journal article·2014-08Open access

Strengthening Micromechanisms in Cold-Chamber High-Pressure Die-Cast Mg-Al Alloys

Kun V. Yang, Carlos H. Cáceres, Mark A. Easton

Abstract

The contributions from grain boundary, solid solution, and dispersion strengthening to the yield strength of cast-to-shape specimens were calculated for seven binary alloys with compositions ranging from very dilute (0.5 mass pct Al) to concentrated (12 mass pct Al). Experimentally and theoretically determined parameters were used to explicitly account for the different microstructures at the skin and core regions of specimens' cross sections. Microhardness maps were used to identify the specimens' skin. The specimens' strength was calculated as the weighted addition of the respective strengths of skin and core. The calculated strengths reproduced well the experimental values for the dilute alloys but underestimated the strength of the most concentrated alloys by as much as similar to 35 MPa. It is argued that the presence of the percolating network of Mg17Al12 eutectic intermetallic, particularly in the skin region, in conjunction with highly efficient dispersion hardening due to the convoluted shape of the intermetallics, accounts for the shortfall in the calculated strength.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. S. Kleiner, E. Ogris, O. Beffort, P.J. Uggowitzer, Adv. Eng. Mater., 5 (2003) 653-58.10.1002/adem.200300358 ↗
2. M.S. Dargusch, K. Pettersen, K. Nogita, M.D. Nave, G.L. Dunlop, Mater. Trans. (JIM), 47 (2006) 977-82.10.2320/matertrans.47.977 ↗
3. A.K. Dahle, Y.C. Lee, M.D. Nave, P.L. Schaffer, D.H. StJohn, J. Light Met., 1 (2001) 61-72.10.1016/S1471-5317(00)00007-9 ↗
4. E. Aghion, N. Moscovitch, A. Arnon, Mater. Sci. Eng. A, 447 (2007) 341-46.10.1016/j.msea.2006.10.065 ↗
5. C.H. Cáceres, J.R. Griffiths, A.R. Pakdel, C.J. Davidson, Mater. Sci. Eng. A, 402 (2005) 258-68.10.1016/j.msea.2005.04.042 ↗
6. C.H. Cáceres, W.J. Poole, A.L. Bowles, C.J. Davidson, Mater. Sci. Eng. A, 402 (2005) 269-77.10.1016/j.msea.2005.04.024 ↗
7. W.P. Sequeira, G.L. Dunlop, and M.T. Murray: in 3rd International Magnesium Conference, G.W. Lorimer, ed., The Institute of Metals, London, Manchester, 1997, pp. 63–73.
8. W.P. Sequeira, M.T. Murray, G.L. Dunlop, and D.H. StJohn: TMS Symposium on Automotive Alloys, The Minerals Metals and Materials Society (TMS) Warrendale, PA, 1997, pp. 169–83.
9. J.P. Weiler, J.T. Wood, R.J. Klassen, R. Berkmortel, and G. Wang: in Magnesium Technology 2005, N.R. Neelameggham, H.I. Kaplan, and B.R. Powell, eds., The Minerals, Metals and Materials Society (TMS), Warrendale, PA, 2005, pp. 191–96.
