journal article·2019-08-15

Optimization of Aluminum Alloy AA5083 for Superplastic and Quick Plastic Forming

H. Jin

Publisher page

Abstract

The high temperature formability of Al-4.6 wt pct Mg alloys with 0.5-1.5 wt pct Mn and 0.05-0.27 wt pct Fe has been evaluated by uni-axial tensile testing at 698.15 K to 798.15 K (425 °C to 525 °C) with strain rates from 2 × 10−5 to 8.75 × 10−2 s−1. The effects of Mn and Fe on the intermetallic phase, grain structure and cavitation were investigated and correlated to the superplastic behaviors. The superplasticity was found to be very dependent on the density, size and volume fraction of the Al6(Mn, Fe) particles. The increasing Mn and decreasing Fe not only refine and stabilize the grain structure, but also reduce the nucleation rate of cavities. Consequently, the grain boundary sliding is enhanced and the premature failure due to cavitation is retarded, resulting in a significant improvement of superplasticity. With optimized chemistry containing very high Mn, e.g., 1.7-1.9 wt pct, and very low Fe, e.g., below 0.1-0.15 wt pct, the maximum superplasticity could be achieved at 698.15 K to 773.15 K (425 °C to 500 °C) with strain rates from 10−4 to 10−2 s−1.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (73)

