Comparison of the Influence of Temperature on the High-Strain-Rate Mechanical Responses of PBX 9501 and EDC37
Source abstract
Abstract
Many high-strain-rate compression measurements (2000 per second) using a specially designed split Hopkinson pressure bar (SHPB) for the plastic-bonded explosive PBX9501 have been reported in the literature, but there is a sparsity of data for a United Kingdom polymer-bonded explosives (PBX) known as EDC37. Both EDC37 and PBX9501 are cyclotetramethylenetetranitramine-based (HMX-based) PBXs with high filler contents. The binder systems for the PBXs are very different: EDC37 consists of a nitroplasticized nitrocellulose and PBX9501 a nitroplasticized ESTANE. PBX9501 exhibits nearly invariant fracture strains of ∼1.5 pct as a function of temperature at high strain rates, whereas EDC37 fails at ∼2 to 2.5 pct. The maximum compressive strengths for both PBXs were measured at 150 Mpa at −55 °C, but at +55 °C, the PBX was found to have a maximum strength of ∼55 MPa compared with ∼20 MPa for EDC37. Both PBXs exhibit an increasing loading moduli, E, with increasing strain rate or decreasing temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Energetic Materials and Combustion · High-Velocity Impact and Material Behavior · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. K.M. Roessig, J.C. Foster Jr., L.L. Wilson: Appl. Polym. Symp., 2001, vol. 20 (8), pp. 55–60
2. J.E. Field, S.J.P. Palmer, and P.H. Pope et al.: Proc. 8th Int. Symp. on Detonation, J.M. Short, ed., Naval Surface Weapons Center, White Oak, MD, 1985, pp. 635–44
3. D.A. Weigand: 20th Army Science Conf., Norfolk, VA, 1996, vol. I, pp. 63–67
4. P. Rae: Mathematical, Physical and Engineering Sciences, Proc. Royal Society, 2002, vol. 458, part 2019, pp. 743–62.10.1098/rspa.2001.0894 ↗
5. K.S. Ellis, C.L. Leppard, H. Radesk: J. Mater. Sci., 2005, vol. 40, pp. 6241–4810.1007/s10853-005-3148-4 ↗
6. C.M. Cady, W.R. Blumenthal, G.T. Gray III, and D.J. Idar: Polym. Eng. Sci., 2006, vol. 46 (6), pp. 812–1910.1002/pen.20540 ↗
7. G.T. Gray III, W.R. Blumenthal, D.J. Idar, and C.M. Cady: Shock Compression of Condensed Matter 1997, AIP Conf. Proc. 429, S.C. Schmidt et al., eds., New York, NY, 1998, pp. 583–8610.1063/1.55667 ↗
8. G.T. Gray III: ASM Handbook, vol. 8, Mechanical Testing and Evaluation, D. Medlin, ed., ASM International, Materials Park, OH, 1999
9. S.C. Chou, K.D. Robertson, J.H. Rainey: Exp. Mech., 1973, vol. 13, p. 42210.1007/BF02324886 ↗
10. B.J. Briscoe, R.W. Nosker: Polym. Commun., 1985, vol. 26, pp. 307–08.10.1016/0032-3861(85)90046-1 ↗
11. S.M. Walley, J.E. Field: Dymat. J., 1994, vol. 1, pp. 211–28
12. C.R. Siviour, M.J. Gifford, S.M. Walley, W.G. Proud, J.E. Field: J. Mater. Sci., 2004, vol. 39, pp. 1255–5810.1023/B:JMSC.0000013883.45092.45 ↗
13. J.E. Balzer, C.R. Siviour, S.M. Walley, W.G. Proud, J.E. Field: Proc. R. Soc. London A, 2004, vol. 460, pp. 781–80610.1098/rspa.2003.1188 ↗
14. S.J.P. Palmer, J.E. Field, J.M. Huntley: Proc. R. Soc. London A, 1993, vol. 440, pp. 399–41910.1098/rspa.1993.0023 ↗
15. T.N. Dey and J.R. Kamm: Proc. 11th Int. Detonation Symp., J.M. Short and J.E. Kennedy, eds., Office of Naval Research, Arlington, VA, pp. 725–34