Larson–Miller Failure Modeling of Aluminum in Fire
Source abstract
Abstract
This article presents a modeling approach based on the Larson–Miller parameter (LMP) for creep rupture to predict failure of aluminum in fire. The modified Larson–Miller model can predict time-dependent tensile rupture or compressive buckling of aluminum plate under combined loading and one-sided heating by fire. The model applies the LMP to determine the failure time and failure temperature of aluminum exposed to fire. Fire structural tests were performed on an aluminum alloy (5083-H116) subjected to different load levels and heat flux conditions (with maximum temperatures of 473 to 688 K (200 to 415 °C)) to validate the Larson–Miller modeling approach. The tests reveal that the Larson–Miller model can accurately predict tensile and compressive failure of aluminum plates (with and without surface insulation) in fire in terms of critical temperature and time.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fire effects on concrete materials · Fire dynamics and safety research · Engineering and Material Science Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. J. Suzuki, Y. Ohmiya, T. Wakamatsu, K. Harada, S Yuasa, and M. Kohno: Fire Sci. Technol., 2005, vol. 24, pp. 237–55.10.3210/fst.24.237 ↗
2. J. Maljaars, J. Fellinger, and F. Soetens: J. Fire Safety, 2005, vol. 50, pp. 261−78.
3. J. Maljaars and F. Soetens: J. Inter. Assoc. for Bridge & Struc. Eng., 2006, vol. 92, pp. 256–57.
4. J. Maljaars, L. Twilt, and F. Soetens: Proc. Structures in Fire 2006, Averio, 2006, pp. 75–88.
5. J. Maljaars: Proc. 5th Int. Conf. on Thin-Walled Structures 2008, Brisbane, 2008, pp. 705–12.
6. J. Maljaars, F. Soetens, and H.H. Snijder: Thin-Walled Structures, 2009, vol. 47, pp. 1418–28.10.1016/j.tws.2008.06.003 ↗
7. J. Maljaars, F. Soetens, and L. Katgerman: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 778–89.10.1007/s11661-008-9470-0 ↗
8. Bausano, J.J. Lesko, and S.S. Case: “The Comparison of the Response of 6061 Aluminium and a Glass/VE Composite to Simulated Fire Exposure Conditions,” Materials Response Group, Virginia Polytechnic Institute and State University, Blacksburg, VA.
9. E. Kandare, S. Feih, A. Kootsookos, Z. Mathys, B.Y. Lattimer, and Mouritz: Mater. Sci. Eng. A, 2010, vol. 527, pp. 1185–93.10.1016/j.msea.2009.10.010 ↗
10. F.R. Larson and J. Miller: Trans. ASTM, 1952, vol. 74, pp. 765–75.
11. J.G. Kaufman, Z. Long, and S. Ningileri: Application of Time-Temperature-Stress Parameters to High Temperature Performance of Aluminium Alloys, TMS, Warrendale, PA, 2007.
12. J.L. Straalsund, R.L. Fish, and G.D. Johnson: Nucl. Technol., 1975, vol. 25, p. 531.10.13182/NT75-A24390 ↗
13. J.J.M. Órfão: AIChe J., 2007, vol. 53, pp. 2905–15.10.1002/aic.11296 ↗
14. S. Arai, H. Murabayashi, A. Tanabe, K. Yoshida, and S. Sumida: J. Nucl. Technol., 1987, vol. 24, pp. 214–19.10.3327/jnst.24.214 ↗
15. S. Feih, Z. Mathys, A.G. Gibson, and A.P. Mouritz: Compos. Sci. Technol., 2007, vol. 67, pp. 551–64.10.1016/j.compscitech.2006.07.038 ↗
16. A.G. Gibson, Y.-S. Wu, J.T. Evans, and A.P. Mouritz: J. Compos. Mater., 2006, vol. 40, pp. 639–58.10.1177/0021998305055543 ↗
17. R.W. Hertzberg: Deformation and Fracture Mechanics of Engineering Materials, 3rd ed., Wiley, New York, NY, 1937, p. 175.