Show source-provided references
1. J.S. Vetrano, C.A. Lavender, C.H. Hamilton, M.T. Smith and S.M. Bruemmer: Script. Metal. Mater., 1994, vol. 30, pp. 565-70.10.1016/0956-716X(94)90430-8 ↗
2. A.J. Barnes: MRS Proc., 1999, vol. 601, pp. 207-21.10.1557/PROC-601-207 ↗
3. M.S. Rashid, C. Kim, E.F. Ryntz, F.I. Saunders, R. Verma and S. Kim: Quick Plastic Forming of Aluminum Alloy Sheet Metal, US Patent No. 6253588 B1, July 3, 2001.
4. L.D. Hefti: J. Mater. Eng. Perf., 2007, vol. 16, pp. 136-41.10.1007/s11665-007-9023-5 ↗
5. P.E. Krajewski and J.G. Schroth: Mater. Sci. Forum, 2007, vol. 551-552, pp. 3-12.10.4028/www.scientific.net/MSF.551-552.3 ↗
6. R. Grimes: Superplastic Forming of Aluminium Alloys, Superplastic Forming of Advanced Metallic Materials - Methods and Applications, Woodhead Publishing, Cambridge, 2011, Pages 247-71.10.1533/9780857092779.3.247 ↗
7. P.E. Krajewski and J.G. Schroth: Quick Plastic Forming of Aluminium Alloys, Superplastic Forming of Advanced Metallic Materials - Methods and Applications, Woodhead Publishing, Cambridge, 2011, Pages 272-303.10.1533/9780857092779.3.272 ↗
8. A.J. Barnes, H. Raman, A. Lowerson and D. Edwards: Mater. Sci. Forum, 2012, vol. 735, pp 361-71.10.4028/www.scientific.net/MSF.735.361 ↗
9. G. Giuliano and F. Samani: J. Testing and Evaluation, 2016, vol. 44, pp. 2114-9.10.1520/JTE20150299 ↗
10. A.T. Thomas: Acta Metall., 1966, vol. 14, pp. 1363-74.10.1016/0001-6160(66)90253-7 ↗
11. D.J. Lloyd: Metall. Trans., 1980, vol. 11A, pp. 1287-94.10.1007/BF02653482 ↗
12. K. Kannan, J.S. Vetrano and C.H. Hamilton: Metall. Mater. Trans., 1996, vol. 27A, pp. 2947-57.10.1007/BF02663844 ↗
13. Ø. Ryen, O. Nijs, E. Sjölander, B. Holmerdal, H-E. Ekström and E. Nes: Metall. Mater. Trans., 2006, vol. 37A, pp. 1999-2006.10.1007/s11661-006-0142-7 ↗
14. L.F. Mondolfo: Aluminum alloys: Structure and Properties, Butterworths, London, 1976.
15. L.F. Mondolfo: Manganese in Aluminium Alloys, The Manganese Centre, Neuilly-sur-Seine, France, 1978.
16. O. Kubaschewski: Iron-Binary Phase Diagrams, Springer, Berlin, 1982, pp. 5.
17. A. Lendvai: J. Mater. Sci., 1986, vol. 5, pp. 1219-20.
18. U.R. Kattner and B.P. Burton: Phase Diagrams of Binary Iron Alloys, ASM International, Materials Park, OH, 1992, pp. 12.
19. A. Verma, S. Kumar, P.S. Grant and K.Q. O’Reilly: J. Alloys and Compounds, 2013, vol. 555, pp. 274-82.10.1016/j.jallcom.2012.12.077 ↗
20. R.G. Hamerton, H. Cama and M.W. Meredith: Materials Science Forum, 2000, vol. 331-337, pp. 143-54.10.4028/www.scientific.net/MSF.331-337.143 ↗
21. S. Kumar, N. HariBabu, G.M. Scamans, Z. Fan and K.Q. Reilly: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 2842-54.10.1007/s11661-014-2229-x ↗
22. Rolling Aluminum: From the Mine Through the Mill, The Aluminum Association, Arlington, 1990.
23. Rogers Lumley: Fundamentals of Aluminium Metallurgy - Production, Processing and Applications, Woodhead Publishing, Cambridge, 2011.10.1533/9780857090256 ↗
24. L. Dupuy, J.J. Blandin and E.F. Rauch: Mater. Sci. Tech., 2000, vol. 16, pp. 1256-8.10.1179/026708300101507424 ↗
25. B. Huarte, C.J. Luis, R. Luri and J. Léon: Int. J. Comp. Mater. Sci. Surf. Eng., 2009, vol. 2, pp. 128-36.
26. H. Jin, M. Gallerneault, V.M. Segal, P.J. Young and D.J. Lloyd: Mater. Sci. Tech., 2011, vol. 27, pp. 789-92.10.1179/026708310X12701095964360 ↗
27. H. Jin: Mater. Sci. Tech., 2017, vol. 33, pp. 1696-702.10.1080/02670836.2017.1317954 ↗
28. I. Pushkareva and H. Jin: Mater. Sci. Forum, 2016, vol. 838-839, pp. 202-7.10.4028/www.scientific.net/MSF.838-839.202 ↗
29. H. Jin, B. ShalchiAmirkhiz and D.J. Lloyd: Metall. Mater. Trans., 2018, vol. 49A, pp. 1962-79.10.1007/s11661-018-4546-y ↗
30. J. Campbell: Materials, 2011, vol. 4, pp. 1271-86.10.3390/ma4071271 ↗
31. R.W. Hart: Acta Metall., 1967, vol. 15, pp. 351-5.10.1016/0001-6160(67)90211-8 ↗
32. J.D. Campbell: J. Mech. Phys. Solids, 1967, vol. 15, pp. 359-70.10.1016/0022-5096(67)90008-7 ↗
33. C. Rossard: Revue de Metall., 1966, vol. 63, pp. 225-36.10.1051/metal/196663030225 ↗
34. M.A. Khaleel, K.I. Johnson, C.H. Hamilton and M.T. Smith: Int. J. Plasticity, 1998, vol. 14, pp. 1133-54.10.1016/S0749-6419(98)00051-5 ↗
35. J. Pilling and N. Ridley: Superplasticity in crystalline solids, The Institute of Metals, London, 1989, pp. 102.
