Strain-Controlled Low-Cycle Fatigue Behavior of Friction Stir-Welded AZ31 Magnesium Alloy
Source abstract
Abstract
Strain-controlled low-cycle fatigue (LCF) behavior of friction stir-welded (FSW) AZ31 joints, produced at rotation rates of 800 and 3500 rpm, was studied. The joints exhibited symmetric hysteresis loops, whereas asymmetric loops were observed for the parent material (PM). The fatigue resistance of the FSW joints was slightly improved as the rotation rate increased, and both the FSW joints possessed a fatigue life similar to that of the PM at the low strain amplitude of 0.1 pct. The obtained fatigue data for the PM and FSW joints can be well described using the Coffin–Manson and Basquin’s relationships. For the FSW joints, during LCF deformation, the \( \left\{ {10\bar{1}2} \right\} \) twinning originated from the nugget zone (NZ)/thermomechanically affected zone (TMAZ) boundary and then propagated to the NZ interior. This was attributed to different textures in these regions: the center of the NZ exhibited a hard orientation, whereas a soft orientation was observed in the region around the NZ/TMAZ boundary. The fatigue cracks initiated at the bottom of the joints and propagated along the NZ/TMAZ boundary or the NZ adjacent to the NZ/TMAZ boundary.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. R.S. Mishra, Z.Y. Ma: Mater. Sci. Eng. A, 2005, vol. 50, pp. 1–78.10.1016/j.mser.2005.07.001 ↗
2. W. Woo, H. Choo, D.W. Brown, P. K. Liaw, Z. Feng: Scripta Mater., 2006, vol. 54, pp. 1859–64.10.1016/j.scriptamat.2006.02.019 ↗
3. S.H.C. Park, Y.S. Sato, H. Kokawa: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 987–94.10.1007/s11661-003-0228-4 ↗
4. W. Yuan, R.S. Mishra, B. Carlson, R.K. Mishra, R. Verma, R. Kubic: Scripta Mater., 2011, vol. 64, pp. 580–83.10.1016/j.scriptamat.2010.11.052 ↗
5. J.S. Liao, N. Yamamoto, K. Nakata: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 2212–19.10.1007/s11661-009-9921-2 ↗
6. S. Mironov, Q. Yang, H. Takahashi, I. Takahashi, K. Okamoto, Y.S. Sato, H. Kokawa: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 1016–24.10.1007/s11661-009-0158-x ↗
7. U.F.H.R. Suhuddin, S. Mironov, Y.S. Sato, H. Kokawa, C.W. Lee: Acta Mater., 2009, vol. 57, pp. 5406–18.10.1016/j.actamat.2009.07.041 ↗
8. W. Woo, H. Choo, M.B. Prime, Z. Feng, B. Clausen: Acta Mater., 2008, vol. 56, pp. 1701–11.10.1016/j.actamat.2007.12.020 ↗
9. L. Commin, M. Dumont, J.E. Masse, L. Barrallier: Acta Mater., 2009, vol. 57, pp. 326–34.10.1016/j.actamat.2008.09.011 ↗
