journal article·2013-02

Correlation Between Experimental and Calculated Phase Fractions in Aged 20Cr32Ni1Nb Austenitic Stainless Steels Containing Nitrogen

Matthew P. Dewar, Adrian P. Gerlich

Publisher page

Abstract

A centrifugally cast 20Cr32Ni1Nb stainless steel manifold in service for 16 years at temperatures ranging from 1073 K to 1123 K (800 °C to 850 °C) has been characterized using scanning electron microscopy (SEM), electron probe micro-analysis (EPMA), auger electron spectroscopy (AES), and X-ray diffraction (XRD). Nb(C,N), M23C6, and the silicide G-phases (Ni16Nb6Si7) were all identified in a conventional SEM, while the nitride Z-phase (CrNbN) was observed only in AES. M23C6, Z-phase and G-phase were characterized in XRD. Thermodynamic equilibrium calculations using ThermoCalc Version S, with the TCS Steel and Fe-alloys Database (TCFE6), and Thermotech Ni-based Superalloys Database (TTNI8) were validated by comparing experimental phase fraction results obtained from both EPMA and AES. A computational study looking at variations in the chemical composition of the alloy, and how they affect phase equilibria, was investigated. Increasing the nitrogen concentration is shown to decrease G-phase formation, where it is replaced by other intermetallic phases such as Z-phase and π-phase that do not experience liquation during pre-weld annealing treatments. Suppressing G-phase formation was ultimately determined to be a function of minimizing silicon content, and understabilizing the Nb/(C + 6/7N) ratio.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. T. Shibasaki, T. Mohri, and K. Takemura: Ammon. Plant Saf. Relat. Facil., 1994, vol. 34, pp. 166–76.
2. D.M. Knowles, C.W. Thomas, D.J. Keen, and Q.Z. Chen: Int. J. Press. Vessels Pip., 2004, vol. 81, pp. 499–506.10.1016/j.ijpvp.2003.12.025 ↗
3. R. Singh: Mater. Perform., 2009, vol. 49, pp. 54–58.10.5006/MP2009_48_12-54 ↗
4. S. Shi, J. Lippold, and J. Ramirez: Weld. J., 2010, vol. 89, pp. 210–17.
5. Q.Z. Chen, C.W. Thomas, and D.M. Knowles: Mater. Sci. Eng., A, 2004, vol. 374, pp. 398–408.10.1016/j.msea.2004.03.038 ↗
6. J. Hoffman and J. Magnan: Corrosion 2003, NACE International, Houston, No. 3469, 2003.
7. D.J. Powell, R. Pilkington, and D.A. Miller: Acta Metall., 1988, vol. 36, pp. 713–24.10.1016/0001-6160(88)90105-8 ↗
8. R.C. Ecob, R.C. Lobb, and V.L. Kohler: J. Mater. Sci., 1987, vol. 22, pp. 2867–80.10.1007/BF01086484 ↗
9. H. Hughes: J.I.S.I., 1967, vol. 205, pp. 775–78.
10. J. Erneman, M. Schwind, P. Liu, J.O. Nilsson, H.O. Andrén, and J. Ågren: Acta Mater., 2004, vol. 52, pp. 4337–50.10.1016/j.actamat.2004.06.001 ↗
11. J.H. Shim, E. Kozeschnik, W.S. Jung, S.C. Lee, D.I. Kim, J.Y. Suh, Y.S. Lee, and Y.-W. Cho: CALPHAD, 2010, vol. 34, pp. 105–12.10.1016/j.calphad.2010.01.001 ↗
12. T. Sourmail and H. Bhadeshia: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 23–34.10.1007/s11661-005-0135-y ↗
13. H.K. Danielsen and J. Hald: Mater. Sci. Eng. A, 2009, vol. 505, pp. 169–177.10.1016/j.msea.2008.11.019 ↗
14. H. Danielsen and J. Hald: 9th Liege Conference on Materials for Advanced Power Engineering, Liege, Belgium, 2010 p. 310.
15. G. Knowles: Met. Sci., 1977, vol. 11, pp. 117–22.10.1016/0036-9748(77)90289-7 ↗
16. R. Colwell and J. Hoffman: Corrosion 98, NACE International, Houston, No. 423, 1998.
17. T. Sourmail, H.K.D.H. Bhadeshia, and D.J.C. MacKay: Mater. Sci. Technol., 2002, vol. 18, pp. 655–63.10.1179/026708302225002065 ↗
18. J.P. Shingledecker, P.J. Maziasz, N.D. Evans, and M.J. Pollard: Int. J. Press. Vessels Pip., 2007, vol. 84, pp. 21–28.10.1016/j.ijpvp.2006.09.014 ↗
19. T. Sourmail: Mater. Sci. Technol., 2001, vol. 17, pp. 1–14.10.1179/026708301101508972 ↗
20. C.W. Thomas, K.J. Stevens, and M.J. Ryan: Mater. Sci. Technol., 1996, vol. 12, pp. 469–75.10.1179/026708396790166154 ↗
21. N.D. Evans, P.J. Maziasz, J.P. Shingledecker, and M.J. Pollard: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 3032–41.10.1007/s11661-010-0321-4 ↗
22. W. Jasiński: Adv. Manuf. Sci. Technol., 2008, vol. 32, pp. 69–80.
23. B. Piekarski: Mater. Charact., 2001, vol. 47, pp. 181–86.10.1016/S1044-5803(01)00166-8 ↗
24. K. Shinozaki, H. Kuroki, Y. Nakao, K. Nishimoto, M. Inui, and M. Takahashi: Q. J. Jpn. Weld. Soc., 1998, vol. 16, pp. 223–32.10.2207/qjjws.16.223 ↗
25. P. Landon, R. Caligiuri, and P. Duletsky: Metall. Trans. A, 1983, vol. 14A, pp. 1395–408.10.1007/BF02664823 ↗
26. D. Montgomery and G. Runger: Applied Statistics and Probability for Engineers, 4th ed., Wiley, Hoboken, 2006.
27. S. Shi and J. Lippold: Mater. Charact., 2008, vol. 59, pp. 1029–40.10.1016/j.matchar.2007.08.029 ↗
28. J. Hoffman: Corrosion 2000, NACE International, Houston, No. 512, 2000.
29. F.B. Pickering and S. Keown: Niobium, Proceedings of the International Symposium, H. Stuart, ed., Metallurgical Society AIME, Warrendale, PA, 1981 pp. 1113–1142.