36. R. Grimes, M.J. Stowell and B.M. Watts: Met. Tech., 1976, vol.3, pp. 154-60.10.1179/030716976803391764 ↗
37. A.J. Barnes, M.J. Stowell, R. Grimes, D.B. Laycock and B.M. Watts: Key Eng. Mater., 2010, vol. 433, pp. 11-30.10.4028/www.scientific.net/KEM.433.11 ↗
38. J.A. Wert, N.E. Paton, C.H. Hamilton and M.W. Mahoney: Metall. Trans., 1981, vol. 12A, pp. 1265-76.
39. N. E. Paton, C. H. Hamilton, J. A. Wert and M. W. Mahoney: J. Metals, 1982, vol. 34, pp. 21-7.
40. M-A. Kulas, P.E. Krajewski, T.R. McNelley and E.M. Taleff: Hot Deformation of Aluminum Alloys III, TMS, Warrendale, PA, 2003, pp. 499-507.
41. M-A. Kulas, W.P. Green, E.M. Taleff, P.E. Krajewski and T.R. McNelley: Metall. Mater. Trans., 2006, vol. 37A, pp. 645-55.10.1007/s11661-006-0036-8 ↗
42. M.J. Stowell: Met. Sci., 1980, vol. 14, pp. 267-72.10.1179/030634580790426373 ↗
43. D.H. Bae and A.K. Ghosh: Acta Mater., 2002, vol. 50, pp. 993-1009.10.1016/S1359-6454(01)00399-8 ↗
44. D.H. Bae and A.K. Ghosh: Acta Mater., 2002, vol. 50, pp. 1011-29.10.1016/S1359-6454(01)00400-1 ↗
45. H. Jin and D.J. Lloyd: Alcan Kingston R&D Centre, Kingston, Ontario, unpublished research, 2004.
46. H. Watanabe, K. Ohori and Y. Takeuchi: Trans. Iron Steel Inst. Japan, 1987, vol. 27, pp. 730-3.10.2355/isijinternational1966.27.730 ↗
47. R. Verma and S. Kim: J. Mater. Eng. Perf., 2007, vol. 16, pp. 185-91.10.1007/s11665-007-9030-6 ↗
48. H.P. Godard, W.B. Jepson, M.R. Bothwell, R.L. Kane: The corrosion of light metals, John Wiley & Sons, Inc., New York (1967), pp. 70-3.
49. N. Hansen: Mem. Sci. Rev. Met., 1975, vol. 72, pp. 189-203.
50. F.J. Humphreys: Acta Metall., 1977, vol. 25, pp. 1323-44.10.1016/0001-6160(77)90109-2 ↗
51. F.J. Humphreys and M. Hatherly: Recrystallization and related annealing phenomena, Elsevier, Pergamon, 1995.
52. C.S. Smith: Trans. Metall. Soc. AIME, 1948, vol. 175, pp. 15-51.
53. P.A. Manohar, M. Ferry and T. Chandra: ISIJ Inter., 1998, vol. 38, pp. 913-24.10.2355/isijinternational.38.913 ↗
54. M.J. Stowell: Met. Sci., 1983, vol. 17, pp. 1-11.10.1179/030634583790427513 ↗
55. H.J. Frost: Deformation Mechanism Maps, Ph.D. Thesis, Harvard University, 1974, pp. 132.
56. D.H. Bae and A.K. Ghosh: Acta Mater., 2002, vol. 50, pp. 511-23.10.1016/S1359-6454(01)00375-5 ↗
57. R. Raj and M.F. Ashby: Acta Metall., 1975, vol. 23, pp. 653-66.10.1016/0001-6160(75)90047-4 ↗
58. R. Raj: Acta Metall., 1978, vol. 26, pp. 995-1006.10.1016/0001-6160(78)90050-0 ↗
59. M.A. Khaleel, H.M. Zbib and E.A. Nyberg: Int. J. Plasticity, 2001, vol. 17, pp. 277-96.10.1016/S0749-6419(00)00036-X ↗
60. D. Hull and D.E. Rimmer: Phil. Mag., 1959, vol. 4, pp. 673-87.10.1080/14786435908243264 ↗
61. M.V. Speight and W. Beere: Metal Sci., 1975, vol. 9, pp. 190-1.10.1179/030634575790445161 ↗
62. R. Raj, H.M. Shih and H.H. Johnson: Script. Metall., 1977, vol. 11, pp. 839-42.10.1016/0036-9748(77)90333-7 ↗
63. J.W. Hancock: Metal Sci., 1976, vol. 10, pp. 319-25.10.1179/msc.1976.10.9.319 ↗
64. A.C.F. Cocks and M.F. Ashby: Metal Sci., 1982, vol. 16, pp. 465-74.10.1179/msc.1982.16.10.465 ↗
65. M.J. Stowell, D.W. Livesey and N. Ridley: Acta Metall., 1984, vol. 32, pp. 35-42.10.1016/0001-6160(84)90199-8 ↗
66. H. Jin and A. Gerlich: Mater. Sci. Technol., 2019, in press.
67. P.A. Friedman and A.K. Ghosh: Metall. Mater. Trans., 1996, vol. 27A, pp. 3827-39.10.1007/BF02595632 ↗
68. R.M. Cleveland, A.K. Ghosh and J.R. Bradley: Mater. Sci. Eng., 2003, vol. A351, pp. 228-36.10.1016/S0921-5093(02)00848-1 ↗
69. R. Kaibyshev, E. Avtokratova, A. Apollonov and R. Davies: Script. Mater., 2006, vol. 54, pp. 2119-24.10.1016/j.scriptamat.2006.03.020 ↗
70. A. Smolej, B. Skaza, B. Markoli, D. Klobčar, V. Dragojević and E. Slaček: Mater. Sci. Forum, 2012, vol. 706-709, pp. 395-401.10.4028/www.scientific.net/MSF.706-709.395 ↗
71. H. Jin, M. Gallerneault and D.J. Lloyd: Alcan Kingston R&D Centre, Kingston, Ontario, unpublished research, 2004.
72. J.A.S. Green: Aluminum Recycling and Processing for Energy Conservation and Sustainability, ASM International, Materials Park, Ohio, 2007.
73. L. Zhang, J. Gao, L. Damoah and D.G. Robertson: Mineral Proc. Extra. Metal. Rev., 2012, vol. 33, pp. 99-157.10.1080/08827508.2010.542211 ↗