10. J.P. Weiler, J.T. Wood, R.J. Klassen, R. Berkmortel, G. Wang, Mater. Sci. Eng. A, 419 (2006) 297-305.10.1016/j.msea.2006.01.034 ↗
11. D.G. Leo Prakash, D. Regener, J. Alloys Compd., 464 (2008) 133-37.10.1016/j.jallcom.2007.09.134 ↗
12. D.G.L. Prakash, D. Regener, J. Alloys Compd., 461 (2008) 139-46.10.1016/j.jallcom.2007.07.017 ↗
13. S. Sannes, H. Gjestland, H. Westengen, H.I. Laukli, and O. Lohne: in 6th International Conference on Magnesium Alloys and Their Applications, K.U. Kainer, ed., DGM, Willey-VCH, Wolfsburg, 2003, pp. 725–31.10.1002/3527603565.ch115 ↗
14. E. Aghion, N. Lulu, Mater. Charact., 61 (2010) 1221-26.10.1016/j.matchar.2010.07.015 ↗
15. A.V. Nagasekhar, M.A. Easton, C.H. Cáceres, Adv. Eng. Mater., 11 (2009) 912-19, DOI:10.1002/adem.200900175.10.1002/adem.200900175 ↗
16. K.V. Yang, M.A. Easton, C.H. Caceres, Adv. Eng. Mater., 15 (2013) 302-07, doi: 10.1002/adem.201200188.10.1002/adem.201200188 ↗
17. A.L. Bowles, J.R. Griffiths, and C.J. Davidson: in Magnesium Technology 2001, J. Hryn, ed., The Minerals, Metals and Materials Society (TMS), Warrendale, PA, 2001, pp. 161–68.10.1002/9781118805497.ch29 ↗
18. Z. Shan, A.M. Gokhale, Mater. Sci. Eng. A, 361 (2003) 267-74.10.1016/S0921-5093(03)00529-X ↗
19. H.I. Laukli, O. Lohne, S. Sannes, H. Gjestland, L. Arnberg, Int. J. Cast Met. Res., 16 (2003) 515-21.10.1080/13640461.2003.11819629 ↗
20. H.I. Laukli, C.M. Gourlay, A.K. Dahle, Metall. Mater. Trans. A, 36A (2005) 805-18.10.1007/s11661-005-1011-5 ↗
21. K.V. Yang, M.A. Easton, C.H. Caceres, Mater. Sci. Eng. A, 580 (2013) 191-95, doi: 10.1016/j.msea.2013.05.017.10.1016/j.msea.2013.05.017 ↗
22. K.V. Yang, C.H. Cáceres, A.V. Nagasekhar, M.A. Easton, Mater. Sci. Eng. A, 542 (2012) 49-55, doi: 10.1016/j.msea.2012.02.029.10.1016/j.msea.2012.02.029 ↗
23. D.J. Sakkinen: “Physical Metallurgy of Magnesium Die Casting Alloys”, SAE Technical Paper 940779, SAE, Warrendale, PA, 1994, pp. 558–69.10.4271/940779 ↗
24. M.A. Easton, H. Kaufmann, W. Fragner, Mater. Sci. Eng. A, 420 (2006) 135-43.10.1016/j.msea.2006.01.078 ↗
25. E. Aghion and B. Bronfin: in Third Int. Magnesium Conf., G.W. Lorimer, ed., The Institute of Materials, Manchester, 1996, pp. 313–25.
26. T. Aune, H. Westengen, and T. Ruden: “Mechanical Properties of Energy Absorbing Magnesium Alloys”, SAE Technical Paper 930418, SAE, Warrendale, PA, 1993, pp. 51–57.10.4271/930418 ↗
27. K.V. Yang, C.H. Caceres, M.A. Easton, Mater. Sci. Eng. A, 580 (2013) 355-61, doi: 10.1016/j.msea.2013.05.018.10.1016/j.msea.2013.05.018 ↗
28. K.V. Yang, C.H. Cáceres, A.V. Nagasekhar, M.A. Easton, Model. Simul. Mater. Sci., 20 (2012) 1-9, DOI:10.1088/0965-0393/20/2/024010.10.1088/0965-0393/20/2/024010 ↗
29. A.V. Nagasekhar, C.H. Cáceres, C. Kong, Mater. Charact., 61 (2010) 1035-42, DOI:10.1016/j.matchar.2010.06.007.10.1016/j.matchar.2010.06.007 ↗
30. C.H. Cáceres, J.R. Griffiths, C.J. Davidson, C.L. Newton, Mater. Sci. Eng. A, 325 (2002) 344-55.10.1016/S0921-5093(01)01467-8 ↗
31. J.P. Weiler, J.T. Wood, R.J. Klassen, R. Berkmortel, G. Wang, J. Mater Sci., 40 (2005) 5999-6005.10.1007/s10853-005-1295-2 ↗
32. C.H. Cáceres, G.E. Mann, J.R. Griffiths, Metall. Mater. Trans. A, 42A (2011) 1950-59, DOI:10.1007/s11661-010-0599-2.10.1007/s11661-010-0599-2 ↗
33. C.D. Lee, Mater. Sci. Eng. A, 459 (2007) 355-60.10.1016/j.msea.2007.01.008 ↗
34. Y.-H. Wei, L.-F. Hou, L.-J. Yang, B.-S. Xu, M. Kozuka, H. Ichinose, J. Mater. Process. Technol., 209 (2009) 3278-84.10.1016/j.jmatprotec.2008.07.034 ↗
35. B. Zhang, A.V. Nagasekhar, T. Sivarupan, C.H. Caceres, Adv. Eng. Mater., 15 (2013) 1059-67, doi: 10.1002/adem.201300138.10.1002/adem.201300138 ↗
36. D. Amberger, P. Eisenlohr, M. Göken, Acta Mater., 60 (2012) 2277-89.10.1016/j.actamat.2012.01.017 ↗
37. B.S. Shin, J.W. Kwon, D.H. Bae, Met. Mater. Int., 15 (2009) 203-07.10.1007/s12540-009-0203-8 ↗
38. K.V. Yang, C.H. Cáceres, M.A. Easton, M.A. Gibson, Kovove Materialy, 49 (2011) 207-12, DOI:10.4149/km_2011_3_207.10.4149/km_2011_3_207 ↗
39. A.V. Nagasekhar, C.H. Caceres, and M.A. Easton: in Magnesium Technology 2008, M.O. Pekguleryuz, N.R. Neelameggham, R.S. Beals, and E.A. Nyberg, eds., The Minerals, Metals & Materials Society (TMS), Warrendale, PA, 2008, pp. 343–46.
