/09500830110041657 ↗
24. X.L. Wu, B. Li and E. Ma: Appl. Phys. Lett., 2007, vol. 91, pp. 1419081–1419083.
25. M. Zehetbauer, G. Steiner, E. Schafler, A. V. Korznikov, and E. Korznikova: Mater. Sci. Forum, 2006, 503-504, 57-64.10.4028/www.scientific.net/MSF.503-504.57 ↗
26. D.S. Colanto: Ph.D. Thesis, Northeastern University, Boston, MA, 2010.
27. K. Murty, K. Detemple, O. Kanert, and J. Th. M. DeHosson: Met. and Mater. Trans. A, 1998, vol. 29A, pp. 153-59.10.1007/s11661-998-0168-0 ↗
28. G. Thomas and R.H. Willens: Acta Metall., 1964, vol. 12, pp. 191-196.10.1016/0001-6160(64)90187-7 ↗
29. A.V. Kulemin and Y.V. Kholopov: Avt. Svarka, 1980, vol. 6, pp. 13–14.
30. T. Enjo, K. Ikeuchi and H. Fujita, Trans. JWRI, 1986, vol. 15, pp. 289-96.
31. I. E. Gunduz, T. Ando, E. Shattuck, P. Y. Wong, and C. C. Doumanidis: Scr. Mater., 2005, vol. 52, pp. 939-43.10.1016/j.scriptamat.2004.12.015 ↗
32. J.B. Jones, N. Maropis, J.G. Thomas, and D. Bancroft: Weld. J., 1961, vol. 40(7), pp. 289–305.
33. J. Tsujino, T. Ueoka, Y. Asada, S. Taniguchi, and Y. Iwamura: Jpn. J. Appl. Phys., 1988, vol. 37, no. 5B, pp. 2996-3000.
34. S. Yadav and C. Doumanidis: J. Manuf. Process., 2005, vol. 7, no. 2, pp. 153-61.10.1016/S1526-6125(05)70092-X ↗
35. E. de Vries: PhD Thesis, The Ohio State University, 2004.
36. J. D. Goldstein, D. E. Newbury, C. E. Joy, C. E. Lyman, P. Echlin, E. Lifshin, L. Sawyer, and J. R. Michael: Scanning Electron Microscopy and X-ray Microanalysis, 3rd. ed., Springer, New York, NY, 2003.10.1007/978-1-4615-0215-9 ↗
37. P. Shewmon: Diffusion in Solids, TMS, Warrendale, PA, 1989.
38. M. S. Anand, S. P. Murarka, and R. P. Agarwala: J. Appl. Phys., 1965, vol. 36, no.12, pp. 3860-62.10.1063/1.1713963 ↗
39. A. D. King and J. Burke: Acta Metall., 1970, vol.18, no.2, pp. 205-10.10.1016/0001-6160(70)90024-6 ↗
40. R. O. Simmons and R. W. Balluffi: Phys. Rev., 1960, vol.117, no. 1, pp. 52-61.10.1103/PhysRev.117.52 ↗
41. S. Rokkam, A. El-Azab, P. Millett, and D. Wolf: Model. Simul. Mater. Sci. Eng., 2009, vol. 17, p. 064002.10.1088/0965-0393/17/6/064002 ↗