journal article·2014-10

Solidification of Highly Undercooled Hypereutectic Ni-Ni3B Alloy Melt

Feng Liu, Junfeng Xu, Di Zhang, Zengyun Jian

Publisher page

Abstract

The solidification of undercooled Ni-4.5 wt pct B alloy melt was investigated by using the glass fluxing technique. The alloy melt was undercooled up to ΔT p ~ 245 K (245 °C), where a mixture of α-Ni dendrite, Ni3B dendrite, rod eutectic, and precipitates was obtained. If ΔT p < 175 K ± 10 K (175 °C ± 10 °C), the solidification pathway was found as primary transformation and eutectic transformation (L → Ni3B and L → Ni/Ni3B); if ΔT p ≥ 175 K ± 10 K (175 °C ± 10 °C), the pathway was found as metastable eutectic transformation, metastable phase decomposition, and residual liquid solidification (L → Ni/Ni23B6, Ni23B6 → Ni/Ni3B, and Lr → Ni/Ni3B). A high-speed video system was adopted to observe the solidification front of each transformation. It showed that for residual liquid solidification, the solidification front velocity is the same magnitude as that for eutectic transformation, but is an order of magnitude larger than for metastable eutectic transformation, which confirms the reaction as Lr → Ni/Ni3B; it also showed that this velocity decreases with increasing ΔT r, which can be explained by reduction of the residual liquid fraction and decrease of Ni23B6 decomposition rate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Metallic Glasses and Amorphous Alloys · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. T. Koseki: Ph.D. Thesis, Massachusetts Institute of Technology, Cambridge, MA, 1994.
2. K. Nagashio, K. Kuribayashi, and Y. Takamura: Acta Mater., 2000, vol. 48, pp. 3049–57.10.1016/S1359-6454(00)00132-4 ↗
3. O. Funke, G. Phanikumar, P.K. Galenko, L. Chernova, S. Reutzel, M. Kolbe, and D.M. Herlach: J. Cryst. Growth, 2006, vol. 297, pp. 211–22.10.1016/j.jcrysgro.2006.08.045 ↗
4. B.T. Bassler, W.H. Hofmeister, R.J. Bayuzick, R. Gorenflo, T. Bergman, and L. Stockum: Rev. Sci. Instrum., 1992, vol. 63, pp. 3466–71.10.1063/1.1143750 ↗
5. K. Biswas, G. Phanikumar, K. Chattopadhyay, T. Volkmann, O. Funke, D. Holland-Moritz, and D.M. Herlach: Mater. Sci. Eng. A, 2004, vols. 375–377, pp. 464–67.10.1016/j.msea.2003.10.047 ↗
6. Y.Z. Chen, G.C. Yang, F. Liu, N. Liu, H. Xie, and Y.H. Zhou: J. Cryst. Growth, 2005, vol. 282, pp. 490–97.10.1016/j.jcrysgro.2005.05.016 ↗
7. B. Wei, D.M. Herlach, B. Feuerbacher, and F. Sommer: Acta Metall. Mater., 1993, vol. 41, pp. 1801–09.10.1016/0956-7151(93)90200-C ↗
8. J.F. Li, X.L. Li, L. Liu, and S.Y. Lu: J. Mater. Res., 2008, vol. 23, pp. 2139–47.10.1557/JMR.2008.0259 ↗
9. Y.P. Lu, X. Lin, G.C. Yang, J.J. Li, and Y.H. Zhou: J. Appl. Phys., 2008, vol. 104, p. 013535.10.1063/1.2955723 ↗
10. C. Yang, F. Liu, G. Yang, Y. Chen, N. Liu, and Y. Zhou: J. Alloys Compd., 2007, vol. 441, pp. 101–06.10.1016/j.jallcom.2006.09.074 ↗
11. M. Leonhardt, W. Loser, and H.G. Lindenkreuz: Acta Mater., 1999, vol. 47, pp. 2961–68.10.1016/S1359-6454(99)00167-6 ↗
12. N.S. Masoud, R.K. Ali, N.S. Mahboobeh, M. Roohallah, and N. Saber: J. Therm. Anal. Calorim., 2012, vol. 107, pp. 265–69.10.1007/s10973-011-1595-5 ↗
13. J.F. Xu, F. Liu, and B. Dang: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 1401–08.10.1007/s11661-012-1496-7 ↗
14. J. Ajao, S. Hamar-Thibault, and J. Thibault-Desseaux: J. Mater. Sci., 1989, vol. 24, pp. 3647–59.10.1007/BF02385752 ↗
15. J. Ajao and S. Hamar-Thibault: J. Mater. Sci., 1988, vol. 23, pp. 1112–25.10.1007/BF01154022 ↗
16. M. Baricco, E. Ferrari, and L. Battezzati: Mater. Res. Soc. Symp. Proc., 1996, vol. 398, pp. 81–86.10.1557/PROC-398-81 ↗
17. L. Battezzati, C. Antonione, and M. Baricco: J. Alloys Compd., 1997, vol. 247, pp. 164–71.10.1016/S0925-8388(96)02570-4 ↗
18. W.J. Boettinger, S.R. Coriell, and R. Trivedi: in Rapid Solidification Processing: Principles and Technologies, R. Mehrabian and P.A. Parrish, eds., Claitor’s Publishing, Baton Rouge, LA, 1985, p. 13.
19. J.F. Xu, F. Liu, and D. Zhang: J. Mater. Res., 2013, vol. 28, pp. 1891–1902.10.1557/jmr.2013.165 ↗
20. M. Li and K. Kuribayashi: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2999–3008.10.1007/s11661-003-0199-5 ↗
21. P.R. Ohodnicki, J.N.C. Cates, D.E. Laughlin, M.E. McHenry, and M. Widom: Phys. Rev. B, 2008, vol. 78, p. 144414.10.1103/PhysRevB.78.144414 ↗
22. S. Diplas, J. Lehrmann, S. Jørgensen, T. Våland, and J. Taftø: Phil. Mag., 2005, vol. 85, pp. 981–97.10.1080/14786430412331314690 ↗
23. K.A. Jackson and J.D. Hunt: Trans. Metall. Soc., 1966, vol. 236, pp. 1129–42.
24. R. Trivedi, P. Magnin, and W. Kurz: Acta Metall., 1987, vol. 35, pp. 971–79.10.1016/0001-6160(87)90176-3 ↗
25. J.F. Li and Y.H. Zhou: Acta Mater., 2005, vol. 53, pp. 2351–59.10.1016/j.actamat.2005.01.042 ↗
26. D. Turnbull: J. Chem. Phys., 1952, vol. 20, pp. 411–24.10.1063/1.1700435 ↗