10. J. Yang, B.L. Xiao, D. Wang, Z.Y. Ma: Mater. Sci. Eng. A, 2010, vol. 527, pp. 708–14.10.1016/j.msea.2009.09.044 ↗
11. W.B. Lee, Y.M. Yeon, S.B. Jung: Mater. Sci. Technol., 2003, vol. 19, pp. 785–90.10.1179/026708303225001867 ↗
12. S. Lin, S. Kim, C.G. Lee, C.D. Yim, S.J. Kim: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1609–12.
13. N. Afrin, D.L. Chen, X. Cao, M. Jahazi: Mater. Sci. Eng. A, 2008, vol. 472, pp. 179–86.10.1016/j.msea.2007.03.018 ↗
14. J. Yang, D. Wang, B.L. Xiao, and Z.Y. Ma: 8 th International Friction Stir Welding Symposium, 2010, pp. 1–11.
15. M.A. Gharacheh, A.H. Kokabi, G.H. Daneshi, B. Shalchi Amirkhiz, R. Sarrafi: Int. J. Mach. Tool Manuf., 2006, vol. 46, pp. 1983–87.10.1016/j.ijmachtools.2006.01.007 ↗
16. M. Tsujikawa, H. Somekawa, K. Higashi, H. Iwaskai, T. Hasegawa, A. Mizuta: Mater. Trans., 2004, vol. 45, pp. 419–22.10.2320/matertrans.45.419 ↗
17. S.M. Chowdhury, D.L. Chen, S.D. Bhole, and X. Cao: Fatigue, 2010, pp. 825–33.10.1016/j.proeng.2010.03.089 ↗
18. G. Padmanaban, V. Balasubramanian: Mater. Des., 2010, vol. 31, pp. 3724–32.10.1016/j.matdes.2010.03.013 ↗
19. G. Padmanaban, V. Balasubramanian, G.M. Reddy: J. Mater. Process. Technol., 2011, vol. 211, pp. 1224–33.10.1016/j.jmatprotec.2011.02.003 ↗
20. A.H. Feng, D.L. Chen, Z.Y. Ma: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 957–71.10.1007/s11661-009-0152-3 ↗
21. A.H. Feng, D.L. Chen, Z.Y. Ma: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 2626–41.10.1007/s11661-010-0279-2 ↗
22. J. Yang, B.L. Xiao, D. Wang, Z.Y. Ma: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 517–30.10.1007/s11661-012-1373-4 ↗
23. S.H.C. Park, Y.S. Sato, H. Kokawa: Scripta Mater., 2003, vol. 49, pp. 161–66.10.1016/S1359-6462(03)00210-0 ↗
24. S. Xu, X. Deng: Acta Mater., 2008, vol. 56, pp. 1326–41.10.1016/j.actamat.2007.11.016 ↗
25. X.X. Zhang, B.L. Xiao, Z.Y. Ma: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 3229–39.10.1007/s11661-011-0730-z ↗
26. T.A. Samman, X. Li, S.G. Chowdhury: Mater. Sci. Eng. A, 2010, vol. 527, pp. 3450–63.10.1016/j.msea.2010.02.008 ↗
27. Z. Zhang, M.P. Wang, N. Jiang, S. Zhu: J. Alloy Compd., 2012, vol. 512, pp. 73–78.10.1016/j.jallcom.2011.09.021 ↗
28. J. Scott, M. Miles, D. Fullwood, B. Adams, A. Khosravani, R.K. Mishra: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 512–16.10.1007/s11661-012-1405-0 ↗
29. S.L. Couling, J.F. Pashak, L. Sturkey: Trans. ASM, 1958, vol. 51, pp. 94–107.
30. R.L. Xin, B. Li, A.L. Liao, Z. Zhou, Q. Liu: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 2500–08.10.1007/s11661-012-1080-1 ↗
31. S.H. Park, S.G. Hong, W. Bang, C.S. Lee: Mater. Sci. Eng. A, 2010, vol. 527, pp. 417–23.10.1016/j.msea.2009.08.044 ↗
32. X.Z. Lin, D.L. Chen: Mater. Sci. Eng. A, 2008, vol. 496, pp. 106–13.10.1016/j.msea.2008.05.016 ↗
33. M. Gotting, B. Scholtes: Int. J. Mater. Res., 2006, vol. 97, pp. 1378–83.10.3139/146.101381 ↗
34. S. Begum, D.L. Chen, S. Xu, A.A. Luo: Mater. Sci. Eng. A, 2009, vol. 517, pp. 334–43.10.1016/j.msea.2009.04.051 ↗
35. F. Lv, F. Yang, Q.Q. Duan, Y.S. Yang, S.D. Wu, S.X. Li, Z.F. Zhang: Int. J. Fatigue, 2011, vol. 33, pp. 672–82.10.1016/j.ijfatigue.2010.10.013 ↗
36. S. Begum, D.L. Chen, S. Xu, A.A. Luo: Int. J. Fatigue, 2009, vol. 31, pp. 726–35.10.1016/j.ijfatigue.2008.03.009 ↗
37. U. Noster, B. Scholtes: Z. Metallk., 2003, vol. 94, pp. 559–63.10.3139/146.030559 ↗
38. S. Begum, D.L. Chen, S. Xu, A.A. Luo: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 3014–24.10.1007/s11661-008-9677-0 ↗
39. G.E. Dieter: Mechanical Metallurgy, 3rd ed., McGraw-Hill, New York, 1986.
40. Z.J. Zhang, P. Zhang, L.L. Li, Z.F. Zhang: Acta Mater., 2012, vol. 60, pp. 3113–27.10.1016/j.actamat.2012.02.016 ↗
41. F. Yang, S.M. Yin, S.X. Li, Z.F. Zhang: Mater. Sci. Eng. A, 2008, vol. 491, pp. 131–36.10.1016/j.msea.2008.02.003 ↗
42. L.J. Chen, C.Y. Wang, W. Wu, Z. Liu, G.M. Stoica, L. Wu, P.K. Liaw: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 2235–41.10.1007/s11661-007-9181-y ↗
43. K. Gall, G. Biallas, H.J. Maier, P. Gullett, M.F. Horstemeyer, D.L. McDowell: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 321–31.10.1007/s11661-004-0133-5 ↗
44. K. Tokaji, M. Kamakura, Y. Ishiizumi, N. Hasegawa: Int. J. Fatigue, 2004, vol. 26, pp. 1217–24.10.1016/j.ijfatigue.2004.03.015 ↗
45. T.S. Shih, W.S. Liu, Y.J. Chen: Mater. Sci. Eng. A, 2002, vol. 325, pp. 152–62.10.1016/S0921-5093(01)01411-3 ↗
46. G.E. Dieter: Mechanical Metallurgy, McGraw-Hill Series, McGraw-Hill, New York, 1986.
47. C. Laird: Fatigue Crack Propagation, ASTM STP 415, ASTM, West Conshohocken, PA, 1967, pp. 131–68.10.1520/STP47230S ↗
48. L. Wu, A. Jain, D.W. Brown, G.M. Stoica, S.R. Agnew, B.Clausen, D.E. Fielden, P.K. Liaw: Acta Mater., 2008, vol. 56, pp. 688–95.10.1016/j.actamat.2007.10.030 ↗
49. Y.N. Wang, J.C. Huang: Acta Mater., 2007, vol. 55, pp. 897–905.10.1016/j.actamat.2006.09.010 ↗