40. W. Kurz, D. Fisher, Fundamentals of Solidification, 4th ed., Trans. Tech. Publications, Switzerland, 1998.
41. M.A. Easton, D.H. StJohn, Mater. Sci. Technol., 16 (2000) 993-1000.10.1179/026708300101508946 ↗
42. D. Mirković, R. Schmid-Fetzer, Metall. Mater. Trans. A, 40A (2009) 974-81.10.1007/s11661-009-9788-2 ↗
43. T.L. Chia, M.A. Easton, S.M. Zhu, M.A. Gibson, N. Birbilis, J.F. Nie, Intermetallics, 17 (2009) 481-90.10.1016/j.intermet.2008.12.009 ↗
44. M.S. Dargusch, M.A. Easton, S.M. Zhu, G. Wang, Mater. Sci. Eng. A, 523 (2009) 282-88.10.1016/j.msea.2009.06.015 ↗
45. M. Zhou, A. Yu, N.Y. Li, H. Hu, and R. Bowers: in Magnesium Technology 2009, A.A. Luo, N.R. Neelameggham, R. S. Beals, eds., The Minerals, Metals & Materials Society (TMS), Warrendale, PA, 2006, pp. 121–27.
46. A. Stich and H.G. Haldenwanger: in Magnesium 2000 (2nd Israeli Intl. Conf. on Magnesium Science and Technology), E. Aghion and D. Eliezer, eds., MRI (Beer-Sheva), Dead Sea, 2000, pp. 27–34.
47. C.H. Cáceres, D.M. Rovera, J. Light Met., 1(3) (2001) 151-56.10.1016/S1471-5317(01)00008-6 ↗
48. F.E. Hauser, P.R. Landon, J.E. Dorn, AIME Trans., 206 (1956) 589-93.
49. N. Hansen, Acta Metall., 17 (1969) 637-42.10.1016/0001-6160(69)90123-0 ↗
50. U.F. Kocks, A.S. Argon, M.F. Ashby, Prog. Mater. Sci., 19 (1975) 1-278.10.1016/0079-6425(75)90005-5 ↗
51. T.N. Baker, in: T.N. Baker (Ed.) Yield, Flow and Fracture of Polycrystals, Applied Science Publishers, London, 1983, pp. 235-73.
52. N. Hansen, B. Ralph, Acta Metall., 34 (1986) 1955-62.10.1016/0001-6160(86)90254-3 ↗
53. K.J. Kurzydlowski, J.J. Bucki, Acta Metall. Mater., 41 (1993) 3141-46.10.1016/0956-7151(93)90044-S ↗
54. L.M. Brown, W.M. Stobbs, Philos. Mag., 23 (1971) 1185-99.10.1080/14786437108217405 ↗
55. Y. Brechet, J.D. Embury, S. Tao, L. Luo, Acta Mater., 39 (1991) 1781-86.10.1016/0956-7151(91)90146-R ↗
56. C.H. Cáceres, J.R. Griffiths, P. Reiner, Acta Mater., 44 (1996) 15-23.10.1016/1359-6454(95)00171-6 ↗
57. B. Zhang, A.V. Nagasekhar, X. Tao, Y. Ouyang, C.H. Cáceres, M. Easton, Mater. Sci. Eng. A, 599 (2014) 204-11, doi: 10.1016/j.msea.2014.01.074.10.1016/j.msea.2014.01.074 ↗