Correlation of Surface Roping with Through-Thickness Microtextures in an AA6xxx Sheet
Source abstract
Abstract
Strain-induced surface roughness was quantitatively correlated with microtexture spatial distributions from the surface to the midthickness of a strongly roping AA6016 sheet. The microtexture variations through the sheet were measured by acquiring a series of large area electron backscatter diffraction (EBSD) scans at intervals of about the grain size. The orientations of the different layers were translated into out-of-plane strains using a crystal plasticity model for comparison with the surface roping. The spatial distributions (particularly the characteristic wavelengths) of the microtexture layers were determined by areal auto-correlation functions, and quantitatively compared to the surface appearance by correlation coefficients. The results show that texture banding of Cube/Goss components along the rolling direction is present from the surface to midthickness but with significant variations from one grain layer to another. The wavelength correlation coefficient exhibits a maximum at about 55 μm, or 2 grain thicknesses, below the surface. It is shown that the spatial distribution of Cube/Goss components of the first three or four surface grain layers plays an important role in strong roping of AA6016 sheets.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Microstructure and mechanical properties · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. R. Wright: Metall. Trans., 1972, vol. 3, pp. 83–91.10.1007/BF02680588 ↗
2. R.D. Knutsen: Mater. Sci. Forum, 2007, vol. 550, pp. 65–74.10.4028/www.scientific.net/MSF.550.65 ↗
3. H.-J. Shin, J.-K. An, S.H. Park, and D.N. Lee: Acta Mater., 2003, vol. 51, pp. 4693–4706.10.1016/S1359-6454(03)00187-3 ↗
4. O. Engler, M.Y. Huh, and C. Tomé: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 3127–39.10.1007/s11661-005-0084-5 ↗
5. P.D. Wu, H. Jin, Y. Shi, and D.J. Lloyd: Mater. Sci. Eng., A, 2006, vol. 423, pp. 300–05.10.1016/j.msea.2006.02.043 ↗
6. A. Beaudoin, J. Bryant, and D. Korzekwa: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2323–32.10.1007/s11661-998-0109-y ↗
7. G.J. Baczynski, R. Guzzo, M.D. Ball, and D.J. Lloyd: Acta Mater., 2000, vol. 48, pp. 3361–76.10.1016/S1359-6454(00)00141-5 ↗
8. M.R. Stoudt and R. Ricker: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2883–89.10.1007/s11661-002-0273-4 ↗
9. P.D. Wu, D.J. Lloyd, A. Bosland, H. Jin, and S.R. MacEwen: Acta Mater., 2003, vol. 51, pp. 1945–57.10.1016/S1359-6454(02)00600-6 ↗
10. H. Jin and D.J. Lloyd: Mater. Sci. Eng., 2005, vol. 43, pp. 112–19.10.1016/j.msea.2005.04.039 ↗
11. Y.S. Choi, H.R. Piehler, and A.D. Rollett: Mater. Characterization, 2007, vol. 58, pp. 901–08.10.1016/j.matchar.2006.09.003 ↗
12. T.A. Bennett, R.H. Petrov, and L. Kestens 2009 Scripta Mater. 61:733–36.10.1016/j.scriptamat.2009.06.016 ↗
13. R. Becker: Acta Mater., 1998, vol. 46, pp. 1383–401.10.1016/S1359-6454(97)00182-1 ↗
14. P.D. Wu and D.J. Lloyd: Acta Mater., 2004, vol. 52, pp. 1785–98.10.1016/j.actamat.2003.12.039 ↗
15. P.S. Lee, H.R. Piehler, B.L. Adams, G. Jarvis, H. Hampel, and A.D. Rollett: J. Mater. Process. Technol., 1998, vols. 80–81, pp. 315–19.10.1016/S0924-0136(98)00189-7 ↗
16. H. Jin, P.D. Wu, M.D. Ball, and D.J. Lloyd: Mater. Sci. Technol., 2005, vol. 21, pp. 419–28.10.1179/174328405X36575 ↗
17. M. Kamaya, J. Quinta Da Fonseca, L.M. Li, and M. Peuss: Appl. Mech. Mater., 2007, vols. 7–8, pp. 173–79.10.4028/www.scientific.net/AMM.7-8.173 ↗
18. A. Guillotin, G. Guiglionda, C. Maurice, and J.H. Driver: Mater. Characterization, 2010, vol. 61, pp. 1119–25.10.1016/j.matchar.2010.07.005 ↗
19. P.D. Wu, D.J. Lloyd, and S.R. MacEwen: Scripta Mater., 2003, vol. 48, pp. 1243–48.10.1016/S1359-6462(03)00052-6 ↗
20. S. Kusters, M. Seefeldt, and P. Van Houtte: Ceram. Trans., 2008, vol. 200, pp. 731–42.10.1002/9780470444191.ch82 ↗
21. P.S. Lee, G. Jarvis, A.D. Rollett, H.R. Piehler, and B.L. Adams: Proc. Automotive Alloy 1999, TMS, Warrendale, PA, 2000, pp. 161–69.10.1002/9781118787601.ch13 ↗
22. Y.S. Choi: Ph.D. Thesis, Carnegie Mellon University, Pittsburgh, PA, 2001.
23. A.W.F. Smith: Ph.D. Thesis, Manchester University, Manchester, UK, 2002.
24. Y.S. Choi, A.D. Rollett, and H.R. Piehler: Mater. Trans., 2006, vol. 47, pp. 1313–16.10.2320/matertrans.47.1313 ↗
25. A. Guillotin, G. Guiglionda, C. Maurice, and J.H. Driver: Proc. ICAA12, Yokohama, Japan, Sept. 2010, Japan Institute of Light Metals, Tokyo, Japan, 2010 pp. 113–18.